Paper Titles

Shake Table Testing of a Low Damage Steel Building with Asymmetric Friction Connections (AFC)
p.400

Experimental Tests on Extended Stiffened End-Plate Joints within Equal Joints Project
p.406

Experimental Test of Welded Wide Flange Fuses
p.414

Shake Table Testing of Lightweight Steel Drywall Nonstructural Components
p.423

Shake Table Tests of Structures with CFS Strap-Braced Stud Walls
p.432

Seismic Tests of Welded Moment Resisting Connections Made of Laser-Welded Stainless Steel Sections
p.440

Experimental Tests for Pre-Qualification of a Set of Buckling-Restrained Braces
p.450

Behaviour of Square Tubular Columns in Connection to I Beams with Welded Reverse Channel under Experimental Tests
p.458

Shake Table Test of a Half-Scale 2-Storey Steel Building Seismically Retrofitted Using Rocking Braced Frame System
p.466

HomeKey Engineering MaterialsKey Engineering Materials Vol. 763Shake Table Tests of Structures with CFS...

Shake Table Tests of Structures with CFS Strap-Braced Stud Walls

Article Preview

Abstract:

The unconventionality of the cold-formed steel (CFS) structures raised, in recent times, a lot of interest from many national and international companies resulting in the promotion of experimental activity with the main aim of investigating the seismic behaviour of these systems. In this perspective, a research project carried out at the University of Naples “Federico II” and funded by Lamieredil S.p.A. company started in the last years. The study included an extended experimental campaign, involving shake table tests on two three-storey prototypes in reduced scale (1:3). The investigated lateral load resisting systems were CFS strap-braced stud walls, designed as low dissipative seismic structures. The present paper illustrates case study, prototypes, test program and main shake table tests results.

You might also be interested in these eBooks

Behaviour of Steel Structures in Seismic Areas

Info:

Periodical:

Key Engineering Materials (Volume 763)

Pages:

432-439

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.763.432

Citation:

Cite this paper

Online since:

February 2018

Authors:

Maria Teresa Terracciano, Bianca Bucciero, Tatiana Pali, Vincenzo Macillo, Luigi Fiorino*, Raffaele Landolfo

Keywords:

CFS Strap-Braced Stud Walls, Lightweight Steel, Reduced Scale, Seismic Performance, Shake Table Tests

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2018 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Fiorino, L., Landolfo, R., Della Corte, G. 2006. Lateral Response of Sheathed Cold-Formed Shear Walls: An Analytical Approach. In Proceedings of the 18th International Specialty Conference on Cold-formed Steel Structures. Orlando, FL, USA. pp.603-619.

DOI: 10.1061/40889(201)48

[2] Fiorino, L. Macillo, V., Landolfo, R. 2017. Shake table tests of a full-scale two-story sheathing-braced cold-formed steel building. Engineering Structures, Elsevier Science. ISSN 0141-0296, Vol. 151, p.633.

DOI: 10.1016/j.engstruct.2017.08.056

[3] Macillo, V., Fiorino, L., Landolfo, R. 2017. Seismic response of CFS shear walls sheathed with nailed gypsum panels: Experimental tests. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 120, pp.161-171.

DOI: 10.1016/j.tws.2017.08.022

[4] Fiorino, L., Shakeel S., Macillo, V., Landolfo, R. 2017. Behaviour factor (q) evaluation the CFS braced structures according to FEMA P695. Journal of Constructional Steel Research, Elsevier Science, ISSN 0143-974X. Vol. 138, pp.324-339.

DOI: 10.1016/j.jcsr.2017.07.014

[5] Fiorino, L., Pali, T., Bucciero, B., Macillo, V., Terracciano, M.T., Landolfo, R. 2017. Experimental study on screwed connections for sheathed CFS structures with gypsum or cement based panels. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 116, pp.234-249.

DOI: 10.1016/j.tws.2017.03.031

[6] Fiorino, L., Macillo, V., Landolfo, R. 2017. Experimental characterization of quick mechanical connecting systems for cold-formed steel structures. Advances in Structural Engineering, Multi-Science. ISSN 1369-4332, Vol. 20, No. 7, pp.1098-1110.

DOI: 10.1177/1369433216671318

[7] Fiorino, L., Iuorio, O., Macillo, V., Terracciano, M.T., Pali, T., Landolfo, R. 2016. Seismic Design Method for CFS Diagonal Strap-Braced Stud Walls: Experimental Validation. Journal of Structural Engineering. ASCE. ISSN 0733-9445. Vol. 142, No. 3, pp.04015154-12.

DOI: 10.1061/(asce)st.1943-541x.0001408

[8] Landolfo, R., Fiorino, L., Iuorio, O. 2010. A Specific Procedure for Seismic Design of Cold-Formed Steel Housing. Advanced Steel Construction - an International Journal. ISSN 1816-112X. Vol. 6, No. 1, pp.603-618.

DOI: 10.1016/j.tws.2009.02.004

[9] Fiorino, L., Iuorio, O., Landolfo, R. 2014. Designing CFS structures: The new school bfs in Naples. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 78, pp.37-47. doi: 10. 1016/j. tws. 2013. 12. 008.

DOI: 10.1016/j.tws.2013.12.008

[10] Iuorio, O., Fiorino, L., Landolfo, R. 2014. Testing CFS structures: The new school BFS in Naples. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 84, pp.275-288. doi: 10. 1016/j. tws. 2014. 06. 006.

DOI: 10.1016/j.tws.2014.06.006

[11] Iuorio, O., Macillo, V., Terracciano, M.T., Pali, T., Fiorino, L., Landolfo, R. 2014. Seismic response of Cfs strap-braced stud walls: Experimental investigation. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 85, pp.466-480.

DOI: 10.1016/j.tws.2014.09.008

[12] Fiorino, L., Shakeel, S. Macillo, V., Landolfo, R. 2017. Seismic response of CFS shear walls sheathed with nailed gypsum panels: Numerical modelling. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 122, pp.359-370.

DOI: 10.1016/j.tws.2017.10.028

[13] Terracciano M. T., Bucciero B., Macillo V., Pali T., Fiorino L., Landolfo R. 2016. Strap-braced CFS walls: experimental characterization of the seismic response. In Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, Timisoara, Romania. Dubina, D., Ungureanu, V. (eds. ). ECCS-European Convention for Constructional Steelwork. ISBN 978-92-9147-133-1, pp.835-842.

DOI: 10.1016/j.tws.2014.09.008

[14] Fiorino, L., Macillo, V., Terracciano, M.T., Pali, T., Bucciero, B., Landolfo, R. 2016. Experimental tests for the seismic response evaluation of cold-formed steel shear walls sheathed with nailed gypsum-based panels. In Proceedings of the 23th International Specialty Conference on Cold-formed Steel Structures. Baltimore, MD, USA. pp.807-821.

DOI: 10.1002/cepa.336

[15] Macillo, V., Bucciero, B., Terracciano, M.T., Pali, T., Fiorino, L., Landolfo, R. 2017. Shaking table tests on cold-formed steel building sheathed with gypsum panels. In Proceedings of the 8th European Conference on Steel and Composite Structures (Eurosteel 2017). Naples, Italy. Jönsson, J. (ed. ). Published by Ernst & Sohn. ISBN 978-92-9147-121-8. Vol. 1, No. 2-3, pp.2847-2856.

DOI: 10.1002/cepa.336

[16] Pali, T., Bucciero, B., Terracciano, M.T., Macillo, V., Fiorino, L., Landolfo, R. 2017. In-plane quasi-static cyclic tests on lightweight steel drywall non-structural partition walls. In Proceedings of the 8th European Conference on Steel and Composite Structures (Eurosteel 2017). Naples, Italy. Jönsson, J. (ed. ). Published by Ernst & Sohn. ISBN 978-92-9147-121-8. Vol. 1, No. 2-3, pp.2847-2856.

DOI: 10.1002/cepa.337

[17] Fiorino, L., Terracciano M.T., Landolfo, R. 2016. Experimental investigation of seismic behaviour of low dissipative CFS strap-braced stud walls. Journal of Constructional Steel Research, Elsevier Science, ISSN 0143-974X. Vol. 127, pp.92-107.

DOI: 10.1016/j.jcsr.2016.07.027

[18] Ministero delle infrastrutture, D.M. 14/01/2008, Norme Tecniche per le Costruzioni.

[19] Macillo, V., Iuorio, O., Terracciano, M.T., Fiorino, L., Landolfo, R. 2014. Seismic response of Cfs strap-braced stud walls: Theoretical study. Thin-Walled Structures, Elsevier Science. ISSN 0263-8231. Vol. 85, pp.301-312.

DOI: 10.1016/j.tws.2014.09.006

[20] Harris, H.G., and Sabnis, G.M., Structural modeling and experimental techniques. CRC Press, Boca Raton, FL, (1999).

[21] ASCE/SEI. 2010. ASCE 7-10: Minimum Design Loads for Buildings and Other Structures,. American Society of Civil Engineers.

DOI: 10.1061/9780784412916.err