Peculiarities Formation of Welded Joints under the External Electromagnetic Influence

Abstract:

Controlling the movement of liquid metal by selecting the parameters of an external electromagnetic effect makes it possible to change the conditions of dynamic equilibrium of the weld pool and, as a result, the formation of a weld. Magnetic process control has advantages over mechanical control methods, since it is carried out without contact with the welding zone. The study of processes leading to a decrease in the concentration of defects in metals, recombination of dislocations, polygonization, recrystallization, defect healing, etc., is an urgent task for technologists. The purpose of the work is to study the laws of formation of phase composition, microhardness, grain, lath, subgrain, dislocation structures of low-alloy steel welds in underwater welding and the relationship of structural parameters with the properties of strength and crack resistance of these joints. Microstructure studies were carried out by light, scanning, and transmission electron microscopy. Mathematical modelling was carried out to optimize the research efficiency. The developed computer application implements the idea of sequential calculation of quantities, where the value of the welding current and the current in the inductor is selected by the researcher. The influence of structural factors at the dislocation level on local internal stresses, which determine the deformation localization zones in the structures of the upper and lower bainites in the deposited metal, is analyzed. The conditions for obtaining high-quality welded joints in the welding of low-alloy steels, which ensure their strength and crack resistance, are established.

• Periodical: Key Engineering Materials (Volume 973)
• Pages: 73-79
• DOI: https://doi.org/10.4028/p-72TVPo
• Online since: February 2024
• Authors: Sergii Maksymov, Olena M. Berdnikova*, Olena A. Prilipko, Tetiana Alekseenko, Yevhen Polovetskyi
• Keywords: Affected Zone, Dislocation Structure Heat, External Electromagnetic Influence, Local Inner Stresses, Low-Alloy Steel, Mathematical Modelling, Microhardness, Microstructure, Underwater Welding, Welded Joints

References

[1] Ryzhov R.N., Kozhukhar V.A., Maksimov S.Yu. and Prilipko E.A., Application of external electromagnetic actions for improvement of mechanical properties of welds in underwater wet welding, Paton Welding Journal. 11 (2004) 49-51.

[2] N.V. Zaytseva, C. M. Zaharov, S. Yu. Maksimov, E.O. Prilipko, Underwater welding in an alternating magnetic field, Metallophysics and advanced technologies, 11 (2009) 1589-1596.

[3] Razmyshlyaev A.D. and Ageeva M.V., Influence of magnetic field on crystallization of welds in arc welding, Paton Welding Journal. 1 (2019) 25-27.

DOI: 10.15407/tpwj2019.01.05

[4] Ahieieva А. D., Rational using of the controlling longitudinal and transverse magnetic fields at arc welding and surfacing, IOP Conf. Series: Mater. Sci. and Eng. 582 (2019) 6.

DOI: 10.1088/1757-899x/582/1/012054

[5] Razmyshlyaev A.D., Ageeva M.V. and Lavrova E.V., Refinement of metal structure in arc surfacing under the effect of longitudinal magnetic field, Paton Welding Journal. 2 (2019)13-18.

DOI: 10.15407/tpwj2019.02.03

[6] Razmyshlyaev A.D. and Mironova M.V., Peculiarities of base metal penetration in arc surfacing in longitudinal magnetic field, Paton Welding Journal. 8 (2008) 18-21.

[7] Ryzhov R.N. and Kuznetsov V.D., External electromagnetic effects in the processes of arc welding and surfacing (Review), Paton Welding Journal. 10 (2006) 29-35.

[8] Ryzhov R.N. and Kuznetsov V.D., Choice of optimal parameters of external electromagnetic action in arc methods of welding, Paton Welding Journal. 6 (2005) 24-27.

[9] Hirsch P.B. Dislocation Distributions and Hardening Mechanisms in Metals, London, H.M.S.O., 1963.

[10] F. M. Kosevich, Dislocations in the theory of elasticity, Naukova dumka, Kiev 1978.

[11] L. N. Larikov, V. M. Falchenko, Effect of high-speed loading on mass transfer in iron, Effect of crystal structure defects on diffusion and mass transfer under pulsed action, Kiev, Institute of Metal Physics NASU (1980) 30-32.

[12] V. I. Alshits, V. L. Indenblom, Dislocation deceleration dynamics, Uspehi fizmat nauk, 115 (1975) 3-39.

[13] A.M. Koseviyach, Fundamentals of crystal lattice mechanics, M., "Nauka", 1972.

[14] V.V. Tonkiy, V. I. Zaytsev, B. P. Filatov, On the mechanism of formation of an ordered dislocation structure of metals, Ukrainian physical journal, 7 (1973) 1178-1181.

[15] L. N. Larikov, V. M. Falzhenko, D. S. Gertsriken, K. K. Khrenov, On the mechanism of the effect of a pulsed magnetic field on the mobility of atoms in iron and aluminum, DAN SSSR, 2 (1978) 312-314.

[16] D. S. Gertsriken, V. M. Kudinov, L. N. Larikov, V. M. Falzhenko, Effect of high-speed loading on mass transfer in iron, Kiev, Institute of Metal Physics NASU, 1980.

[17] L. N. Larikov, Healing defects in metals, Naukova dumka, Kiev, 1980.

[18] B.E. Paton, Selected Works, Institute of Electric Welding. E.O. Paton NAS of Ukraine, Kyiv, 2008.

DOI: 10.15407/dopovidi2017.06.036

[19] L.M. Lobanov, Science of materials, achievements, prospects,: Akademperiodika, Kyiv, 2018.

[20] Pozdnyakov V.D, Welding technologies for production and repair of metal structures from high-strength steels, Bulletin of the National Academy of Sciences of Ukraine. 1 (2017) 65-73.

[21] Yu. G. Gagen, T. A. Martynyuk, Influence of parameters of longitudinal magnetic field on the structure and mechanical properties of welded joints of oil and gas pipelines, Avtomaticheskaia Svarka 9 (1978) 37-41.

[22] O. V. Tozony, Mathematical models for calculating electric and magnetic fields, Naukova dumka, Kiev, 1964.

[23] V. F. Evdokimov, S. Yu. Maksimov, E. I. Petrushenko, E.O. Prilipko, E.A. Rybalkin, Three-dimensional integral model of welding current distribution during arc welding of a gap in a plate, Electronic simulation, 6 (2008) 3 – 18.

[24] L. Markashova, O. Berdnikova, A. Bernatskyi, V. Sydorets, O. Bushma, Crack Resistance of 14KhGN2MDAFB High-Strength Steel Joints Manufactured by Laser Welding, IOP Conference Series, Earth and Environmental Science. 224 (2019) 012013.

DOI: 10.1088/1755-1315/224/1/012013

[25] O. Berdnikova, V. Sydorets, T. Alekseienko, Structure and Properties of Laser-Welded Joints from High-Strength Steels, Applied Mechanics and Materials. 682 (2014) 240-245.

DOI: 10.4028/www.scientific.net/amm.682.240

[26] V.D. Poznyakov, L.I. Markashova, V.D. Shelyagin, S.L. Zhdanov, A.V. Bernats'kyi, O.M. Berdnikova, V.M. Sydorets', Cold Cracking Resistance of Butt Joints in High-Strength Steels with Different Welding Techniques, Strength of Materials, 51 (6) (2019) 843-851.

DOI: 10.1007/s11223-020-00132-7