NURBS-Based Upper Bound Limit Analysis of FRP Reinforced Masonry Vaults through an Efficient Mesh Adaptation Scheme

Abstract:

Masonry vaults represent one of the typical structural typologies in historical masonry buildings. The study of the ultimate behavior of masonry vaults, together with the need to design adequate retrofitting techniques, is of high relevance in the optics of the preservation of the cultural heritage. In this paper, a new approach for the limit analysis of masonry construction is applied to FRP reinforced masonry vaults. This approach relies on the representation of geometry through NURBS surfaces, upper bound formulation of limit analysis, idealization of the structure as an assembly of rigid bodies with dissipation allowed only along interfaces, and optimization by means of a mesh adaptation scheme. The presence of FRP strips can be taken into account in easy way, because they can be included simply by adding NURBS surfaces and assigning them an adequate delamination stress value. The efficient mesh adaptation is performed by means of a Prey Predator Algorithm, which has been proven to be very suited for these problems. The strength of the proposed method lies in an accurate estimation of load-bearing capacity and collapse mechanism obtained with a model which requires a very low computational effort.

• Periodical: Key Engineering Materials (Volume 817)
• Pages: 205-212
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.817.205
• Online since: August 2019
• Authors: Nicola Grillanda*, Andrea Chiozzi, Gabriele Milani, Antonio Tralli
• Keywords: Fibre Reinforced Polymer (FRP), Masonry Vaults, Mesh Adaptation, NURBS, Upper Bound Limit Analysis

References

[1] M. Valente, G. Milani, Damage assessment and partial failure mechanisms activation of historical masonry churches under seismic actions: three case studies in Mantua, Eng. Fail. Anal. 92 (2018) 495–519.

DOI: 10.1016/j.engfailanal.2018.06.017

[2] M. Valente, G. Milani, Seismic response and damage patterns of masonry churches: seven case studies in Ferrara, Italy, Eng. Struct. 177 (2018) 809–835.

DOI: 10.1016/j.engstruct.2018.08.071

[3] M. Valente, G. Milani, Damage survey, simplified assessment, and advanced seismic analyses of two masonry churches after the 2012 Emilia earthquake, Int. J. Archit. Herit. (2018). In press. doi:https://doi.org/10.1080/15583058.2018.1492646.

DOI: 10.1080/15583058.2018.1492646

[4] M. Valente, G. Milani, Damage assessment and collapse investigation of three historical masonry palaces under seismic actions, Eng. Fail. Anal. 98 (2019) 10–37.

DOI: 10.1016/j.engfailanal.2019.01.066

[5] M. Valente, G. Milani, Earthquake-induced damage assessment and partial failure mechanisms of an Italian Medieval castle, Eng. Fail. Anal. 99 (2019) 292–309.

DOI: 10.1016/j.engfailanal.2019.02.008

[6] M. Como, Statics of historic masonry constructions, Berlin Heidelberg, (2013).

[7] S. Huerta Fernández, The Analysis of Masonry Architecture: A Historical Approach, Archit. Sci. Rev. 51 (2011) 297–328.

[8] J. Heyman, The stone skeleton, Int. J. Solids Struct. 2 (1966) 249–256.

[9] G. Vasconcelos, P.B. Lourenço, Assessment of the In-plane shear strength of stone masonry walls by simplified models, in: 5th Int. Conf. Struct. Anal. Hist. Constr., New Delhi, India, (2006).

[10] M. Gilbert, C. Casapulla, H.M. Ahmed, Limit analysis of masonry block structures with non-associative frictional joints using linear programming, Comput. Struct. 84 (2006) 873–887.

DOI: 10.1016/j.compstruc.2006.02.005

[11] M.R. Valluzzi, C. Modena, Experimental analysis and modelling of masonry vaults strengthened by FRP, in: 3th Int. Semin. Hist. Constr., 2001: p.627–636.

[12] P. Foraboschi, Strengthening of Masonry Arches With Fiber Reinforced Polymer Strips, J. Compos. Constr. 8 (2004) 191–202.

DOI: 10.1061/(asce)1090-0268(2004)8:3(191)

[13] L. Ascione, L. Feo, F. Fraternali, Load carrying capacity of 2D FRP/strengthened masonry structures, Compos. Part B. 36 (2005) 619–626.

DOI: 10.1016/j.compositesb.2004.12.004

[14] D. V. Oliveira, I. Basilio, P.B. Lourenço, Experimental Behavior of FRP Strengthened Masonry Arches, J. Compos. Constr. 14 (2010) 312–322.

DOI: 10.1061/(asce)cc.1943-5614.0000086

[15] G. Milani, A. Tralli, A simple meso-macro model based on SQP for the non-linear analysis of masonry double curvature structures, Int. J. Solids Struct. 49 (2012) 808–834.

DOI: 10.1016/j.ijsolstr.2011.12.001

[16] E. Milani, G. Milani, A. Tralli, Limit analysis of masonry vaults by means of curved shell finite elements and homogenization, Int. J. Solids Struct. 45 (2008) 5258–5288.

DOI: 10.1016/j.ijsolstr.2008.05.019

[17] P. Block, J. Ochsendorf, Thrust network analysis: A new methodology for three-dimensional equilibrium., J. Int. Assoc. Shell Spat. Struct. 48 (2007) 1–7.

[18] A. Chiozzi, G. Milani, A. Tralli, A Genetic Algorithm NURBS-based new approach for fast kinematic limit analysis of masonry vaults, Comput. Struct. 182 (2017) 187–204.

DOI: 10.1016/j.compstruc.2016.11.003

[19] A. Chiozzi, M. Malagù, A. Tralli, A. Cazzani, ArchNURBS: NURBS-Based Tool for the Structural Safety Assessment of Masonry Arches in MATLAB, J. Comput. Civ. Eng. 30 #401501 (2016) 1–11.

DOI: 10.1061/(asce)cp.1943-5487.0000481

[20] L. Piegl, W. Tiller, The NURBS Book, Springer, Berlin, 1995.

[21] R.L. Haupt, S.E. Haupt, Practical Genetic Algorithms, John Wiley & Sons, New York, (1998).

[22] A. Chiozzi, G. Milani, N. Grillanda, A. Tralli, An adaptive procedure for the limit analysis of FRP reinforced masonry vaults and applications, Am. J. Eng. Appl. Sci. 9 (2016) 735–745.

DOI: 10.3844/ajeassp.2016.735.745

[23] A. Chiozzi, G. Milani, N. Grillanda, A. Tralli, Fast and reliable limit analysis approach for the structural assessment of FRP-reinforced masonry arches, Key Eng. Mater. 747 (2017) 196–203.

DOI: 10.4028/www.scientific.net/kem.747.196

[24] A. Chiozzi, G. Milani, N. Grillanda, A. Tralli, A fast and general upper-bound limit analysis approach for out-of-plane loaded masonry walls, Meccanica. 53 (2018) 1875–1898.

DOI: 10.1007/s11012-017-0637-x

[25] A. Chiozzi, N. Grillanda, G. Milani, A. Tralli, UB-ALMANAC: An adaptive limit analysis NURBS-based program for the automatic assessment of partial failure mechanisms in masonry churches, Eng. Fail. Anal. 85 (2018) 201–220.

DOI: 10.1016/j.engfailanal.2017.11.013

[26] N. Grillanda, A. Chiozzi, F. Bondi, A. Tralli, F. Manconi, F. Stochino, A. Cazzani, Numerical insights on the structural assessment of historical masonry stellar vaults: the case of Santa Maria del Monte in Cagliari, Contin. Mech. Thermodyn. (2019) 1–24.

DOI: 10.1007/s00161-019-00752-8

[27] A.T. Vermeltfoort, Analysis and experiments of masonry arches, Hist. Constr. (2001) 489–498.

[28] P. Faccio, P. Foraboschi, E. Siviero, Masonry vaults reinforced with FPR strips, L'Edilizia. 7 (1999) 44–50.

[29] G. Milani, E. Milani, A. Tralli, Upper bound limit analysis model for FRP – reinforced masonry curved structures . Part II : Structural analyses, Comput. Struct. 87 (2009) 1534–1558.

DOI: 10.1016/j.compstruc.2009.07.010

[30] S.L. Tilahun, H.C. Ong, Prey-Predator Algorithm: A New Metaheuristic Algorithm for Optimization Problems, Int. J. Inf. Technol. Decis. Mak. 14 (2015) 1331–1352.

DOI: 10.1142/s021962201450031x

[31] S.L. Tilahun, H.C. Ong, Comparison between Genetic Algorithm and Prey-Predator Algorithm, Malaysian J. Fundam. Appl. Sci. 9 (2013) 167–170.

DOI: 10.11113/mjfas.v9n4.104

[32] J.A. Cottrell, T.J.R. Hughes, Y. Bazilevs, Isogeometric analysis: toward integration of CAD and FEA, John Wiley & Sons, (2009).

DOI: 10.1002/9780470749081

[33] R. McNeel, Rhinoceros: Nurbs Modeling for Windows, Robert McNeel & Associates, Seattle, (2008).

[34] P.R. Kennicott, Initial Graphics Exchange Specification, IGES 5.3, U.S. Product Data Association, 1966. https://books.google.com/books?id=FHPhGwAACAAJ&pgis=1.

[35] National Research Council, Instruction for the design, building and control of static retrofitting interventions through FRP composites, DT200-2013, (2013).