Lower Distortion in Trajectory Planning for a Rigid-Flexible Manipulator Based on PSO Algorithm

Abstract:

This paper presents a novel trajectory planning for a multilink rigid-flexible manipulator. An original trajectory is given according to the site condition and requirement of motion, and desired trajectory is determined by using an optimization. To satisfy the requirement of motion with restrictions, the desired trajectory cannot significantly deviate from the original trajectory. Consequently, the lower distortion in trajectory planning should be considered in optimization algorithm. Two different formulations of trajectory are introduced in two optimization algorithms to compare the distortion degree. Finally, the calculation samples are addressed by using specific site conditions and requirements of motion to verify the validity of proposal.

• Periodical: Applied Mechanics and Materials (Volumes 300-301)
• Pages: 458-463
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.300-301.458
• Online since: February 2013
• Authors: Hai Bin Yin, Ni Cong Jiang, Jin Li Xu, Feng Yun Huang
• Keywords: Flexible Manipulator, Lower Distortion, Optimization, Particle Swarm Optimization (PSO), Trajectory Planning

References

[1] Yin, H., Kobayashi, Y., Hoshino Y. and Emaru T., 2010, Decomposed Dynamic Control for Flexible Manipulator in Consideration of Nonlinearity –Rigid Dynamic Control–, Proceedings IEEE/SICE International Symposium on System Integration, Sendai, 359-364.

DOI: 10.1109/sii.2010.5708352

[2] Benosman, M., Le Vey, G., Lanari, L. and De Luca, A., Rest-to-Rest Motion for Planar Multi-link Flexible Manipulator Through Backward Recursion, Trans. ASME, Journal of Dynamic System, Measurement, and Control, Vol. 126 (2004), pp.115-123.

DOI: 10.1115/1.1649976

[3] Abe, A., 2009, Trajectory planning for residual vibration suppression of a two-link rigid-flexible manipulator considering large deformation, Mechanism and Machine Theory, 44, 1627-1639.

DOI: 10.1016/j.mechmachtheory.2009.01.009

[4] Yin, H., Kobayashi, Y., Hoshino, Y. and Emaru, T., 2011, Modeling and Vibration Analysis of Flexible Robot Arm under Fast Motion in Consideration of Nonlinearity, Journal of System Design and Dynamics 5, 909-924.

DOI: 10.1299/jsdd.5.909

[5] Reynolds, M., Meckl, P., The Application of Command Shaping to the Tracking Problem, Trans. ASME, Journal of Dynamic System, Measurement, and Control, Vol. 130 (2008), pp.1-12.

DOI: 10.1115/1.2907379

[6] Singer, N. C. and Seering, W. P., Preshaping command inputs to reduce system vibration, Trans. ASME, Journal of Dynamics System, Measurement and control, Vol. 112 (1990), pp.76-82.

DOI: 10.1115/1.2894142

[7] Shan, J., Liu, H. and Sun, D., Modified input shaping for a rotating single-link flexible manipulator, Journal of Sound and Vibration, Vol. 285 (2005), pp.187-207.

DOI: 10.1016/j.jsv.2004.08.035

[8] Yin, H., Kobayashi, Y., Hoshino Y. and Emaru T., 2011a, Decomposed Dynamic Control for Flexible Manipulator in Consideration of Nonlinearity –Flexible Dynamic Control–, Journal of System Design and Dynamics 5, 219-230.

DOI: 10.1299/jsdd.5.219

[9] Park, K. and Park, Y., Fourier-based optimal design of a flexible manipulator path to reduce residual vibration of the endpoint, Robotica, Vol. 11 (1993), pp.267-272.

DOI: 10.1017/s0263574700016131

[10] Muňoz, V. F., Garcia-Cerezo, A. and Cruz, A., Mobile robots trajectory planning approach under motion restrictions, Integrated Computer-Aided Engineering, Vol. 6 (1999), pp.331-347.

DOI: 10.3233/ica-1999-6406

[11] Chettibi, T., Synthesis of dynamic motions for robotic manipulators with geometric path constraints, Mechatronics, Vol. 16 (2006), pp.547-563.

DOI: 10.1016/j.mechatronics.2006.03.012

[12] C.S. Lin, P.R. Chang, J.Y.S. Luh, Formulation and optimization of cubic polynomial joint trajectories for industrial robots, IEEE Transactions on Automatic Control 28 (12) (1983) 1066–1074.

DOI: 10.1109/tac.1983.1103181