Refractory Core-Shell Powders for Additive Industries

Abstract:

The finished products obtained when the surfaces of powders of refractory materials (diamond, boron nitride, silicon carbide, tungsten carbide, tungsten) were coated with thin films by the method of iodide transport are presented. The developed method enables to obtain powder composite materials of core-shell type that have surface thickness varying in the range from 1 nm to several micrometers. From the powders modified by the films of metals and thier compounds composite materials were developed, their physical and mechanical characteristics were studied. The characteristics turned out to be substantially higher in comparison to materials sintered from the same powders but without coating. The probable fields of use of the composites in question were determined.

• Periodical: Solid State Phenomena (Volume 265)
• Pages: 529-534
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.265.529
• Online since: September 2017
• Authors: Sergey P. Bogdanov*, A.P. Garshin
• Keywords: Additive Industries, Coating, Iodide Transport, Refractory Powders

References

[1] S.P. Bogdanov, Preparation of coatings on powders by the iodide transport method, Glass Physics and Chemistry, 37(2) (2011) 172-178.

DOI: 10.1134/s1087659611020040

[2] S.P. Bogdanov, The iodide transport method of obtaining coatings on powders, Bulletin of the Saint Petersburg State Institute of Technology (Technical University), 16(42) (2012) 24-28.

[3] S.P. Bogdanov, The chemical activity of the coatings obtained by the iodide transport method, Glass Physics and Chemistry, 38 (6) (2012) 750-754.

[4] N.A. Hristyuk, S.P. Bogdanov, M.M. Sychov, Actual methods of preparing of the chromium–containing coatings on steel by means of gas transportation method, Bulletin of the Saint Pete. rsburg State Institute of Technology (Technical University), 29(55) (2015).

DOI: 10.15217/issn1998984-9.2015.29.10

[5] S.P. Bogdanov, N.A. Hristyuk, Uses of iodide transport diffusion for the pack chromizing process of steel, Steel, 1 (2017) 67-72.

[6] R.F. Rolsten. Iodide Metals and Metal Iodides, Wiley & Sons, Inc, New York, (1961).

[7] S.P. Bogdanov, Titanium Carbide Synthesis in the Presence of Iodine, Refractories and Industrial Ceramics, 56 (5) (2016) 551-556.

DOI: 10.1007/s11148-016-9885-x

[8] Y.I. Xiaowei [etc. ], Formation of titanium carbide on graphite via powder immersion reaction assisted coating, Materials Science and Engineering, A 396 (2005) 107-114.

DOI: 10.1016/j.msea.2005.01.011

[9] S.P. Bogdanov, Titanium Nitride Synthesis in the Presence of Iodine, Refractories and Industrial Ceramics, 56(3) (2015) 267-270.

DOI: 10.1007/s11148-015-9828-y

[10] N.V. Novikov Ed., Diamond Based Polycrystalline Materials, Naukova Dumka, Kiev, (1989).

[11] S.P. Bogdanov, Study of sintering polycrystalline and composite materials based in silicon carbide in high-pressure equipment, Refractories and Industrial Ceramics, 56(1) (2015) 66-71.

DOI: 10.1007/s11148-015-9785-5

[12] S.P. Bogdanov, A.P. Garshin, V.A. Ponomarenko, Composite material based on boron nitride micropowder with a coating, Refractories and Industrial Ceramics, 56(6) (2016) 615-620.

DOI: 10.1007/s11148-016-9899-4

[13] V.I. Rumyantsev, Industrial production technology of solid heavy alloys on the basis of submicrocrystalline powders of tungsten and tungsten carbide clad iron subgroup metals, Scientific-technical conference advanced materials and innovative technologies for metal processing and procurement of production ammunition companies, Moscow, (2013).

[14] T.I. Bobkova, B.V. Farmakovskii, S.P. Bogdanov, Creation of Composite Nanostructured Surface-Reinforced Powder Materials Based on Ti/WC and Ti/TiCN Used for Coatings with Enhanced Hardness, Inorganic Materials: Applied Research, 7(6) (2016).

DOI: 10.1134/s2075113316060034