Books by Keyword: Ti6Al4V

Books

Edited by: R. Zitoune, V. Krishnaraj and J. Paulo Davim
Online since: July 2013
Description: Volume is indexed by Thomson Reuters BCI (WoS).
The literature detailing the effects of varying operating parameters on tool life when machining Titanium alloy is comprehensive, however, relatively little of this data refers to their effects on machined workpiece surface integrity particularly, residual stress generation and distortion created. Greater knowledge of the effects of operating parameters on surface integrity is critical to the acceptance of new environment, cutting path and cutting sequence strategies on machining of Ti6Al4V aerospace alloys to increase the functional requirements and fatigue life of the milled thin components. In this book four chapters have been included to address the above reported issues.
Edited by: Yue Li
Online since: June 2013
Description:

Collection of selected, peer reviewed papers from the 2013 Spring International Conference on Material Sciences and Technology (MST-S), May 31- June 2, 2013, Wuhan, China.
The 57 papers are grouped as follows:
Chapter 1: Chemical Engineering and Technologies;
Chapter 2: Materials Science and Technologies;
Chapter 3: Nanomaterials and Technologies;
Chapter 4: Polymer Materials and Technologies;
Chapter 5: Modelling, Numerical Simulation and Analysis in Material Engineering.

Edited by: Ricardo Alves de Sousa and Robertt Valente
Online since: June 2013
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The collection of 282 peer reviewed papers aims to promote the interest for all types of materials and all topics connected to Material Forming.
The papers are grouped as follows:
Chapter 1: Formability of Metallic Materials
Chapter 2: Forging and Rolling;
Chapter 3: Composites Forming Processes;
Chapter 4: Semi-Solid Processes;
Chapter 5: Light Weight Design and Energy Efficiency in Metal Forming;
Chapter 6: New and Advanced Numerical Strategies for Material Forming;
Chapter 7: Extrusion and Drawing;
Chapter 8: Friction and Wear in Material Processing;
Chapter 9: Nano-Structured Materials and Microforming;
Chapter 10: Inverse Analysis Optimization and Stochastic Approaches;
Chapter 11: Innovative Joining by Forming Technologies;
Chapter 12: Multiscale & Continuum Constitutive Modelling;
Chapter 13: Incremental and Sheet Metal Forming;
Chapter 14: Sheet-Bulk-Metal Forming;
Chapter 15: Heat Transfer Modelling;
Chapter 16: Structures, Properties and Processing of Polymers;
Chapter 17: Non-Conventional Processes;
Chapter 18: Machining and Cutting;
Chapter 19: Integrated Design, Modelling and Reliability Assessment in Forming (I-DMR);
Chapter 20: Finite Element Technology and Multi-Scale Methods for Composites, Metallic Sheets and Coating Models;
Chapter 21: Intelligent Computation in Forming Processes.
Edited by: Chuanzhen Huang, Hongtao Zhu, Jun Wang and Xiaoping Li
Online since: April 2012
Description: This collection of selected peer-reviewed papers includes contributions from all over the world. The topics covered include new developments and applications in subtractive processes including advanced and non-traditional processes and abrasive machining, micro/nano-fabrication, material forming, and new techniques for the processing of materials and understanding the underlying principles of materials performance enhancement. This volume will be a valuable reference source for researchers in the materials processing field who wish to understand further the underlying mechanisms and this create new and practical technologies, systems and processes. It should also be particularly useful to practising engineers in materials processing who are responsible for providing efficient and effective operations.
Edited by: Liu Guiping
Online since: September 2011
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings contain the fully refereed papers which were presented at the 2nd International Conference on Materials and Manufacturing Technology (ICMMT 2011) held during July 8-10, 2011 in Xiamen, China. The main goal of the event was to provide an international scientific forum for the exchange of new ideas in a number of fields, and to facilitate in-depth discussions with peers all over the world. Core areas of materials and manufacturing technology, as well as multidisciplinary, interdisciplinary and future applications are covered; thus providing a timely guide to the entire field.
Edited by: Linli Xu, Wenya Tian and Elwin Mao
Online since: July 2011
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This work, with its 265 peer-reviewed papers, aims to address the hottest issues in materials and mechanics. It covers a wide range of topics in those areas; including materials science, mechanical engineering and materials, industrial applications of materials and mechanics, etc.: a useful and timely guide to the subject matter.
Edited by: M.S.J. Hashmi, S. Mridha and S. Naher
Online since: June 2011
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
Advanced Materials and Processing are important areas of research in Engineering Science and Technology, which have to focus on bridging the critical gap between researchers and engineers in order to shape the new world. Advanced Materials and Processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools, in order to create technologies for a rapidly expanding range of materials and manufacturing processes. A large proportion of the present papers addressed current scientific research and provided solutions to industrial problems; thereby creating an environment of mutual interest to industry and academia. The papers are grouped into 10 chapters: 1. Forming Processes, 2. Casting, Joining and Related Processes, 3. Materials, 4. Materials Removal Processes, 5. High Energy Beam Removal Process, 6. Precision Engineering and Nano-Technology, 7. Surface Engineering, 8. Computer-Aided Engineering, 9. Green Manufacturing and Management, 10. Others. This comprehensive coverage will be much appreciated by readers.
Edited by: Jun Wang,Philip Mathew, Xiaoping Li, Chuanzhen Huang and Hongtao Zhu
Online since: June 2010
Description: Materials processing is an important and essential step in the production of useful products, and is one of the major wealth-generating activities. With the increasing demand for the production of high precision, high integrity and high density devices and systems in modern life, materials processing has become more important than ever before. Following on from the previous eight publications in the series, “Asia-Pacific Conference on Materials Processing”, this volume presents the latest developments in this field, and a new understanding of the underlying mechanisms.
Edited by: T. Chandra, N. Wanderka, W. Reimers , M. Ionescu
Online since: January 2010
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This proceedings supplement contains further selected papers from the 6th International Conference on Processing and Manufacturing of Advanced Materials – THERMEC’2009, held during the period, August 25-29, 2006, in Berlin , Germany under the co-sponsorship of The Minerals, Metals & Materials Society ( TMS) ,USA.
Showing 1 to 9 of 9 Books