Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys

Z. Stokłosa; G. Badura; P. Kwapuliński; Józef Rasek; G. Haneczok; Józef Lelątko; Lucjan Pająk

doi:10.4028/www.scientific.net/SSP.130.171

Paper Titles

Characterisation of β Phase in WE54 Magnesium Alloy
p.155

Morphology of Precipitates in Ni-Al-Cr Intermetallic Alloy
p.159

Precipitation of Phases in Al-Mg-Si-Cu Alloy with Sc and Zr Additions during Heat Treatment
p.163

Devitrification and Nano-Crystalline/Amorphous Composite Formation in Ni₆₄Cu₉Fe₈P₁₉ Glassy Alloy at Elevated Temperatures
p.167

Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys
p.171

TEM Investigations of Electron 21 Magnesium Alloy
p.175

Structural Studies of Metallic Powders Fe-Al-X (X= Fe, Ni, Cu, Cr) Type Obtained by the Self-Decomposition Method and Electro-Magneto-Mechanical Grinding
p.181

Mössbauer and XRD Studies on Composite Powder with Phases from Fe-Al System Obtained by Mechanically Activated SHS Mehtod
p.185

Bulk Nanostructured Al-Si-Ni-Mishmetal Alloys Produced by High-Pressure Hot Compaction
p.189

HomeSolid State PhenomenaSolid State Phenomena Vol. 130Influence of Alloying Additions on Enhancement of...

Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys

Abstract:

The crystallization and optimization of magnetic properties effects in FeXSiB (X=Cu, V, Co, Zr, Nb) amorphous alloys were studied by applying X-ray diffraction methods, high resolution transmission electron microscopy (HRTEM), resistometric and magnetic measurements. The temperatures of the first and the second stage of crystallization, the 1h optimization annealing temperature and the Curie temperature were determined for different amorphous alloys. Activation energies of crystallization process were obtained by applying the Kissinger method. The influence of alloy additions on optimization effect and crystallization processes was carefully examined.