Study on Microstructure and Properties of Nanocomposite Coating Prepared on the Surface of Exhaust Pipe for Ship

Abstract:

Article Preview

In order to improve the high temperature oxidation resistance of exhaust pipes, the nanocomposite coatings are carried out on the surface of exhaust pipe by electrodeposition technology, and the microstructure and oxidation behavior of the nanocomposite coatings are investigated experimentally. This paper mainly focuses on the experimental work to determine the structural characteristics and oxidation resistance of nanocomposite coatings in presence of Al2O3 and cerium oxide CeO2. The results show that the amount of the Al2O3-CeO2 has significant influence on the structural properties of nanocomposite coatings. The surface of coating becomes more compact and smooth with the increase of the amount of the Al2O3 and CeO2. Furthermore, the anti-oxidation performance of the nanocomposite coatings formed with Al2O3 and CeO2 were both better than those of the composite coatings formed without Al2O3 and CeO2.

Info:

Periodical:

Edited by:

Hun Guo, Taiyong Wang, Zijing Wang, Hongfeng Wang and Ji Xu

Pages:

39-48

Citation:

Y. Shen et al., "Study on Microstructure and Properties of Nanocomposite Coating Prepared on the Surface of Exhaust Pipe for Ship", Key Engineering Materials, Vol. 764, pp. 39-48, 2018

Online since:

February 2018

Export:

Price:

$38.00

* - Corresponding Author

[1] D.T. Oloruntob, A.P.I. Popoola (2015). Effect of coating on induced thermal and tensile stress on the fracture of exhaust pipe material. Engineering Failure Analysis, Vol. 56, pp.562-572.

DOI: https://doi.org/10.1016/j.engfailanal.2014.09.005

[2] M.H. Allahyarzadeh, A. Ashrafi, A. Golgoon, B (2016). Roozbehani. Effect of pulse plating parameters on the structure and properties of electrodeposited NieMo films, Materials Chemistry and Physics, Vol. 175, pp.215-222.

DOI: https://doi.org/10.1016/j.matchemphys.2016.03.023

[3] A. Hovestad, L. J. J. Janssen (1995). Electrochemical codeposition of inert particles in a metallic matrix. Applied Electrochemistry, Vol. 25, Issue 6, pp.519-527.

DOI: https://doi.org/10.1007/bf00573209

[4] H. Zhao, L. Liu, J. Zhu, Y. Tang, W. Hu (2007). Microstructure and corrosion behavior of electrodeposited nickel prepared from a sulphamate bath. Materials Letters, Vol. 61, Issue 7, pp.1605-1608.

DOI: https://doi.org/10.1016/j.matlet.2006.07.178

[5] A. M. El-Sherik, U. Erb (1995). Synthesis of bulk nanocrystalline nickel by pulsed electrodeposition. Materials Science, Vol. 30, Issue 22, pp.5743-5749.

DOI: https://doi.org/10.1007/bf00356715

[6] Jinsong Chen, Yinhui Huang, Chanzhou Wei, Bin Qiao, Jianming Yang, Yiqiang He (2010). A study on Ni-Al2O3 nanocomposite coating prepared by jet electrodeposition. Advanced Composites Letters, Vol. 19, Issue 5, pp.184-188.

[7] Pradeep Tirlapur, M. Muniprakash, Meenu Srivastava(2016). Corrosion and Wear Response of Oxide-Reinforced Nickel Composite Coatings. Materials Engineering and Performance, Vol. 25, Issue 7, pp.2563-2569.

DOI: https://doi.org/10.1007/s11665-016-2117-1

[8] B. P. Bewlay, M. R. Jackson, P. R. Subramanian, J. -C. Zhao (2003). A review of very-high-temperature Nb-silicide-based composites. Metallurgical and Materials Transactions A, Vol. 34, Issue 10, p.2043-(2052).

DOI: https://doi.org/10.1007/s11661-003-0269-8

[9] L. Benea, P. L. Bonora, A. Borello and S. Martelli (2002). Effect of SiC size dimensions on the corrosion wear resistance of the electrodeposited composite coating. Materials and Corrosion, Vol. 53, pp.23-29.

DOI: https://doi.org/10.1002/1521-4176(200201)53:1<23::aid-maco23>3.0.co;2-0

[10] Ruidong Xu, Junli Wang, Lifang He, Zhongcheng Guo (2008). Study on the characteristics of Ni-W-P composite coatings containing nano-SiO2 and nano-CeO2 particles. Surface and Coatings Technology, Vol. 202, Issue 8, pp.1574-1579.

DOI: https://doi.org/10.1016/j.surfcoat.2007.07.012

[11] D.T. Oloruntoba, A.P.I. Popoola (2015). Effect of coating on induced thermal and tensile stress on the fracture of exhaust pipe material. Engineering Failure Analysis, Vol. 56, pp.562-572.

DOI: https://doi.org/10.1016/j.engfailanal.2014.09.005

[12] M.H. Allahyarzadeh, A. Ashrafi, A. Golgoon, B. Roozbehani (2016). Effect of pulse plating parameters on the structure and properties of electrodeposited Ni-Mo films. Materials Chemistry and Physics, Vol. 175, pp.215-222.

DOI: https://doi.org/10.1016/j.matchemphys.2016.03.023

[13] Hong-xing WANG, Yan ZHANG, Jia-lin CHENG, Yu-shan LI (2015).

[14] Wang Hongxing, Li Yingguang, Chu Chenglin (2011). Effects of CeO2 addition on microstructure and high temperature oxidation resistance of Ti-Al coating. Rare Metal Materials and Engineering, Vol. 40, Issue 2, pp.316-320.

[15] Xichao Li, Yuhai Qian, Lili Zheng, Jingjun Xu, Meishuan Li (2016). Determination of the critical content of Al for selective oxidation of Ti3AlC2 at 1100℃. The European Ceramic Society, Vol. 36, Issue 14, pp.3311-3318.

DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.05.008

[16] Fencheng Liu, Yuqing Mao, Xin Lin, Baosheng Zhou, Tao Qian (2016).

Fetching data from Crossref.
This may take some time to load.