Experimental Analysis of the Development of Compressive Strength, Modulus of Elasticity and Acoustic Emission Parameters of Alkali-Activated Composites

Article Preview

Abstract:

This paper describes an experiment focused on monitoring the development of the modulus of elasticity and the compressive strength of composites that are based on alkali‑activated slag (AAS) during the first 28 days of ageing. The test specimens were tested at the age of 3 and 28 days using two non-destructive methods (ultrasonic pulse and resonance methods) to determine the value of the dynamic modulus of elasticity. Subsequently, the same specimens were used to determine the static modulus of elasticity using compressive stress test, during which the behaviour of the composite was monitored by equipment for recording the acoustic emission in the material. The result of the experiment is the evaluation of the behaviour of the AAS composite in regard to the development of its modulus of elasticity and compressive strength, as well as in regard to the acoustic emission method during loading.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

266-271

Citation:

Online since:

January 2018

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2018 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] V. Bílek Jr., L. Pařízek, L. Kalina, Effect of the by-pass cement-kiln dust and fluidized-bed-combustion fly ash on the properties of fine-grained alkali-activated slag-based composites, Mater. Technol. 49 (2015) 4, 549–552.

DOI: 10.17222/mit.2014.162

Google Scholar

[2] J. L. Provis, J. S. J. van Deventer (Eds. ), Alkali Activated Materials: State-of-the-art report, RILEM TC 224-AAM, vol. 13, Springer, (2014).

DOI: 10.1007/978-94-007-7672-2

Google Scholar

[3] V. Bílek Jr., L. Kalina, R. Novotný, J. Tkacz, L. Pařízek, Some Issues of Shrinkage-Reducing Admixtures Application in Alkali-Activated Slag Systems, Materials 9 (2016) 462.

DOI: 10.3390/ma9060462

Google Scholar

[4] M. Palacios, F. Puertas, Effectiveness of Mixing Time on Hardened Properties of Waterglass-Activated Slag Pastes and Mortars, ACI Materials Journal, 108 (2011), 73–78.

DOI: 10.14359/51664218

Google Scholar

[5] B. Kucharczyková, V. Bílek Jr., D. Kocáb, O. Karel, Shrinkage of Fine-Grained Composites Based on Alkali- Activated Slag, Non-traditional Cement & Concrete, Brno, 2017, 20-21.

DOI: 10.4028/www.scientific.net/kem.761.7

Google Scholar

[6] V. Bílek Jr., L. Kalina, J. Koplík, M. Mončeková, R. Novotný, Effect of a combination of fly ash and shrinkage-reducing additives on the properties of alkali-activated slag-based mortars, Mater. Technol. 50 (2016) 5, 813–817.

DOI: 10.17222/mit.2015.133

Google Scholar

[7] F. Collins, J. Sanjayan, Workability and mechanical properties of alkali activated slag concrete, Cem. Concr. Res., 29 (1999) 455–458.

DOI: 10.1016/s0008-8846(98)00236-1

Google Scholar

[8] C. J. Shi, R. L. Day, A calorimetric study of early hydration of alkali-slag cements, Cem. Concr. Res., 25 (1995) 1333–1346.

DOI: 10.1016/0008-8846(95)00126-w

Google Scholar

[9] F. Collins, J. Sanjayan, Cracking tendency of alkali-activated slag concrete subjected to restrained shrinkage, Cem. Concr. Res., 30 (2000) 791–798.

DOI: 10.1016/s0008-8846(00)00243-x

Google Scholar

[10] ČSN 73 1371 Nedestruktivní zkoušení betonu - Ultrazvuková impulzová metoda zkoušení betonu, Praha, ÚNMZ, (2011).

DOI: 10.51704/cjce.2016.vol2.iss1.pp76-82

Google Scholar

[11] ČSN 73 1372 Nedestruktivní zkoušení betonu - Rezonanční metoda zkoušení betonu, Praha, ÚNMZ, (2012).

DOI: 10.51704/cjce.2016.vol2.iss1.pp76-82

Google Scholar

[12] ČSN ISO 1920-10 Zkoušení betonu - Část 10: Stanovení statického modulu pružnosti v tlaku, Praha, ÚNMZ, (2016).

Google Scholar

[13] ZD Rpety-DAKEL: Diagnostická metoda akustické emise a její perspektivy, TECHMagazín, 3 (2011) 1-2.

Google Scholar

[14] L. Pazdera, J. Smutný. P. Mazal, Využití metody akustické emise při sledování vlastností zatěžovaných materiálů a konstrukcí, Vysoké učení technické v Brně, Brno, (2004).

Google Scholar

[15] M. Kreidl, R. Šmíd, Technická diagnostika: senzory, metody, analýza signálu, 1. ed., BEN - technická literatura, (2006).

Google Scholar

[16] V. Malhorta, A. N. Carino, Handbook on nondestructive testing of concrete, 2. ed., CRC Press, Boca Raton, (2004).

Google Scholar

[17] M. Collepardi, The New Concrete, 1st ed., Grafiche Tintoretto, Treviso, (2006).

Google Scholar