Mechanism of Protective Action of Inhibitors Based on Quaternary Ammonium Compounds

Abstract:

Currently, inhibitory protection is one of the most effective and common methods of protecting the inner surface of oil field equipment from corrosion. The work explores the mechanism of protective action of new inhibitors based on quaternary ammonium compounds and assesses feasibility of their practical application in oil fields of OJSC Surgutneftegas. Studies were conducted on samples made of pipe steels A 568M, A 516-55 and 13CrV (rus 13ХФА) in a model produced water solution. Three corrosion inhibitors were tested. Parameters of the mechanism of protective action of reagents were determined by potentiodynamic analysis.

• Periodical: Solid State Phenomena (Volume 316)
• Pages: 880-884
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.316.880
• Online since: April 2021
• Authors: A.S. Tyusenkov*, O.A. Nasibullina
• Keywords: Corrosion, Corrosion Rate, Electrochemical Tests, Formation Water, Inhibitor, Pipeline, Polarization Curves, Potentiostat, Process Fluid, Steel

References

[1] I.G. Abdullin, A.G. Gareev, Corrosion fatigue durability of pipe steel in carbonate-bicarbonate media, Fiziko-Khimicheskaya Mekhanika Materialov. 29 № 5 (1993) 97-98.

DOI: 10.1007/bf00558780

[2] I.G. Abdullin, A.G. Gareev, Corrosion-fatigue durability of pipe steel in carbonate-bicarbonate medium, Materials Science. 29 № 5 (1994) 539-541.

DOI: 10.1007/bf00558780

[3] R.G. Rizvanov, R.G. Abdeev, N.L. Matveev, R.G. Ryskulov, A.I. Shenknekht, A.F. Insafutdinov, Effect of the geometry of the shell/elliptical-bottom contact zone on the stress state of pressure vessels, Chemical and Petroleum Engineering. 36 (2000) 3.

DOI: 10.1007/bf02463460

[4] I.G. Ibragimov, R.G. Vil'danov, Measuring stresses in welded joints by the remagnetisation loss method, Welding International. 21 № 2 (2007) 139-141.

DOI: 10.1533/wint.2007.3770

[5] Е.М. Gutman, I.G. Abdullin, D.E. Bugai, Kinetics of microdistortion changes of the crystal lattice and electrochemical behavior of austenitic steel during low-cycle corrosion fatigue, Protection of Metals and Physical Chem. of Surfaces. 18 № 3 (1982) 416.

[6] 8. O.A Nasibullina, A.G Gareev and R.G. Rizvanov, Solid State Phenomena. 284 (2018) 1302-6.

[7] O.R. Latypov Reduction of Salt Deposits on the Surface of Oilfield Equipment by Management of Electrochemical Parameters of the Medium, Chem. and Petroleum Eng. 51 № 7 (2015) 522-525.

DOI: 10.1007/s10556-015-0079-z

[8] Latypova D R, Latypov O R and Bugai D E Influence of electrode potential on the depth of pitting corrosion in the surface structures of placed steel, Nanotehnologii v stroitel'stve = Nanotechnologies in Construction. 10 №3 (2018) 167-78.

DOI: 10.15828/2075-8545-2018-10-3-167-178

[9] O.A. Nasibullina and A.G. Gareev, Materials Science Forum. 946 (2019) 381-6.

[10] A.B Laptev and D.E Bugay, Fighting against corrosion in oil and gas complex of Russia: problems and the ways of their solving European Corrosion Congress (EUROCORR-2010) (Moscow: Curran Associates, Inc.). (2010) 191.

[11] D.V. Karetnikov, R.G. Rizvanov, A.M. Fairushin, K.S. Kolokhov, Increasing the reliability of oil and gas equipment working in the conditions of steep temperature gradients, Welding International. 27 № 7 (2013) 557-560.

DOI: 10.1080/09507116.2012.715949

[12] R.B. Tukaeva, V.G. Afanasenko, P.A. Kulakov, Development of a technique of the automated construction of 3D models of standard mass transfer trays, MATEC Web of Conferences. 224 (2018) 04027.

DOI: 10.1051/matecconf/201822404027

[13] P.A. Kulakov, A.V. Rubtsov, V.G. Afanasenko, V. Gracheva, Technical condition parameters affecting the period of safe operation of technological pipelines, MATEC Web of Conferences. 224 (2018) 02090.

DOI: 10.1051/matecconf/201822402090

[14] A.S. Tyusenkov and O.A. Nasibullina, IOP Conf. Ser.: Mater. Sci. Eng. 687 (2019) 066021.

DOI: 10.1088/1757-899x/687/6/066021

[15] A.S. Tyusenkov and O.A. Nasibullina, IOP Conf. Ser.: Mater. Sci. Eng. 687 (2019) 066016.

DOI: 10.1088/1757-899x/687/6/066016

[16] P.A. Kulakov, A.A. Kutlubulatov, V.G. Afanasenko, Forecasting of the hydraulic fracturing efficiency as components of its design optimization, SOCAR Proceedings. 2 (2018) 41-48.

DOI: 10.5510/ogp20180200349

[17] V.G. Afanasenko, I.R. Kuzeev, Y.S. Kovshova, P.A. Kulakov, Emulsification intensification under simultaneous impact of original and reflected ultrasonic vibrations, Bulletin of the Tomsk Polytechnic University, Geo Assets Engineering. 329(2018) 44-51.

[18] P.A. Kulakov, D.D. Galyautdinov, V.G. Afanasenko, Problem of Calculation of Reliability of Hierarchical Complex Technical Systems, Lecture Notes in Mechanical Engineering. (2020) 753-763.

DOI: 10.1007/978-3-030-22041-9_81

[19] O.A. Nasibullina and A.S. Tyusenkov, IOP Conf. Ser.: Mater. Sci. Eng. 537 (2019) 022018.

DOI: 10.1088/1757-899x/537/2/022018

[20] O.A. Nasibullina and A.S. Tyusenkov, IOP Conf. Ser.: Mater. Sci. Eng. 537 (2019) 022023.

DOI: 10.1088/1757-899x/537/2/022023

[21] P.A. Kulakov, D.D. Bogdanova, V.G. Afanasenko, The Task of Definition of Nonconformity of the Emergency Response plan Level for the Emergency Level, IOP Conference Series: Earth and Environmental Science. 272(2019) 032072.

DOI: 10.1088/1755-1315/272/3/032072

[22] P.A. Kulakov, V.G. Afanasenko, Influence of Minimally Permissible Quantity of Source Materials on the Probability of Failure of a Pump−Tank System, Chemical and Petroleum Engineering. 54 (2019) 681-686.

DOI: 10.1007/s10556-019-00533-9

[23] A.S. Tyusenkov, Chemical resistance of steel 13CrV (rus 13ХФА), Steel. 2 (2016) 53-57.

[24] G.R. Khaydarova, A.S. Tyusenkov, D.E. Bugai, A.A. Islamutdinova, G.M. Sidorov, Development and testing of corrosion inhibitors properties based on quaternary ammonium compounds, Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Khimiya i Khimicheskaya Tekhnologiya. 61 №7 (2018) 130-136.

DOI: 10.6060/ivkkt.20186107.5710