p.35
p.45
p.53
p.63
p.71
p.81
p.89
p.99
p.111
Recycling of Zinc-Based Industrial Waste into Nanostructured Material for Potential Wastewater Treatment Applications
Abstract:
This work demonstrates the successful preparation of two types of photocatalytically active nanostructured materials from an industrial waste product – Sal Ammonia Skimming – using hydrochloric acid as a leaching medium. The whole production process was developed to prepare valuable ZnO nanomaterials in both fibrous and powdered forms. This involved a sequence of hydrometallurgical processing, needle-less electrospinning, and conventional calcination of recycled environmentally polluting industrial waste. The morphologies and phase composition of the resulting ZnO powder and ZnO fibers were analyzed using SEM, EDS, and XRD analyses. The impact of the morphology of the prepared nanomaterials on the photocatalytic efficiency of the ZnO-based photocatalyst – powder versus ZnO nanofibers – was evaluated through decolorization experiments of the commonly used methylene blue dye in batch mode. Methylene blue was chosen as a model substance for toxic industrial pollutants. A 25 W UVA lamp with an emission maximum at 365 nm was used as a light source. Removal efficiencies were carefully tested and compared for different nanomaterial morphologies and preparation conditions. The most photocatalytically active ZnO-based nanomaterial was the electrospun nanofibrous one calcined at 600 °C for 1 h. This material achieved 100 % removal of a 10−5 mol/L methylene blue dye from the solution within 700 minutes at an increased catalyst-to-dye ratio of 500 mg/50 ml. Based on the obtained results, it can be stated that the prepared materials exhibit high photocatalytic activity under UV light irradiation and have a potential for photocatalytic water remediation applications.
Info:
Periodical:
Pages:
71-77
DOI:
Citation:
Online since:
March 2026
Price:
Сopyright:
© 2026 Trans Tech Publications Ltd. All Rights Reserved
Share:
Citation: