For Libraries For Publication Open Access Downloads About Us Contact Us
Paper Titles
Corrosion of Concrete in a Water Management Structure in Conditions of Biogenic Sulfuric Acid Aggression
p.55
Optimization of Water Activation Technology for the Production of Fine-Grained Concrete
p.63
Increasing the Speed of Formation of the Structure of Fine-Grained Concrete and its Strength
p.69
Expansion and Mitigation of Alkali-Silica Reaction in Binary Blended Concrete Confining Potentially Reactive Aggregates
p.75
Research of Properties and Rational Composition of Ecosafe Building Materials with Ash-and-Slag Waste from Masute Fuel and Coal Combustion
p.85
Utilization of Ethylene-Vinyl Acetate (EVA) Waste from Footwear Industry as Partial Replacement of Aggregates for Concrete Roof Tile
p.99
Elevated Temperature Basic Oxygen Furnace Slag Stabilisation of Desilicated Foundry Sand
p.105
Fabrication and Analysis of Thermal Insulation Ceiling Panel from Corn Husk Fiber
p.113
Alkali Activation of Solid Waste from Cable Wire Manufacturing Industry for Building and Construction
p.121

Research of Properties and Rational Composition of Ecosafe Building Materials with Ash-and-Slag Waste from Masute Fuel and Coal Combustion

Article Preview

Abstract:

The study evaluates the method for determination of the rational technical and economic indicators, namely the rational composition and flexural strength, of building materials containing ash-and-slag obtained from heat-and-electric power plant as waste from the combustion of masute and coal. Results of method application were obtained. The study is aimed on reduction of the negative technogenic impact on the lithosphere by developing an appropriate environmental protection technology for utilization of the mentioned above waste as a replacement of sand in building materials made of cement-sand mixture. The rational composition of the building materials containing ash-and-slag waste granules was selected basing on the results of two stages of experimental research – mechanical bending tests of straight two-support beams on a rupture machine. It was proposed to provide a complex index for assessment of the efficiency of ash-and-slag waste disposal in the building materials, which refers to relation of the strength limit to the density of the material per unit value. The results of calculation of the index magnitudes were obtained.

You might also be interested in these eBooks
International Scientific Applied Conference "Problems of Emergency Situations" (PES 2023) View Preview
Structure and Building Materials View Preview

Info:

Periodical:

Key Engineering Materials (Volume 953)

Pages:

85-97

DOI:

https://doi.org/10.4028/p-RwzP9p

Citation:

Cite this paper

Online since:

August 2023

Authors:

Olexandr Kondratenko, Volodymyr Koloskov*, Hanna Koloskova, Vadym Babakin

Keywords:

Ash-and-Slag, Building Material, Cement-Sand Mixture, Density, Environment Protection Technologies, Granules of Bulk, Solid Waste, Strength

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2023 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

References

[1] Ecological passport of the region. Dnipropetrovsk region. 2020. 235 р. URL: https://menr.gov.ua/files/docs/eco_passport/2020/Дніпропетровської%20області%20за%2020%20 рік.pdf.

Google Scholar

[2] Ecological passport of the region. Dnipro region. 2020. Department of Transport and Environmental Protection of Dnipro City Council. 64 p.

Google Scholar

[3] Environmental Impact Assessment Report of "DTEK Dniproenergo" PJSC. Kyiv, Ministry of Environmental Protection of Ukraine. 2. (2018) 57–114.

Google Scholar

[4] O.M. Kondratenko, V.Yu. Koloskov, Yu.F. Derkach, S.A. Kovalenko, Physical and mathematical modeling of processes in particulate matter filter in practical application of criteria based assessment of ecological safety level : Monograph, Styl-Izdat, Kharkiv, 2020.

Google Scholar

[5] O. Kondratenko, V. Koloskov, S. Kovalenko, Yu. Derkach, Research of Technical and Economic Properties of Material of Porous Fuel Briquettes from the Solid Combustible Waste Impregnated with Liquid Combustible Waste, Materials Science Forum. 1038 (2021) 303–314.

DOI: 10.4028/www.scientific.net/msf.1038.303

Google Scholar

[6] S. Vambol, V. Vambol, O. Kondratenko, V. Koloskov, Y. Suchikova, Substantiation of expedience of application of high-temperature utilization of used tires for liquefied methane production, Journal of Achievements in Materials and Manufacturing Engineering. 87. 2 (2018) 77–84.

DOI: 10.5604/01.3001.0012.2830

Google Scholar

[7] S. Gavrylenko, V. Chelak, O. Hornostal, S. Gornostal, Rational parameters of waxes obtaining from oil winterization waste, Eastern-European Journal of Enterprise Technologies. 6. 10 (108) (2020) 29–35.

DOI: 10.15587/1729-4061.2020.219602

Google Scholar

[8] O. Kondratenko, V. Koloskov, S. Kovalenko, Y. Derkach, O. Strokov, Criteria based assessment of efficiency of conversion of reciprocating ICE of hybrid vehicle on consumption of biofuels, 2020 IEEE KhPI Week on Advanced Technology, KhPI Week 2020 (05–10 October 2020, Kharkiv, Ukraine), Conference Proceedings. (2020) 177–182.

DOI: 10.1109/khpiweek51551.2020.9250118

Google Scholar

[9] B. Pospelov, E. Rybka, R. Meleshchenko, P. Borodych, S. Gornostal, Development of the method for rapid detection of hazardous atmospheric pollution of cities with the help of recurrence measures, Eastern-European Journal of Enterprise Technologies. 1. 10 (97) (2019) 29–35.

DOI: 10.15587/1729-4061.2019.155027

Google Scholar

[10] S.O. Vambol, I.V. Mishchenko, V.Yu. Koloskov, O.M. Kondratenko, Ecological Safety Management Systems. Lecture notes, Kharkiv, NUCDU, 2018, 60 p.

Google Scholar

[11] V.M. Andrienko, S.V. Pozdeev, Yu.A. Otrosh, S.A. Yeremenko, O.M. Tyshchenko, O.V. Nekora Training manual "Buildings and structures and their behavior in fire conditions", Kyiv, IDUCZ, 2014, 295 p.

Google Scholar

[12] Yu.F. Derkach, V.Yu. Koloskov, O.M. Kondratenko, I.V. Mishchenko, G.O. Chernobay Applied Mechanics : Lecture couse. Kharkiv, NUCDU, 2020, 530 p.

Google Scholar

[13] Y. Otrosh, A. Kovalov, O. Semkiv, I. Rudeshko, V. Diven, Methodology remaining lifetime determination of the building structures, MATEC Web of Conferences. 230 (2018) 02023.

DOI: 10.1051/matecconf/201823002023

Google Scholar

[14] A. Kovalov, Y. Otrosh, O. Ostroverkh, O. Hrushovinchuk, Fire resistance evaluation of reinforced concrete floors with fire-retardant coating by calculation and experimental method. E3S Web of Conferences. 60. 00003 (2018).

DOI: 10.1051/e3sconf/20186000003

Google Scholar

[15] Y. Danchenko, V. Andronov, A. Kariev, V. Lebedev, E. Rybka, R. Meleshchenko, D. Yavorska, Research into surface properties of disperse fillers based on plant raw materials. Eastern-European Journal of Enterprise Technologies. 5. 12–89 (2017) 20–26.

DOI: 10.15587/1729-4061.2017.111350

Google Scholar

[16] O. Sierikova, E. Strelnikova, V. Gnitko and K. Degtyarev, Boundary Calculation Models for Elastic Properties Clarification of Three-dimensional Nanocomposites Based on the Combination of Finite and Boundary Element Methods, 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPIWeek). (2021) 351–356.

DOI: 10.1109/khpiweek53812.2021.9570086

Google Scholar

[17] Yu. Otrosh, O. Semkiv, E. Rybka, A. Kovalov, About need of calculations for the steel framework building in temperature influences conditions. IOP Conference Series: Materials Science and Engineering. (2019) № 708-1.

DOI: 10.1088/1757-899x/708/1/012065

Google Scholar

[18] A. Kovalov, Y. Otrosh, S. Vedula, O. Danilin, T. Kovalevska, Parameters of fire-retardant coatings of steel constructions under the influence of climatic factors. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. (2019) 46–53.

DOI: 10.29202/nvngu/2019-3/9

Google Scholar

[19] Yu. Otrosh, M. Surianinov, O. Holodnov, O. Starova, Experimental and computer researches of ferroconcrete beams at high-temperature influences. Materials Science Forum. 968 (2019) 355–360.

DOI: 10.4028/www.scientific.net/msf.968.355

Google Scholar

[20] A. Kovalov, Y. Otrosh, E. Rybka, T. Kovalevska, V. Togobytska, I. Rolin, Treatment of Determination Method for Strength Characteristics of Reinforcing Steel by Using Thread Cutting Method after Temperature Influence. Materials Science Forum. 1006 (2020) 179–184.

DOI: 10.4028/www.scientific.net/msf.1006.179

Google Scholar

© 2025 Trans Tech Publications Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies. For open access content, terms of the Creative Commons licensing CC-BY are applied.
Scientific.Net is a registered trademark of Trans Tech Publications Ltd.