Texture Investigations of Zircaloy-4 Tubes by Neutron Diffraction

Maja Dlouhá; Stanislav Vratislav; Ladislav Kalvoda

doi:10.4028/www.scientific.net/SSP.105.297

Paper Titles

A New Perspective on the Mathematical Modeling of Highly Nonlinear Anisotropic Plastic Flows in a Heterogeneous Solid
p.271

Correlation of Texture and Plastic Anisotropy in the Al-Mg Alloy AA 5005
p.277

Modeling Texture Evolution during Rolling of Magnesium Alloy AZ31
p.285

Texture Development in Nd-Fe-V and Nd-Fe-B Alloys by Hot Forging in View of Improving Permanent Magnet Properties
p.291

Texture Investigations of Zircaloy-4 Tubes by Neutron Diffraction
p.297

Shear Texture Formation during High-Strain Torsion of Titanium Aluminides
p.303

Microstructure and Texture in Copper Sheets after Reverse and Cross Rolling
p.309

Texture and Microstructure Evolution during Cold Swaging and Recrystallization of Oligocrystalline INCOLOY^® MA 956
p.315

Local and Global Effects in Texture and Microstructure Observed after Channel-Die Compression of Copper Single Crystals and after Cross-Rolling of Copper Sheets
p.321

HomeSolid State PhenomenaSolid State Phenomena Vol. 105Texture Investigations of Zircaloy-4 Tubes by...

Texture Investigations of Zircaloy-4 Tubes by Neutron Diffraction

Abstract:

This article presents the results of texture investigations of Zircaloy-4 tubes. Neutron diffraction and inversion pole figures were used to chracterize the texture of samples. The main interest is given to the analysis of texture changes under different tensile test conditions including tensile force direction, annealing temperature and tensile test temperature. Four different specimens of different orientation to the tube axis were tested.