Injection Moldable Poly(Lactic Acid)-Poly(Butylene Succinate)-Activated Carbon Composite Foams: Effects of PLA/PBS Ratios

Abstract:

Poly (lactic acid) (PLA)-poly (butylene succinate) (PBS)-activated carbon (AC) composites were foamed via an injection molding process. Azodicarbonamide (ADC) was used as a chemical blowing agent. The effect of PLA/PBS ratios (0/100, 10/90, 20/80, 30/70, 40/60, 50/50 wt% and vice versa) on the cell formation and properties of composite foams such as cellular structure, foam density (ρ_f), void fraction (V_f), cell density, melt flow index (MFI), thermal and mechanical properties and crystallinity were investigated. At same ADC and AC loadings (5 phr), PBS acted as nucleating sites for cell generation and expansion at low contents ( 40 wt%). However, the cell size had a tendency to decrease at high PBS concentrations (> 40 wt%). The cell density of composite foams was somewhat constant at PLA/PBS ratios up to 60/40 wt% and then continuously increased as the PBS dosage was higher than 40 wt%. The maximum reduction of foam density with the void fraction of 20% was obtained at the PLA/PBS ratio of 60/40. The melt viscosity of composite foams increased with the increase of PBS loadings. The tensile strength and Young’s modulus of composite foams decreased while the elongation at break and impact strength increased as the proportion of PBS increased. The cold crystallization temperature (T_cc) of PLA in the composite foam tended to decrease with the reduction of PLA contents while the melting temperatures (T_m) of PLA in composite foams fluctuated without any trend compared with those of the unfoamed PLA. The T_cc of PLA in composite foams could not be detected when the content of PBS was higher than 40 wt%. The crystallization temperature (T_c) and T_m of PBS in composite foams was almost unchanged for each PLA/PBS proportion compared with those of the unfoamed PBS. The crystallinity (X_c) of PLA in composite foams increased compared with the unfoamed PLA at PBS contents of 0-20 wt% due to the nucleating effect of PBS and AC. The X_c of PLA (at PBS > 20 wt%) and PBS in composite foams decreased with the reduction of each polymer.

• Periodical: Key Engineering Materials (Volume 798)
• Pages: 322-330
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.798.322
• Online since: April 2019
• Authors: Kittipong Hrimchum, Darunee Aussawasathien*, Todsapol Kajornprai
• Keywords: Activated Carbon, Composite Foam, Injection Molding, Poly(Butylene Succinate), Poly(Lactic Acid)(PLA)

References

[1] S. Pilla, Engineering applications of bioplastics and biocomposites-An overview, in: S. Pilla (Ed.), Handbook of Bioplastics and Biocomposites Engineering Applications, Scrivener Publishing LLC, Massachusetts, 2011, pp.1-14.

DOI: 10.1002/9781118203699.ch1

[2] G. Perego, G.D. Gella, C. Bastioli, Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties. J. Appl. Polym. Sci. 59 (1996) 37-43.

DOI: 10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n

[3] R.G. Sinclair, The case for polylactic acid as a commodity packaging plastic. J. Macromol. Sci. Pure Appl. Chem. 33 (1996) 585-597.

[4] S. Pilla, A. Kramschuster, L. Yang, J. Lee, S. Gong, L.S. Turng, Microcellular injection-molding of polylactide with chain-extender. Mater. Sci. Eng. C. 29 (2009) 1258-1265.

DOI: 10.1016/j.msec.2008.10.027

[5] C. Samuel, J.M. Raquez, P. Dubois, PLLA/PMMA blends: a shear-induced miscibility with tunable morphologies and properties?. Polymer 54 (2013) 3931-3939.

DOI: 10.1016/j.polymer.2013.05.021

[6] T. Malwela, S.S. Ray, Study of morphology and crystal growth behavior of nanoclay-containing biodegradable polymer blend thin films using atomic force microscopy. Polymer 53 (2012) 2705-2716.

DOI: 10.1016/j.polymer.2012.04.025

[7] V. Ojijo, T. Malwela, S.S. Ray, R. Sadiku, Unique isothermal crystallization phenomenon in the ternary blends of biopolymers polylactide and poly[(butylene succinate)-co-adipate] and nano-clay, Polymer 53 (2012) 505-518.

DOI: 10.1016/j.polymer.2011.12.007

[8] C.P. Park, Polyolefin foam, in: D. Klempner, V. Sendijarevic (Eds.), Handbook of Polymeric Foams and Foam Technology, Hanser Publishers, Munich, 2004, pp.233-299.

[9] N. Petchwattana, S. Covavisaruch, Influences of particle sizes and contents of chemical blowing agents on foaming wood plastic composites prepared from poly (vinyl chloride) and rice hull, Mater. Design 32 (2011) 2844-2850.

DOI: 10.1016/j.matdes.2010.12.044

[10] J. Zhou, Y. Zhengjun, C. Zhou, D. Wei, S. Li, Mechanical properties of PLA/PBS foamed composites reinforced by organophilic montmorillonite, J. Appl. Polym. Sci. 131 (2014) 1-8.

DOI: 10.1002/app.40773

[11] C.K. Singh, J.N. Sahu, K.K. Mahalik, C.R. Mohanty, B.R. Mohan, B.C. Meikap, Studies on the removal of Pb (II) from wastewater by activated carbon developed from Tamarind wood activated with sulphuric acid, J. Hazard. Mater. 153 (2008) 221-228.

DOI: 10.1016/j.jhazmat.2007.08.043

[12] R.H. Hesas, A. Arami-Niya, W.M.A.W. Daud, J.N. Sahu, Preparation and characterization of activated carbon from apple waste by microwave-assisted phosphoric acid activation: Application in methylene blue adsorption, Bioresources 8 (2013) 2950-2966.

DOI: 10.15376/biores.8.2.2950-2966

[13] A. Bratovčić, A. Odobašić, S. Ćatić, I. Šestan, Application of polymer nanocomposite materials in food packaging, Croat. J. Food Sci. Technol. 7 (2015) 86-94.

[14] E.A. Blair, ASTM special publication, Resinography. Cell. Plast. 414 (1967) 84.