Books by Keyword: Rapid Solidification

Books

Edited by: Prof. Wilfried Kurz, Dr. David J. Fisher and Prof. Michel Rappaz
Online since: August 2023
Description:

Since the 4th 1998 edition, there have been numerous crucial advances to the modelling and the basic understanding of solidification phenomena, and with its linking to experimental results. These topics have been incorporated into this 5th Fully Revised Edition, as well as a new final chapter on microstructure selection which explains how to combine the concepts of the preceding chapters for modelling real microstructures, in complex processes such as additive manufacturing.

This new 5th edition is of high interest to undergraduate and graduate levels and professionals.
With its numerous new topics - also borne out by the new authorship - students and teachers, scientists and engineers will greatly benefit from this new book. The topics are presented in the same praised manner as in previous editions, readable at three levels:
- an initial feel for the subject is obtained by consulting the figures and their detailed captions;
- a deeper understanding of the underlying physics is found by working through the main text;
- 15 appendices offer a detailed analysis of the various theories, by providing detailed derivations of the relevant equations.
Particularly Novel: the final chapter 8 on microstructure-selection explains how to combine the concepts of the preceding chapters to model the real microstructures formed during complex processes such as additive manufacturing, and the new detailed phase-field appendix which opens the door to the accurate computer-modelling of growth-forms.
This edition goes with a companion Solutions Manual offering model solutions to 133 problems (exercises).

Authors: Prof. Wilfried Kurz, Dr. David J. Fisher and Prof. Michel Rappaz
Online since: August 2023
Description:

Solutions Manual is a companion book to the Fundamentals of Solidification 5th edition offering model solutions to 133 problems (exercises). The 5th edition of Fundamentals of Solidification (2023) includes new contributions on phase-field modelling and a new 8th Chapter on microstructure selection. It explains how to combine the concepts of the seven preceding chapters of the book so as to model the real microstructures that form during complex processes such as additive manufacturing … which are still a challenge or are out of reach of numerical simulation. This Solutions Manual, together with the 5th edition of the main text, will offer its readership a good start in the field, and prepare them for tackling more involved treatments of solidification.

The main book Fundamentals of Solidification 5th fully revised edition is available separately.
Authors: Prof. Wilfried Kurz, Dr. David J. Fisher and Prof. Michel Rappaz
Online since: February 2023
Description:

Since the 4th 1998 edition, there have been numerous crucial advances to the modelling and the basic understanding of solidification phenomena, and with its linking to experimental results. These topics have been incorporated into this 5th Fully Revised Edition, as well as a new final chapter on microstructure selection which explains how to combine the concepts of the preceding chapters for modelling real microstructures, in complex processes such as additive manufacturing.

This new 5th edition is of high interest to undergraduate and graduate levels and professionals. For orders you are welcome to download the Order Form.
With its numerous new topics - also borne out by the new authorship - students and teachers, scientists and engineers will greatly benefit from this new book. The topics are presented in the same praised manner as in previous editions, readable at three levels:
- an initial feel for the subject is obtained by consulting the figures and their detailed captions;
- a deeper understanding of the underlying physics is found by working through the main text;
- 15 appendices offer a detailed analysis of the various theories, by providing detailed derivations of the relevant equations.
Particularly Novel: the final chapter 8 on microstructure-selection explains how to combine the concepts of the preceding chapters to model the real microstructures formed during complex processes such as additive manufacturing, and the new detailed phase-field appendix which opens the door to the accurate computer-modelling of growth-forms.
This book has a companion book Solutions Manual which is available separately.

Edited by: A. Roósz and K. Tomolya
Online since: May 2014
Description: The results of many foreign and Hungarian researchers presented at the 6th International Conference on Solidification and Gravity, in Miskolc-Lillafüred, on September 2-5, 2013 have been collected in this volume. This conference series is aimed to attract all those having interest in the investigation and simulation of different types of solidification processes and both micro- and macro-gravity effects. Within the framework of the conference a MICAST meeting (Microstructure Formation in Casting of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions) was organized on September 5-6, 2013. The 2013 conference was a memorial one for Professor Hans Eckart Exner and Professor Erik György Fuchs who had died in the period between the previous (2008) and the last (2013) conference.
Edited by: Danuta Stróż and Krystian Prusik
Online since: March 2012
Description: These are the proceedings of the XIV International Conference on Electron Microscopy (EM2011) held in Wisła, Poland from the 26 to 30th June 2011. The goal of the conference was to provide a forum where researchers from many different countries could exchange their latest advances in the field of structural studies, regarding the use of electron microscopic techniques as applied to various materials. Plenary and invited lectures offered overviews of exciting new developments which highlighted the applications of new electron microscopic techniques in physics, chemistry, materials science and in life and earth sciences.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The papers cover topics such as electron, holography, tomography, HREM, STEM, EBSD, ED and precession techniques - as well as their application to materials science and related disciplines.
Edited by: Ran Chen
Online since: July 2011
Description: These are the proceedings of the 2011 International Conference on the Frontier of Nanoscience and Technology (ICFNST 2011), held in Kunming, China, on September 28-29th, 2011. The aim was to provide a platform from which researchers, engineers and academics, as well as industrial professionals, from all over the world could present their research results and development activities in the fields of Nanoscience and Technology. The work thus presents an eminently up-to-date survey of the subject.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Edited by: Maria Richert
Online since: February 2011
Description: Engineering materials, and surface engineering with the emphasis placed on novel materials with unusual properties, are the main subjects of this special collection. It gathers together the latest know-how and achievements of scientists working in the fields of functional materials, nano- and ultrafine-grained materials and coatings produced using various methods; thus rendering it an invaluable guide to the subject.
Edited by: Dílson S. dos Santos
Online since: February 2008
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection comprises 25 peer-reviewed contributions providing up-to-date knowledge in the field of “Metastable and Nanostructured Materials”.
Edited by: W.J. Poole, M.A. Wells and D.J. Lloyd
Online since: July 2006
Description: The world production of primary and recycled aluminum continues to increase and, over the past twenty years, has risen from ~15 Mt/y in 1985 to ~32 Mt/y in 2005. The main consumers are transportation, beverage and other packaging, and building construction. The global primary aluminum production has been growing by about 2-3% per year. However, growth rates over the last decade have been much higher. In particular, during the past five years, China has played a critical role in aluminum production and has gone through a dramatic period of growth.
Edited by: Y. Kojima, T. Aizawa, K. Higashi, S. Kamado
Online since: March 2003
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
Magnesium alloys are among the most promising ecomaterials for various high-tech applications in the 21st Century. This 2-volume set comprises the proceedings of the 2nd International Conference on Platform Science and Technology for Advanced Magnesium Alloys (PSTAM 2003). The papers cover a wide spread of perspectives on the academic fundamentals, and industrial applications, of magnesium alloys.
Showing 1 to 10 of 18 Books