Degradation Behaviour of Nanosilica Enhanced Oil Palm Empty Fruit Bunch Fiber Epoxy Composites

Abstract:

In recent years, studies regarding natural fiber reinforced composites have been increased as they are biodegradable with good mechanical performance therefore can help to overcome the environmental issue. As the natural fibers are easy to obtain, many industries have started to make use of natural fiber composites which are light in weight and possess good mechanical properties. However, the natural fiber composites also possess certain limitations most importantly their high moisture absorption ability which makes them incompatible at degradable environment. The fiber constituents of natural fiber composite may have different type of interactions at different environmental conditions. In addition, the involvement of nanoparticles in the composite may be the solution to overcome the deficiencies. In this research, the degradation behaviour of Oil palm empty fruit bunch (OPEFB) fibers reinforced epoxy composites upon exposure to degradable environmental conditions and the effect of adding nanoparticles have been studied. The tensile tests were conducted before and after the exposure to different environmental conditions including plain water, moist soil, brine solution, and cooking oil. Results shows that the addition of 10wt% of OPEFB fiber to the epoxy composites had improved the mechanical tensile strength up to 15.97% and composites exposed to brine solution have the most prominent sign of degradation in mechanical properties in both composites with and without nanosilica. Nevertheless, the composites with nanosilica have shown up to 24.28% improvement in tensile strength after exposure to different environmental conditions. The improvement were attributed due to filling the voids of the composites with nanosilica and good interfacial adhesion between the nanofiller, fiber, and matrix.

• Periodical: Solid State Phenomena (Volume 305)
• Pages: 28-35
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.305.28
• Online since: June 2020
• Authors: Anslem Wong Tsu An*, Sujan Debnath, Vincent Lee Chieng Chen, Moola Mohan Reddy, Alokesh Pramanik
• Keywords: Composite, Degradation Behavior, Fiber, Nanosilica, Tensile Strength

References

[1] Taj, Saira, Munawar Ali Munawar, and Shafiullah Khan. 2007. Natural fiber-reinforced polymer composites. , Proceedings-Pakistan Academy of Sciences 44, no. 2: 129. doi: 44(2):129-144. (2007).

[2] Khanam, P. Noorunnisa, HPS Abdul Khalil, G. Ramachandra Reddy, and S. Venkata Naidu. 2011. Tensile, flexural and chemical resistance properties of sisal fibre reinforced polymer composites: Effect of fibre surface treatment. , Journal of Polymers and the Environment 19, no. 1: 115-119. doi:10. 1007/s10924-010-0219-7.

DOI: 10.1007/s10924-010-0219-7

[3] Lila, Manish Kumar, Brijendra Singh, B. S. Pabla, and Inderdeep Singh. 2018. Effect of environmental conditioning on natural fiber reinforced epoxy composites. , Materials Today: Proceedings 5, no. 9: 17006-17011. doi:10. 1016/j. matpr. 2018. 04.105.

DOI: 10.1016/j.matpr.2018.04.105

[4] Paul, D. R., and Lioyd M. Robeson. 2008. Polymer nanotechnology: nano composites. , Polymer 49, no. 15: 3187-3204. doi:10. 1016/j. polymer. 2008. 04. 017.

DOI: 10.1016/j.polymer.2008.04.017

[5] Chowdhury, M. N. K., M. D. H. Beg, Maksudur R. Khan, and M. F. Mina. 2013. Modification of oil palm empty fruit bunch fibers by nanoparticle impregnation and alkali treatment. , Cellulose20, no. 3: 1477-1490. doi:10. 1007/s10570-013-9921-7.

DOI: 10.1007/s10570-013-9921-7

[6] Rai, Mahendra, Alka Yadav, and Aniket Gade. 2009. Silver nanoparticles as a new generation of antimicrobials. , Biotechnology advances 27, no. 1: 76-83. doi:10. 1016/j.biotechadv. 2008. 09. 002.

DOI: 10.1016/j.biotechadv.2008.09.002

[7] Bakar, Mimi Azlina Abu, Valliyappan D. Natarajan, Anizah Kalam, and Nor Hayati Kudiran. 2007. Mechanical properties of oil palm fibre reinforced epoxy for building short span bridge. , In Experimental Analysis of Nano and Engineering Materials and Structures, pp.97-98. Springer, Dordrecht. doi:10. 1007/978-1-4020-6239-1_47.

DOI: 10.1007/978-1-4020-6239-1_47

[8] Behniafar, Hossein, and Mohammad Kazem Nazemi. 2017. Effect of amine-functionalized silica nanoparticles on thermal and mechanical behaviors of DGEBA/IPD epoxy networks. , Polymer Bulletin 74, no. 9: 3739-3749. doi:10. 1007/s00289-017-1928-z.

DOI: 10.1007/s00289-017-1928-z

[9] Fan XJ, Lee SWR, Han Q. 2009. Experimental investigations and model study of moisture behaviors in polymeric materials., Microelectron Reliab 49:861–871.

DOI: 10.1016/j.microrel.2009.03.006

[10] Shi H, Liu F, Yang L, Han E. 2008. Characterization of protective performance of epoxy reinforced with nanometer-sized TiO2 and SiO2., Prog Org Coat 62:359–368. doi:10. 1016/j. porgcoat. 2007. 11. 003.

DOI: 10.1016/j.porgcoat.2007.11.003

[11] Bajpai, Pramendra Kumar, Dharmendra Meena, Shrey Vatsa, and Inderdeep Singh. 2013. Tensile behavior of nettle fiber composites exposed to various environments. , Journal of Natural Fibers 10, no. 3: 244-256.

DOI: 10.1080/15440478.2013.791912

[12] Kolybaba, M., L. G. Tabil, S. Panigrahi, W. J. Crerar, T. Powell, and B. Wang. 2006. Biodegradable polymers: past, present, and future. , In ASABE/CSBE North Central Intersectional Meeting, p.1. American Society of Agricultural and Biological Engineers. doi:10. 13031/2013. 41300.

DOI: 10.13031/2013.41300

[13] Fakhrul, Takian, and M. A. Islam. 2013. Degradation behavior of natural fiber reinforced polymer matrix composites. , Procedia Engineering 56: 795-800. doi:10. 1016/j. proeng. 2013. 03. 198. 10.1007/s11595-017-1744-1.

DOI: 10.1016/j.proeng.2013.03.198

[14] Zhao H, Li RKY. 2008. Effect of water absorption on the mechanical and dielectric properties of nano-alumina filled epoxy nanocomposites., Compos Part Appl Sci Manuf 39:602–611. doi:10. 1016/j. compositesa. 2007. 07. 006.

DOI: 10.1016/j.compositesa.2007.07.006

[15] Boulos, Lina, M. Reza Foruzanmehr, Arezki Tagnit-Hamou, Saïd Elkoun, and Mathieu Robert. 2017. Wetting analysis and surface characterization of flax fibers modified with zirconia by sol-gel method. , Surface and Coatings Technology 313: 407-416. doi. org/10. 1016/j. surfcoat. 2017. 02.008.

DOI: 10.1016/j.surfcoat.2017.02.008

[16] Bayart, Marie, Florent Gauvin, M. Reza Foruzanmehr, Saïd Elkoun, and Mathieu Robert. 2017. Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers. , Fibers and Polymers 18, no. 7: 1288-1295. doi.org/10. 1007/s12221-017-7123-x.

DOI: 10.1007/s12221-017-7123-x

[17] Karmaker, A. C. 1997. Effect of water absorption on dimensional stability and impact energy of jute fibre reinforced polypropylene. , Journal of materials science letters 16, no.l6: 462-464.doi.org/10. 1023/A:1018508209022.