Gas Atomizer Making to Produce Tin Powders

Kasem Pipatpanyanugoon; Chantra Nakvachiratrakul

doi:10.4028/www.scientific.net/MSF.872.216

Paper Titles

Effects of ZnO Addition on Fe₂O₃/Al₂O₃ Oxygen Carriers on CH₄ Reduction for Chemical Looping Combustion
p.196

Fantastic Carbon Material for Nickel/Carbon Support Catalyst Reducing via Calcination Enhanced with Hydrothermal Carbonization
p.201

Effect of Alkaline Activation on Low Grade Natural Kaolin for Synthesis of Zeolite A
p.206

Characterization of Diatomite, Leonardite and Pumice
p.211

Gas Atomizer Making to Produce Tin Powders
p.216

Metal Oxide Nanocomposites: Advantages and Shortcomings for Application in Conductometric Gas Sensors
p.223

Impedance Spectroscopic Inspection Toward Sensitivity Enhancement of Ag-Doped WO₃ Nanofiber-Based Carbon Monoxide Gas Sensor
p.230

The Improvement in Mechanical and Thermal Properties of Biodegradable Poly(Butylene Succinate) (PBS) Nanocomposites with Low Loadings of Graphene Oxide (XGO)
p.235

Preparation of Zeolite Nanocrystals via Hydrothermal and Solvothermal Synthesis Using of Rice Husk Ash and Metakaolin
p.242

HomeMaterials Science ForumMaterials Science Forum Vol. 872Gas Atomizer Making to Produce Tin Powders

Gas Atomizer Making to Produce Tin Powders

Abstract:

The objective of this research is to make an economical laboratory-scale, horizontal gas atomizer for producing tin powders. The procedures were designing a furnace, gas chamber and cyclone, and 2-nozzle air tubes. All equipments were built and assembled to be a gas atomizer. The gas atomizer was trial run by blowing nitrogen gas to molten tins. It produced powders in many sizes. The trial run had been repeated in many conditions. The variable conditions were the molten tin temperature, the 2-nozzle air tubes angle, and the gas pressure. The best trial run resulted, tin powder smaller than 150 μm was 75.4 %. The best conditions of trial run result were 300^o C of molten tin temperature, 30 degree of 2-nozzle air tubes angle, and 200 psi of gas pressure. The tin powder particles were spherical shape. This research can produce an economical laboratory-scale, horizontal gas atomizer for learning metal powder.

You might also be interested in these eBooks

Material and Manufacturing Technology VII

View Preview

Info:

Periodical:

Materials Science Forum (Volume 872)

Pages:

216-220

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.872.216

Citation:

Cite this paper

Online since:

September 2016

Authors:

Kasem Pipatpanyanugoon, Chantra Nakvachiratrakul

Keywords:

Gas Atomizer, Nitrogen Gas, Tin Powder

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Anchali Manonukul and Ruangdaj Tongsri. Construction of Environmental Low Load TypeAdvanced Production Processes of Parts for Car in Thailand which Uses Metal Injection Moulding (MIM) Process (2008).

Google Scholar

[2] Metal Powder Industries Federation, MPIF. Introducing PM (2012). Information on http: /www. mpif. org/IntroPM/intropm. asp?linkid=1.

Google Scholar

[3] John J. Dunkley. Atomization. In Metals Handbook, 10 th Ed., Vol. 7, Powder Metal Technologies and Application. American Society of Metal. Metals Park, OH. USA (1998).

Google Scholar

[4] Pachanee charoenying. Lead and Tin. 2nd. Nanmee Books. Bangkok, Thailand (2001).

Google Scholar

[5] Goodfellow. Tin (Sn) - Powder – Material Information (2013). Information on http: /www. goodfellow. com/E/Tin-Powder. html.

Google Scholar

[6] See, J.B. and Johnson, GH. Interactions between Nitrogen Jets and Liquid Lead and Tin Streams. Powder Technology. Vol. 21(1) (1978), pp.119-133.

DOI: 10.1016/0032-5910(78)80115-6

Google Scholar

[7] Monnapas Morakotjinda and et al. Gas Atomization of Low Melting-Point Metal Powders. Chiang Mai J. Sci. Vol. 37(1) (2010), pp.55-63.

Google Scholar