Atmosphere Aggressivity State Mapping in Slovak Republic for Corrosion of Construction Materials

Abstract:

The paper is focused on the effect of multi-pollution of atmosphere on the construction degradation in the Slovak Republic. Corrosion increases the risk of failure, which has considerable impact on maintenance costs. The objective of the article is a creation of the proposal that should be used for processing of the corrosion maps for the various construction materials. It uses dose-response function that was developed based on long-term research. The corrosion map does not help to protect materials; however it can be useful for prediction of risks by design and analysis. The research done by the other researchers is taken into account also in our work. The results would be used as a basis for the beginning of a long-term research work.

• Periodical: Materials Science Forum (Volume 811)
• Pages: 49-56
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.811.49
• Online since: December 2014
• Authors: Ján Kozák*, Martina Ivašková, Peter Koteš
• Keywords: Carbon Steel, Concrete, Copper, Corrosion, Map of Corrosion, Material, Multi-Pollution of Atmosphere, Zinc

References

[1] B. Hadzima, T. Liptáková, Fundamentals of electrochemical corrosion of metals, University of Žilina, Žilina, 2008. (in Slovak).

[2] M. Černý, The corrosion properties of metallic structural materials, STNL Praha, Praha, 1984. (in Czech).

[3] T. Liptáková, I. Šestina, Fundamentals of corrosion and protection of metals in the gas industry, University of Žilina, Žilina, 1997. (in Slovak).

[4] M.G. Fontana, Materials science and engineering, McGraw-Hill, Inc., New York, (1986).

[5] J.P. Broomfield, Corrosion of steel in concrete, E & FN SPON, London, (1997).

[6] P. Pullar-Strecker, Corrosion Damaged Concrete, CIRIA, London, (1987).

[7] K. Kreislová, A. Koukalová, D. Knotková, Trends of corrosivity of the atmosphere and the corrosion loss of zinc in atmospheric conditions, The corrosion and protection of material, 5 (2011) 19-22. (in Czech).

[8] K. Kreislová, A. Koukalová, T. Laník, K. Hovorková, The life of the zinc coating on the construction of traffic infrastructure, Proceedings of the 17th Conference of hot-dip galvanizing, Ostrava, 2011, pp.39-44. (in Czech).

[9] D. Knotková, K. Kreislová, The corrosion behavior of metals and metal coatings in an atmospheric environment, SVÚOM Praha, 2010. (in Czech).

[10] Information on http: /www. corr-institute. se/ICP-Materials/web/page. aspx?sid=3293.

[11] M. Halama, K. Kreislová, J.V. Lysebettens, Prediction of Atmospheric Corrosion of Carbon Steel Using Artificial Neural Network Model in Local Geographical Regions, Corrosion: The Journal of Science and Engineering. Vol. 67, 6 (2011), 1-6.

DOI: 10.5006/1.3595099

[12] K. Kreislová, D. Knotková, I. Skořepová, Corrosion map of CZ for zinc, SVÚOM Praha, 2009. (in Czech).

[13] K. Kreislová, D. Knotková, I. Skořepová, Corrosion map of CZ for carbon steel, SVÚOM Praha, 2009. (in Czech).

[14] K. Kreislová, D. Knotková, I. Skořepová, Corrosion map of CZ for copper, SVÚOM Praha, 2009. (in Czech).

[15] STN EN ISO 8565 Metals and alloys - Atmospheric corrosion testing - General requirements, SUTN, (2011).

[16] J. Tidblad, V. Kučera, A.A. Mikhailov, J. Henriksen, K. Kreislová, T. Yates, B. Stӧckle, M. Schreiner, UN/ECE ICP Materials: Dose-response functions on dry and wet acid deposition effects after 8 years of exposure, Netherlands, 2001, pp.1458-1462.

DOI: 10.1007/978-94-007-0810-5_90

[17] Information on http: /www. corr-institute. se/MULTI-ASSESS.

[18] T. Spranger, U. Lorenz, H. -D. Gregor, Manual on methodologies and criteria for Modelling and Mapping Critical Loads & Levels and Air Pollution Effects, Risks and Trends, Umweltbundesamt, Berlin, (2004).

[19] STN EN ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation, SUTN, (2012).