Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials

Abstract:

Polymer coatings are increasingly used in mechanical engineering. In particular, sheet composite elements are created on their basis. But the question of the influence of vibration loads on the bearing capacity of composite structures remains relevant. This work presents the results of an experimental study of the operation of composite structures when exposed to vibration loads. The choice of the parameters of the test bench is due to the frequencies of natural vibrations of the specimens under study. The frequencies were determined using generally accepted approximations. A test bench was developed for carrying out measurements. A vibration-absorbing foundation was used, a support frame with the element was attached on elastic suspensions to the outer frame. A scheme for cutting sheet elements for tensile testing was developed. Nine sheet elements made of reinforced polymer material were tested. The influence of the number of loading cycles on the material ultimate strength is investigated. It was established that the presence of a reinforced polymer coating leads to a decrease in the vibration amplitude when approaching the resonance frequencies. This is due to the internal deformation of the polymer coating. After removing the vibration load, no cracks were found on the specimens.

• Periodical: Key Engineering Materials (Volume 910)
• Pages: 567-572
• DOI: https://doi.org/10.4028/p-cno390
• Online since: February 2022
• Authors: Sergei Koryagin, Oleg Sharkov*, Nikolay Velikanov
• Keywords: Composite Structures, Deformation, Polymer Coating, Strength, Vibration

References

[1] Gvozdkova S I and Shvartsburg L E 2017 Procedia Engineering 206 958–964.

[2] Dong R G, Welcome D E, Xu X S and McDowell T W 2020 International Journal of Industrial Ergonomics 77 102946.

[3] Vieler H, Karim A and Lechler A 2017 Robotics and Computer-Integrated Manufacturing 47 117–122.

DOI: 10.1016/j.rcim.2017.03.007

[4] Dubrovskiy A, Aliukov S, Dubrovskiy S and Alyukov A 2017 Lecture Notes in Engineering and Computer Science 2 679–684.

[5] Moheimani S O R, Halim D and Fleming A J 2003 Spatial Control of Vibration: Theory and Experiments (Singapore World Scientific Publishing) p.236.

[6] Munoa J, Beudaert X, Erkorkmaz K, Iglesias A, Barrios A and Zatarain M 2015 CIRP Annals 64(1) 385–388.

DOI: 10.1016/j.cirp.2015.04.106

[7] Hosseinabadi A H H and Altintas Y 2014 CIRP Journal of Manufacturing Science and Technology 7(3) 246–257.

[8] Guoa Z, Cao Y, Feng K, Guan H and Zhang T 2019 Mechanical Systems and Signal Processing 133 106271.

[9] Duan P and Ding X 2015 Journal of University of Shanghai for Science and Technology 37(6) 583–588.

[10] Chen Y, Wu H, Zhai J, Chen H, Zhu Q and Han Q 2019 Aerospace Science and Technology 84 1049–1058.

[11] Koryagin S I, Sharkov O V and Velikanov N L 2018 Materials Science Forum 938 46–53.

[12] Limarga A M, Duong T L, Gregori G and Clarke D R 2007 Surface and Coatings Technology 202(4–7) 693–697.

DOI: 10.1016/j.surfcoat.2007.07.021

[13] Kirpichnikov V Y, Koshcheev A P and Syatkovskii A I 2020 Journal of Applied Mechanics and Technical Physics 61(6) 968–971.

[14] Kulíšek V, Růžička M, Vrba P, Smolík J and Janota M 2019 Materials Today: Proceedings 12(2) 288–297.

DOI: 10.1016/j.matpr.2019.03.126

[15] Fantuzzi N, Bacciocchi M, Benedetti D and Agnelli J 2021 Composites Part C: Open Access 4 100096.

DOI: 10.1016/j.jcomc.2020.100096

[16] Bigdeli M and Monfared V 2021 International Journal of Engineering, Transactions B: Applications 34(2) 556–563.

[17] Cao Y, Zuo D, Zhao Y, Cao Z, Zhi J, Zheng G and Tay T E 2021 Composite Structures 261 13565.

[18] Yang M, Gui L, Hu Y, Ding G and Song C 2018 Results in Physics 8 1110–1118.

[19] Thomson W T 1996 Theory of vibration with applications (Boca Raton: CRC Press) p.560.