Kinematic and Dynamic Conditions in Metal Rolling of Porous Materials

Abstract:

Mathematical modeling of plastic deformations in rolling consists in a consequent combination of the general energetic relationship in plasticity and the variation inequality expressed the principle of minimum of entire deformation energy. A real deformation state in a plastic zone beneath rolls and corresponding kinematic and dynamics conditions on the contact surface are considered as a limited one for the consequent approximate deformation states and are found out by the method of approximated approach. Any realization of this method on personal computers requires a rational construction of a kinematic-possible velocity field in the spatial domain on plastic flow. Using the ordinary propositions and a new assumptions the authors have constructed a simple kinematic-possible velocity field in the plastic zone beneath rolls. On the base of the consequent approach in which the general energetic relationship and the variation inequality are interrelated the authors have been able to find out the geometric, kinematic and dynamics characteristics of plastic deformation’s states in metal rolling.

• Periodical: Materials Science Forum (Volume 989)
• Pages: 705-710
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.989.705
• Online since: May 2020
• Authors: Leonid A. Barkov*, Marina N. Samodurova, O.A. Nevraeva
• Keywords: Deformation, Plastic Zone, Rolling, Simulation, Velocity Field

References

[1] L.A. Barkov, M.N. Samodurova, R.A. Zakirov, Y.S. Latfulina, Technology and Mills with Four-Roll Passes for Rolling Small Section Nickel-Base Superalloys, Metallurgist. 60 (2017) 1094-1102.

DOI: 10.1007/s11015-017-0412-1

[2] M.N. Samodurova, L.A. Barkov, Y.S. Latfulina, Deformation in and Efficiency of Rolling in Two- and Multi-Roll Passes, Metallurgist. 60 (2016) 706-712.

DOI: 10.1007/s11015-016-0355-y

[3] L.A. Barkov, M.N. Samodurova, R.A. Zakirov, Y.S. Latfulina, Device for One- and Two-Sided Molding of Refractory Metal Powders Into Electric-Arc Melting Electrode Workpieces, Metallurgist. 64 (2018) 917-921.

DOI: 10.1007/s11015-018-0587-0

[4] L.A. Barkov, M.N. Samodurova, R.A. Zakirov, Y.S. Latfulina, Devices for the Formation of Long-Length Products from Powder Materials, Metallurgist. 61 (2018) 1029-1032.

DOI: 10.1007/s11015-018-0603-4

[5] L.A. Barkov, M.N. Samodurova, Y.S. Latfulina, Dependences of blanks density from pressing force and packing density of molybdenum and tungsten powders, Lecture Notes in Mechanical Engineering. (2019) 1937-1944.

DOI: 10.1007/978-3-319-95630-5_208

[6] L.A. Barkov, M.N. Samodurova, E.A. Trofimov, Computer Simulation of Porous Material Plastic Deformation, International Conference on Industrial Engineering 2017. 206 (2017) 533-539.

DOI: 10.1016/j.proeng.2017.10.512

[7] L.A. Barkov, M.N. Samodurova, D.P. Galkina, Rolling of refractory metals on four-roll passes rolling mills, Lecture Notes in Mechanical Engineering. (2019) 1929-1935.

DOI: 10.1007/978-3-319-95630-5_207

[8] M.N. Samodurova, N.A. Kremsov, L.A Barkov, Y.S. Latfulina, Developing and Studying Methods and Equipment for Rolling Collector Profiles Made of Alloy BrKd1, Metallurgist. 59 (2015) 613-618.

DOI: 10.1007/s11015-015-0147-9

[9] L.A. Barkov, S.A. Mymrin, M.N. Samodurova, N.S. Dzhigun, Y.S. Latfulina, Compressibility of tungsten and molybdenum bars during rotary swaging and rolling, Russian Metallurgy (Metally). 2015 (2015) 360-366.

DOI: 10.1134/s0036029515050031

[10] L.A. Barkov, S.A. Mymrin, M.N. Samodurova, V.A. Ivanov, Simulation of the rolling of porous bars, Russian Metallurgy (Metally). 2014 (2014) 377-381.

DOI: 10.1134/s0036029514050024

[11] L.A. Barkov, S.A. Mymrin, M.N. Samodurova, V.A. Ivanov, Developing a mold and a method for compacting tungsten powders and tungsten-based composite powders, Metallurgist. 58 (2014) 48-57.

DOI: 10.1007/s11015-014-9867-5

[12] L.A. Barkov, Rolling of tungsten bars and semi-products, Proceedings of the 5th International Tungsten Symposium. (1990) 183-201.

[13] Yu.I. Kamenshchikov, L.A. Barkov, A.Yu. Kamenshchikov, Forward slip in process of porous powder billets rolling, Izvestiya AN SSSR: Metally. (1991) 63-65.

[14] L.A. Barkov, Yu.I. Kamenshchikov, S.A. Mymrin, S.A. Leonov, Densification of PM sintered billets during rolling with four-side reduction, Izvestia Akademii nauk SSSR. Metally. (1992) 77-79.

[15] L.A. Barkov, Rolling mill for compacting metal-powder blanks, Soviet Forging and Sheet Metal Stamping Technology (English Translation of Kuznechno-Shtampovochnoe Proizvodstvo). (1988) 95-98.

[16] V.N. Vydrin, L.A. Barkov, Yu.I. Kamenshchikov, Energy method for calculating deformations and forces when rolling in passes, Izvestiya VUZ Chernaya Metallurgiya, 5 (1979) 53-55. 7 (1979) 65-68.

[17] Yu.I. Kamenshchikov, L.A. Barkov, The calculation method of deformations and forces when pressing of porous materials, in Proc. of the 1st International Conference on Mechanics. (1987) 252-255.

[18] L.A. Barkov, Yu.I. Kamenshchikov, G.A. Kuznetsov , Pore material defprmability in four-roll pass rolling, in Proc. of the 3rd International Conference on Computational Plasticity. 1 (1992) 1207-1210.

[19] Yu.I. Kamenshchikov, L.A. Barkov, A.Yu. Kamenshchikov, Kinematic models of rolling when deformation scheme is not uniform, Izvestiya Academy of Science, Metal. 1 (1991) 76-79.

[20] Yu.I. Kamenshchikov, L.A. Barkov, G.A. Kuznetsov, Computer modeling of plastic deformations in rolling of porous materials, in the Technical Programme of International Conference on Computational Engineering Science (ICES'92). (1992) 10.