Study Changes in Mechanical Properties of Stainless Steels ELC X04Cr14Ni12TiN under the Surface Finish when Drilling

Jozef Jurko; Anton Panda; Marcel Behún

doi:10.4028/www.scientific.net/AMM.378.150

Paper Titles

Effect of Plasma-Induced Ozone Treatment on the Colour Yield of Textile Fabric
p.131

Probabilistic Lifetime Assessment of Prestressed Concrete Structures Exposed to Chloride Environment
p.135

Fatigue Crack Growth of Cold Worked 304L Stainless Steel in Gaseous Hydrogen
p.140

Paraffin Wax Powder Production by Ultrasonic Atomization
p.145

Study Changes in Mechanical Properties of Stainless Steels ELC X04Cr14Ni12TiN under the Surface Finish when Drilling
p.150

Effect of Machinability of Stainless Steels for Increasing of Productivity Production
p.154

Dynamic Analysis of 2.5D C/C Composites Finger Seal
p.159

Carbon Nanotubes: Good Candidate for VLSI Interconnects
p.165

Heat Transfer Improvement between Copper Film and Ceramic Substrate by Thermal Treatment
p.172

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 378Study Changes in Mechanical Properties of...

Study Changes in Mechanical Properties of Stainless Steels ELC X04Cr14Ni12TiN under the Surface Finish when Drilling

Abstract:

The basic hypothesis of this article focuses on the study changes in mechanical properties of stainless steels ELC X04Cr14Ni12TiN under surface finish when drilling. The problem of drilling holes with diameter D=2 to 6 mm resides in the fact that 30 to 35% of these holes do not comply with prescribed requested requirements1. This article presents the results of experiments focusing on the study of the damage process in helical drills with diameter d=3.0 mm when drilling into austenitic stainless steel ELC X04Cr14Ni12TiN. This study also includes an analysis of accompanying phenomena in the cutting zone by measuring some selected parameters. Experimental results were verified in the production of holes in products for the computers.

You might also be interested in these eBooks

Applied Mechanics, Materials and Manufacturing

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 378)

Pages:

150-153

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.378.150

Citation:

Cite this paper

Online since:

August 2013

Authors:

Jozef Jurko, Anton Panda, Marcel Behún

Keywords:

Drilling, Extra Low Carbon Steel, Hardening, Machined Surface, Stainless Steel (SS)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] T. Fujiwara, T. Kato, S. Abeyama and S. Nakamura, Effects of Free-Machining Additives on Machinability of the 18Cr-2Mo Stainless Steel. Proceedings of the International Symposium on Influence of Metallurgy on Machinability of Steel, 26. -28. September, Tokyo, pp.231-240, (1977).

Google Scholar

[2] H. Chandrasekaran and J. Johansson: Annals of the CIRP 43, 1, pp.101-105, (1994).

Google Scholar

[3] J. Jurko and A. Panda: Advanced Materials Research. Vol. 314-316, pp.995-998, ISSN 1022-6680, (2011).

Google Scholar

[4] J. Jurko, A. Panda and M. Behún: Applied Mechanics and Materials. Vol. 224, pp.204-207, ISSN 1660-9336, (2012).

Google Scholar

[5] J. Jurko, A. Panda and M. Behún: Applied Mechanics and Materials. Vol. 224, pp.142-145, ISSN 1660-9336, (2012).

Google Scholar

[6] J. Jurko, A. Panda, M. Behún, A. Berdis, J. Gecák, M. Gecík and P. Orendáč: Applied Mechanics and Materials, Vol. 217-219, pp.2202-2205, ISSN 1660-9336, (2012).

DOI: 10.4028/www.scientific.net/amm.217-219.2202

Google Scholar

[7] J. Jurko and A. Panda: Applied Mechanics and Materials, Vol. 229-231, pp.415-418, ISSN 1660-9336, (2012).

Google Scholar