The Design of Melting Units for Production of Synthetic Fibrous Materials by Vertical Blowing Method from PET Raw Materials

Abstract:

This paper presents the technology of production of synthetic fibrous materials from PET-raw by vertical blowing method. The formation of fibers from the melt of thermoplastics by vertical blowing method is accompanied by complex and specific phenomena, so creation of new progressive technologies, high-performance machines and units for producing such materials is impossible without process modeling, which can significantly reduce the number of natural tests, cost and development time and choose optimal operating modes. The motion of the molten material in the melting unit of the hydrostatic type is determined from the Poiseuille formula. Also in the article proved that the greatest impact on process productivity is made by the melting unit, exactly by outlet radius and the pressure change of compressed air, acting on the molten material surface. The increase in the height of the molten material column in the main cylindrical chamber of melting unit also leads to increase of process productivity.

• Periodical: Materials Science Forum (Volume 952)
• Pages: 216-222
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.952.216
• Online since: April 2019
• Authors: Vladislav Sviatskii, Andrea Mudriková, Radovan Holubek*, Jakub Horník, Mikhail Sokolov
• Keywords: Blow Head, Melting Unit, PET Raw, Synthetic Fibrous Material

References

[1] B.A. Sentyakov, K.P. Shirobokov, V.M. Sviatskii, Fibrous sorbent for the collection of oil based on polyethylene terephthalate. Prevention of accidents of buildings and structures: Collection of scientific papers, issue 9. - Moscow, (2010) – pp.631-634.

[2] V.M. Sviatskii, B.A. Sentyakov, M.A. Sviatskii, A.R. Tcherezov, Tests fibrous sorbent booms , Safety of vital functions. - №4. – (2015) – pp.27-29.

[3] K.M. Nampoothiri, N.R. Nair, R.P. John, An overview of the recent developments in polylactide (PLA) research, Bioresour. Technol., 101 (2010), pp.8493-8501, 10.1016/j.biortech. 2010.05.09.

DOI: 10.1016/j.biortech.2010.05.092

[4] Ch. Q. Wang, H. Wang, Y. N. Liu, Separation of polyethylene terephthalate from municipal waste plastics by froth flotation for recycling industry, Waste Management, Volume 35, (2015), Pages 42-47, ISSN 0956-053X.

DOI: 10.1016/j.wasman.2014.09.025

[5] V.M. Sviatskii, K.B. Sentyakov, Sentyakov B.A., Sviatskii M.A., Forming of canvases from synthetic fibrous materials. Bulletin of TSTU. (2017) Vol. 23. No. 2. - pp.300-306.

[6] V. Sviatskii, B. Sentyakov, M. Sviatskii, Simulation of air flow rate at a point of contact with a stream of melted polymeric material. Acta Tecnología Slovaca, Vol. 2, No. 3, (2016) - pp.1-4.

DOI: 10.22306/atec.v2i3.13

[7] V.M Sviatskii, Structural diagram of the process of production of products from fibrous materials on the basis of secondary synthetic raw materials, Automation, Modern technologies - Moscow: (2015) - № 11. - pp.3-7.

[8] V.M. Sviatskii, B.A. Sentyakov, M.A. Sviatskii, K. B. Sentyakov, S.A. Garayev. Simulation of the process of fabrication canvas with fibrous materials, Vestnik ISTU. - №2.- Izhevsk (2015) - pp.17-20.

DOI: 10.22306/atec.v2i3.13

[9] S.P. Papkov, Theoretical foundations of the production of chemical fibers. M.: Chemistry. (1988) p.272.

[10] P.Yu. Apel, S.N. Dmitriev, Optimization of the shape of the pores of track membranes. Critical technologies. Membranes. (2004) № 3 (23). - pp.32-37.

[11] GM. Gusinsky, E. Kremer, M. Kremer, BV. Mchedlishvili, Determination of the micropores' size of nuclear microfilters with a small diameter // Engineering and Physics Journal. (1979) Т.37. p.119.

DOI: 10.1007/bf00859150

[12] M. Hajduk, L. Koukolová, M. Sukop, L. Varga, L. Dubovicka, Production strategy now. (2012), In: Assembling in Mechanical Engineering, Instrument-making, No. 11 (148) (2012), pp.45-48. ISSN 0202-3350.

[13] Jánoš R, Sukop M, Modular Robots On Multiagent Principe, Global management and economics. No. 1 (2015), pp.64-67. - ISSN 2411-5215.