The Analysis of the Influence of Manufacturing Practice of Anode Paste on its Consumption

Olga V. Belousova; Ksenia V. Kostina

doi:10.4028/www.scientific.net/MSF.946.395

Paper Titles

Effect of Grain Boundaries Type on Carbides Precipitates in Tempered Martensite
p.368

Effect of Boron on the Microstructure and Mechanical Properties of Low-Carbon Tube Steel
p.374

Improving the Strength of Abrasive Wheels and Optimizing the Control over the Strength of Composite Abrasive Materials
p.380

Technology and Equipment for Plasma Electric Arc Granulation of Fused Welding Flux
p.389

The Analysis of the Influence of Manufacturing Practice of Anode Paste on its Consumption
p.395

Promising Directions for the Stabilization of Ferroalloy Production Slags
p.401

The Time and Heat Dependence of the Nitrogen Distribution upon Steel Alloying with Nitrided Manganese
p.406

Modeling of Material and Heat Balance of Ferromanganese Blast Furnace Smelting Using Computer Environment Lazarus
p.411

Non-Equilibrium Crystallization of a Eutectic Alloy - Mathematical Model
p.417

HomeMaterials Science ForumMaterials Science Forum Vol. 946The Analysis of the Influence of Manufacturing...

The Analysis of the Influence of Manufacturing Practice of Anode Paste on its Consumption

Abstract:

The article is devoted to the study of the impact of technological features of the anode paste production on one of the technical-and-economic indices – its consumption. It is shown that the prior thermal preparation significantly affects the quality characteristics of pitch and petroleum cokes. The comparison of pitches of foreign and homeland producers revealed the advantage of the last because of their small ash content and the lowered content of sodium. Granulometric composition of the dry mix is determined on the basis of different coke brands. They are close to the concentrations of fractions regulated by the technology of production of the anode paste. The conducted semi-industrial tests were in accordance with the laboratory studies and confirmed the fact of reducing the consumption of the anode paste when using the petroleum coke as a filler.

You might also be interested in these eBooks

Materials Science and Metallurgical Technology

View Preview

Info:

Periodical:

Materials Science Forum (Volume 946)

Pages:

395-400

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.946.395

Citation:

Cite this paper

Online since:

February 2019

Authors:

Olga V. Belousova*, Ksenia V. Kostina

Keywords:

Anode, Anode Paste, Coke, Coke-Pitch Composition, Economic Index, Pitch, Technical Index

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] V.G. Terent'ev, R.M. Shkolnikov, The aluminium smelting, Papirus-Art, (1998).

Google Scholar

[2] I.S. Grinberg, L. W, The aluminium smelting in top-worked pot, MANEB, (2003).

Google Scholar

[3] I.S. Grinberg, B.S. Gromov, The guide for a metallurgist. The aluminium smelting and manufacture of the alloys on its basis, MANEB, (2005).

Google Scholar

[4] I.V. Nikolaev, V.I. Moskvitin, B. A. Fomin, Metallurgy of light metals, Moscow, (1997).

Google Scholar

[5] A.A. Kostyukov, I.G. Kil, The guide on non-ferrous metals for a metallurgist. The aluminium smelting, Moscow, (1971).

Google Scholar

[6] М.М. Vetyukov, A.M. Tsyplakov, Aluminum and magnesium electrometallurgy, Moscow, (1987).

Google Scholar

[7] Yu.V. Borisoglebskiy, G.V. Galevskiy, Aluminum metallurgy, Novosibirsk: Nauka, (2000).

Google Scholar

[8] I.S. Grinberg, L.V. Ragozin, V.P. Lanshin, Manufacturing of anode paste, MANEB, (2003).

Google Scholar

[9] E.A Yanko, The anodes of aluminium electrolysers, Мoscow, (2001).

Google Scholar