Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0

Ho Sung Lee; Jong Hoon Yoon; Joon Tae Yoo; Kyung Ju Min

doi:10.4028/www.scientific.net/MSF.857.266

Paper Titles

Two-Step Solution Heat Treatment of AlSiCu Alloy for Improvement of Mechanical Properties
p.246

A New Free-Machining Steel Containing Bismuth and Calcium
p.251

The Effect of Solution Heat Treatment on Incipient Melting of Al₂Cu Intermetallic Phase in Lightweight Materials
p.256

Ageing Response of Powder Metallurgy AZ91 and AZ91 Reinforced with Multiwall Carbon Nanotube
p.261

Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0
p.266

Thermal Aging of Dissimilar-Metal Weld Joints for Reactor Pressurized Vessels at Elevated Temperature
p.271

Microstructural Evolution of Austenitic Stainless Steel AISI304 and AISI316 Subjected to High-Temperature Thermal Aging
p.276

Effect of Concentration of Oxalic Acid on the Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061
p.281

Segregation Measurement of Inconel 718 Feedstocks Used in Low-Pressure Metal Injection Molding
p.286

HomeMaterials Science ForumMaterials Science Forum Vol. 857Microstructure and Mechanical Properties of...

Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0

Abstract:

Aluminum-copper-lithium alloy is a light weight metal that has been used as substitute for conventional aerospace aluminum alloys. With addition of Li element, it has lower density but higher strength. However these aluminum alloys are hard to weld by conventional fusion welding, since they often produce porosities and cracking in the weld zone. It is known that solid state welding like friction stir welding is appropriate for joining of this alloy. In this study, friction stir welding was performed on AA2195 sheets, in butt joint configuration in order to understand effects of process parameters on microstructure and mechanical properties in the weld zone. The results include the microstructural change after friction stir welding with electron microscopic analysis of precipitates.

You might also be interested in these eBooks

Advanced Materials Engineering and Technology IV

View Preview

Info:

Periodical:

Materials Science Forum (Volume 857)

Pages:

266-270

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.857.266

Citation:

Cite this paper

Online since:

May 2016

Authors:

Ho Sung Lee*, Jong Hoon Yoon, Joon Tae Yoo, Kyung Ju Min

Keywords:

AA2195, Friction Stir Welding, Mechanical Properties, Micro-Hardness, Microstructure

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] https: /www. nasa. gov/pdf/63752main_ET_Overview_Wanda_print. pdf.

Google Scholar

[2] S. K. Tiwari, Dinesh Kumar Shukla, and R. Chandra, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering 7, 1315 (2013).

Google Scholar

[3] R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara, and A. K. Mukherjee, Scripta Materialia, 42, 163 (2000).

Google Scholar

[4] https: /www. nasa. gov/exploration/systems/sls/12-056. html.

Google Scholar

[5] Z. Wang, R. Shenoy, NASA/CR-1998-206914, NASA Langley Research Center, Hampton, VA, U.S.A., (1998).

Google Scholar

[6] C. Giummarra, B. Thomas, and R. J. Rioja, in Proceedings of the Light Metals Technology, September 24-26, 2007, Saint-Saveur, Quebec, Canada.

Google Scholar

[7] M. Maeda, L. Huijie, H. Fujii, and T. Shibayanagi, Welding in the World, 19 69-75 (2013).

Google Scholar

[8] H. S. Lee, Y. R. Lee, and K. J. Min, Effects of Friction Stir Welding Speed on AA2195 alloy, to be published in Materials Science Forum.

Google Scholar