Effect of MgO•Sb2O5 on Fire Resistance and Physical and Mechanical Properties of Cable PVC-Plasticate

Article Preview

Abstract:

Based on magnesium carbonate and antimony oxide (V), MgO•Sb2O5 was obtained. In the formulation of fire-resistant cable PVC-plasticate, antimony (III) oxide was replaced by MgO•Sb2O5 and the fire resistance and physical and mechanical properties of the resulting compound were investigated. It is shown that the replacement of antimony (III) oxide in the composition of PVC cable compound MgO•Sb2O5 leads to the production of a compound that is not inferior in its characteristics to the original plastic compound. In particular, the fire resistance of cable PVC-plasticate, standard industrial formulation and with the obtained MgO•Sb2O5, is practically the same (OI=32%). It has been established that the physical and mechanical characteristics of the cable compound, when replacing antimony oxide (III) with MgO•Sb2O5 in the formulation, remain at the level of the original compound, while MgO×Sb2O5 will have a less negative impact on the environment.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

557-562

Citation:

Online since:

September 2021

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2021 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] I.B. Peshkov, E.I. Uvarov, Trends in the use of some polymer materials in the cable industry, Cables and wires. 2 (339) (2013) 3-6.

Google Scholar

[2] M.K. Kamenski, Application of polymer materials at the enterprises Of the Association "Elektrokabel», CABLE−news. 3 (2010) 55-61.

Google Scholar

[3] V.V. Guzeev, Structure and properties of filled polyvinylchloride, Scientific fundamentals and technologies, St. Petersburg, 2012, pp.50-125.

Google Scholar

[4] Guidelines for the development of PVC-based compositions / Edited by R.F. Grossman. Edited from English V,V, Guzeev, Scientific fundamentals and technologies, St. Petersburg, 2009, pp.34-105.

Google Scholar

[5] V.G. Nikolaev, Comparative evaluation of modern PVC compounds and halogen-free compositions based on polyolefins, Cables and wires. 5 (324) (2010) 19-26.

Google Scholar

[6] G.E. Zaikov, Aging, stabilization and combustion of polymers and composites. Part 1. General considerations, Rubber and rubber. 2 (2011) 36-38.

Google Scholar

[7] Yu.A. Mikhailin, Heat, heat and fire resistance of polymeric materials / Yu.A. Mikhailin, Scientific foundations and technologies, St. Petersburg, 2011, pp.40-150.

Google Scholar

[8] S.M. Lomakin, G.E. Zaikov, Flame retardants for polymers, Rubber and rubber. 4 (2010) 34-41.

Google Scholar

[9] N.L. Petrova, E.N. Egorova, N.F. Ushmarin, N.I. Kolcova, Investigation of the effect of combinations of antimony trioxide with non-toxic flame retardants on the fire resistance and properties of rubber based on general purpose rubbers, Journal of Applied Chemistry. 8 (88) (2015) 1227-1232.

DOI: 10.1134/s1070427215080236

Google Scholar

[10] A.V. Martinov, L.A. Mazina, O.R. Klyuchnikov, Modification of cable polyvinylchloride compounds of low flammability, Bulletin of the Technological University. 15 (19) (2016) 73-75.

Google Scholar

[11] R.I. Ableev, Actual problems in the development and production of non-flammable polymer compounds for the cable industry, CABLE – news. 6-7 (2009) 64-69.

Google Scholar

[12] V.M. Yanborisov, S.S. Borisevich, The mechanism of initiation and growth of polyene sequences during thermal destruction of polyvinyl chloride, Vysokomolek. conn. Serie A. 8 (47) (2005) 1478-1490.

Google Scholar

[13] N.A. Lavrov, K. Kolert, T.V. Lavrov, About the mechanism of destruction of polyvinylchloride, Bulletin of the St. Petersburg State Technological Institute (TU). 16 (42) (2012) 31-35.

Google Scholar

[14] L.M. Gukepsheva, R.B. Tkhakakhov, M.M. Begretov, E.R. Tkhakakhov, Influence of the concentration and degree of grinding of the fire retardant filler on the physical properties of PVC compositions, Plastics. 6 (2006) 13-14.

Google Scholar

[15] V.V. Guzeev, Rational choice of additives for PVC compositions, Polymeric material. 7-8 (2010) 38-48.

Google Scholar