Microstructure and Selected Properties of WC-Co-Cr Coatings Deposited by High Velocity Thermal Spray Processes

Abstract:

Article Preview

Selected information about high velocity thermal spraying method were presented in this article. Three generations of thermal spraying processes based on oxygen with propane mixture, liquid fuel with oxygen and propane with air were characterized. A powder of WC-Co-Cr 86-10-4 was used for coatings deposition on a steel substrate. Four coatings were deposited by different thermal spraying systems such as Diamond Jet, JP 5000, Micro HVOF and HVAF.

Info:

Periodical:

Solid State Phenomena (Volume 246)

Edited by:

Agnieszka Szczotok, Agnieszka Szkliniarz and Jacek Mendala

Pages:

117-122

DOI:

10.4028/www.scientific.net/SSP.246.117

Citation:

H. Myalska et al., "Microstructure and Selected Properties of WC-Co-Cr Coatings Deposited by High Velocity Thermal Spray Processes", Solid State Phenomena, Vol. 246, pp. 117-122, 2016

Online since:

February 2016

Export:

Price:

$35.00

* - Corresponding Author

[1] M. Schütze, Corrosion Resistance at Elevated Temperatures in Highly Aggressive Environments, in: D. Shoesmith, G. Cragnolino (Eds. ), Proc. Res. Topical Symp. 2005 Corrosion Resistant Materials for Extreme Conditions, NACE International, Houston, Texas, 2005, p.1.

[2] A. Scrivani, S. Ianelli, R. Groppetti, S. Bertini, O. Lacroix, G. Rizzi, F. Casadei, A contribution to the production and characterization of HVOF coatings for application in the petrochemical field, in: C.C. Berndt, E. F. Lugscheider (Eds. ), Proc. of the 2nd ITS Conference on New Surfaces for a New Millennium, Singapore, May 2001, ASM International, pp.141-148.

DOI: 10.1016/s0043-1648(01)00621-4

[3] P. Wang, Z.M. Wang, J. Zhang, J.Q. Wang, Deposition of HVAF-sprayed Ni-based amorphous metallic coatings, J. Alloy. Compd. 440 (2007) 225-228.

DOI: 10.1016/j.jallcom.2006.09.003

[4] S. Liu, D. Sun, Z. Fan, H. Yu, H. Meng, The influence of HVAF powder feedstock characteristics on the sliding wear behavior of WC-Ni-Cr coatings, Surf. Coat. Tech. 202 (2008) 4893-4900.

DOI: 10.1016/j.surfcoat.2008.03.014

[5] H. Myalska, J. Wieczorek, K. Szymański, G. Moskal, The influence of high velocity thermal spraying methods on top surface topography of WC-Co coatings, Solid State Phenom. 226 (2015) 149-154.

DOI: 10.4028/www.scientific.net/ssp.226.149

[6] M.M. Lima, C. Goday, P.J. Modenesi, J.C. Avelar-Batista, A. Davison, A. Mathews, Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings, Surf. Coat. Tech. 177-178 (2004).

DOI: 10.1016/s0257-8972(03)00917-4

[7] C.B. Ponton, R.D. Rawlings, Vickers indentation fracture toughness test: Part 1. review of literature and formulation of standardised indentation toughness equations, Mater. Sci. Technol. 5 (1989) 865-872.

DOI: 10.1179/026708389790222852

[8] C.B. Ponton, R.D. Rawlings, Vickers indentation fracture toughness test: Part 2. Application and critical evaluation of standardised indentation toughness equations, Mater. Sci. Technol. 5 (1989) 961-976.

DOI: 10.1179/026708389790339574

In order to see related information, you need to Login.