Porosity Developments within 9Cr-1Mo Steel Exposed to CO₂

Abstract:

When 9Cr-1Mo steel is exposed to CO₂-rich advance gas-cooled reactor (AGR) gases it forms a duplex oxide which consists of an outer Fe rich layer and an inner Cr rich spinel which provides oxidation resistance allowing the steel to resist the corrosive atmosphere of the plant. The oxide scale develops, growing both into the substrate and outwards from the initial metal/air interface. The spinel develops porosity through the coalescence of Fe vacancies which over time alters the properties of the oxide and potentially allows a transport network to form within the oxide. The porosity of the duplex oxide was measured using scanning electron microscopy of oxides on 9Cr steel samples oxidised in a CO₂ atmosphere. Results show that samples which have suffered breakaway oxidation show larger oxide scales with alternating Fe/Cr bands whereas samples which have yet to suffer from breakaway show higher peak porosity values but thinner oxide scales. Furthermore the samples which are currently under protective oxidation show a high max porosity peak in comparison to those which have suffered breakaway.

• Periodical: Materials Science Forum (Volume 941)
• Pages: 426-431
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.941.426
• Online since: December 2018
• Authors: Lawrence Coghlan*, Rebecca L. Higginson, Mark A.E. Jepson, Aya Shin, Jonathan Pearson
• Keywords: 9Cr Steels, Microstructure, Oxidation, Porosity

References

[1] Ennis, P. and Czyrska-Filemonowicz, A. Recent Advances in Creep Resistant Steels for Power Plant Applications,, Ommi, 1 (2002) 1–28.

DOI: 10.1007/bf02706455

[2] Rouillard, F., Moine, G., Martinelli, L. and Ruiz, J. C. Corrosion of 9Cr Steel in CO2 at intermediate temperature I: Mechanism of void-induced duplex oxide formation,, Oxidation of Metals, 77(2012) 27–55.

DOI: 10.1007/s11085-011-9271-5

[3] Gorman, D. M. and Fry, A. T. (2017) Porosity Connectivity Within the Spinel Layer of the 9Cr Steel Grade 91 when Exposed to High- Temperature Steam,, Oxidation of Metals. Springer US, 88 (2017). 435–446.

DOI: 10.1007/s11085-016-9674-4

[4] S. Swaminathan, C. Mallika, N. G. Krishna, C. Thinaharan, T. Jayakumar and U. Kamachi Mudali. Evolution of Surface Chemistry and Morphology of Oxide Scale Formed during Initial Stage Oxidation of Modified 9Cr–1Mo Steel., Corrosion Science 79 (2014) 59–68.

DOI: 10.1016/j.corsci.2013.10.026

[5] M. Schutze, D. Renusch and M. Schorr. Parameters Determining the Breakaway Oxidation Behaviour of Ferritic Martensitic 9%Cr Steels in Environments Containing H2O., Corrosion Engineering Science and Technology. 39 (2004) 157–66.

DOI: 10.1179/147842204225016921

[6] L. Martinelli, C. Desgranges, F. Rouillard, K. Ginestar, M. Tabarant and K. Rousseau. Comparative Oxidation Behaviour of Fe-9Cr Steel in CO2 and H2O at 550°C: Detailed Analysis of the Inner Oxide Layer., Corrosion Science. 100 (2015) 253–66.

DOI: 10.1016/j.corsci.2015.07.032

[7] J. Sumner, N. Simms, A. Shin and J. Pearson. Kinetics of Duplex Oxide Growth on 9Cr Steels Exposed in CO2: Application of Dimensional Metrology, Oxidation of Metals. 87 (2017) 617–29.

DOI: 10.1007/s11085-017-9766-9

[8] Z. Tökei, H. Viefhaus and H. J. Grabke. Initial Stages of Oxidation of a 9CrMoV-Steel: Role of Segregation and Martensite Laths., Applied Surface Science. 165 (2000): 23–33.

DOI: 10.1016/s0169-4332(00)00285-3