Books by Keyword: Rheology

Books

Edited by: Annalisa Pola, Marialaura Tocci and Ahmed Rassili
Online since: September 2023
Description: The present edition of the International Conference on Semi-Solid Processing of Alloys and Composites (S2P) is the 17th of a series of conferences on semisolid processing of metals and composites started in 1990 in France. The topics of interest are many: development of innovative materials and composites, microstructural and mechanical characterization, semi-solid material preparation and related technologies, modelling and simulation, industrial applications, interactions between semisolid processing and additive manufacturing. As known, semisolid processing is a foundry process in which the mold is filled with partially solid metal, instead of liquid metal. This allows to avoid a turbulent flow of the liquid metal, leading to lower porosities due to gas entrapment, while ensuring optimum filling of the die, even when thin walls are present. Also, shrinkage porosities are reduced since the alloy is partially solid during the mold filling. These features, typical only of semisolid processing, are gaining new interest, for instance, for the production of heat sinks with complex geometries and thin walls as the one used in electric vehicles. In addition, mechanical properties are improved, as well as the corrosion and wear resistance, due to the peculiar globular microstructure, resulting in the possibility to manufacture high-performance structural components. At the same time, the metal fills the die at a lower temperature than in conventional foundry process, resulting in a prolonged lifetime of the die. Last but not least, the surface finish of these castings is extremely good. The conference has been organized by the Italian Association of Metallurgy (AIM) and the University of Brescia (Italy).
Edited by: Jiehua Li and Ahmed Rassili
Online since: January 2022
Description:

The volume contains proceedings of the 16th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2021, September 28-30, 2021, Leoben, Austria). The presented collection is dedicated to the study of the technologies of semi-solid processing of alloys and composites.

Edited by: Michael Modigell
Online since: September 2014
Description: Collection of selected, peer reviewed papers from the 13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014), September 15-17, 2014, Muscat, Sultanate of Oman.
The 68 papers are grouped as follows:
Chapter 1: Material Development and Characterisation,
Chapter 2: Rheology, Modelling and Simulation,
Chapter 3: Process Development,
Chapter 4: Industrial Application
Edited by: Janis Zicans and Remo Merijs Meri
Online since: June 2013
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The issue summarizes 22 selected papers of the XII international conference Baltic Polymer Symposium 2012, held in Liepaja, Latvia, from 19-22 of September, 2012. Since 2001 the event is annually organized by technical universities of the three Baltic States. Baltic Polymer Symposium 2012 in Liepāja was visited by participants not only from the three Baltic States, but also by participants from Taiwan, Germany, Finland, United Kingdom, Poland, Ukraine and Russia. The scope of the proceedings comprises all aspects of modern polymers science: synthesis, processing, recycling, composites, nanotechnologies etc.
Edited by: Heinrich Möller and Dr. Gonasagren Govender
Online since: October 2012
Description: These proceedings of the 12th International Conference on Semi-Solid Processing of Alloys and Composites contain the papers which were presented at the conference, held in Cape Town (South Africa) between the 8th and 11th October 2012. The aim of these international conferences is to provide a forum where the leading researchers, engineers and industrialists in this field can gather in order to share their work and knowledge, and hold lively discussions concerning current fundamental issues in semi-solid metal processing.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The contents are divided into 5 distinct sections: Microstructure and Properties; Process Development; Modeling, Simulation and Rheology; Materials Development and Alloy Design and Industrial Applications.
Edited by: Dr. Sooraj Hussain Nandyala
Online since: February 2012
Description: This volume of the "Journal of Biomimetics, Biomaterials and Biomedical Engineering" covers topical issue of biomimetic approach to the development of modern means of a wide range of industrial applications, the new solutions in the field of biomedical engineering and of pharmacological practice and also illuminates the results of the latest solutions in the field of development of biomaterials and their application.
Edited by: M. Marcos, J. Salguero and A. Pastor
Online since: February 2012
Description: This book describes the most recent Advances in Manufacturing Systems presented at the 4th Manufacturing Engineering Society International Conference (MESIC2011), which was held during September 2011 in Cadiz, Spain. Flexible, Intelligent and Emergent Manufacturing Systems, Quality, Quality Control and Quality Management, Production Engineering and Planning are, together with others, the topics which can be found herein. The book is therefore essential reading matter for manufacturing engineers working in the fields mentioned.
Edited by: M. S. J. Hashmi, B. S. Yilbas and S. Naher
Online since: December 2009
Description: Advanced Materials and Processing are important areas of research in Engineering Science and Technology, and require a critical focus on bridging the gap between researchers and engineers. Advanced materials and processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools to create technologies to handle the rapidly expanding range of materials and manufacturing processes. The Advances in Materials and Processing Technologies conference series creates a stimulating environment for the research collaboration of scholars at the local, national and international levels, contributes to the collective development of a knowledge-based society and economy.
Edited by: G. Hirt, A. Rassili, A. Bührig-Polaczek
Online since: July 2008
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special volume is dedicated to the science and technology of the semi-solid processing of metals. Since the recognition of the possibility of manipulating metals in the semi-solid state, during the seventies, this fascinating technology has experienced dynamic development  and has led to a whole family of new production processes, new equipment and industrial applications. In order to exploit fully the technical and economic potential of these new ideas, it is important to achieve a better understanding of the microstructural development and flow behavior in order to improve material and process modelling as well as process control.
Authors: Patrick Wu
Online since: May 1998
Description: Although the last Ice Age ended about ten thousand years ago, its effects are still influencing human activities today - for example: coastal engineering, siting of nuclear waste depositories, intraplate earthquake mitigation, inaccuracy of a global positioning due to changes in the Geodetic Reference Frame, etc.
The recognition of Ice Ages and glacial isostasy led to the first scientific revolution in earth science. During the last few decades, studies of the Dynamics of the Ice Age Earth have brought together various disciplines - including geomorphology, geodynamics, rock and ice rheology, geodesy, glaciology, oceanography, climatology, astronomy, engineering and archeology.Recent interest in the subject has surged forward due to new advances in space-age geodetic techniques and new developments in modeling methods.
Showing 1 to 10 of 12 Books