Microstructures and Thermal Stabilities of High Silicon Aluminum Alloys Prepared by Spray Deposition

Feng Huang; Lin Hua; Xun Peng Qin; Zhi Li Hu; Zhou Wang; Yan Li Song; Yan Xiong Liu

doi:10.4028/www.scientific.net/AMM.711.206

Paper Titles

Research on the Effects of Calcination Temperature on the Physical Properties of Titanium Gypsum
p.189

Comparative Study of Two Laser Coatings Used in Turbine Blades
p.193

Desulfurization Gypsum Whisker Preparation and Performance Study
p.197

Energy Absorption of Basalt Filament Wound Rectangular Tubes: Experimental Study
p.201

Microstructures and Thermal Stabilities of High Silicon Aluminum Alloys Prepared by Spray Deposition
p.206

Synthesis of Several Micrometer-Size Cu Particles by a Green Wet Reduction Method
p.210

The New Progressive Polymeric Materials for the Reduction of VOC in the Woodworking Industry
p.214

Development of the Process of Manufacturing Pig Iron for Cast Iron from Copper Slag
p.218

Curve Cutting ZrO₂ Ceramic and Cooling Lower Surface Cutting Silicon Wafer with Laser Induced Thermal-Crack Propagation
p.222

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 711Microstructures and Thermal Stabilities of High...

Microstructures and Thermal Stabilities of High Silicon Aluminum Alloys Prepared by Spray Deposition

Abstract:

The microstructures and thermal stabilities of high silicon aluminum alloys prepared by spray deposition (SD) and subsequent heat treatment were studied. The results indicate that the size of the primary silicon in the deposited ingots is much smaller than that prepared by normal casting. After the subsequent heat treatment, the pores in deposited ingots are disappeared and their density increase to about 100%. While the size and volume fraction of the primary silicon in solidified hypereutectic Al-Si alloy increase with the increasing of silicon content, the corresponding thermal expansion coefficient decreases.

You might also be interested in these eBooks

Mechanical Engineering, Materials Science and Civil Engineering III

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 711)

Pages:

206-209

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.711.206

Citation:

Cite this paper

Online since:

December 2014

Authors:

Feng Huang, Lin Hua*, Xun Peng Qin, Zhi Li Hu, Zhou Wang, Yan Li Song, Yan Xiong Liu

Keywords:

High Silicon Aluminum Alloy, Microstructure, Spray Deposition, Thermal Stability

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] C. Cui, A. Schulz, K. Schimanski amd H. -W. Zoch: J. Mater. Process. Technol. 209(2009), pp.5220-5228.

Google Scholar

[2] F. Wang, B.Q. Xiong, Y.G. Zhang, B.H. Zhu, H.W. Liu and Y.G. Wei: Mater. Charact. 59(2008), pp.1455-1457.

Google Scholar

[3] Y.D. Jia, F.Y. Cao, S. Scudino, P. Ma, H.C. Li, L. Yu, J.G. Eckert and J.F. Sun: Mater. Des. 57(2014), pp.585-591.

Google Scholar

[4] X.M. Wang, S. Zhu, J.Z. Cui, Q. Chang and Q.F. Zhu: Appl. Mech. Mater. 556-562(2014), pp.620-623.

Google Scholar

[5] M. Shafei, N. Arab and K.Z. Madar: Appl. Mech. Mater. 467(2014), pp.16-19.

Google Scholar

[6] V.C. Srivastava, R.K. Mandal, S.N. Ojha and K. Venkateswarlu: Mater. Sci. Eng., A. 471(2007), pp.38-49.

Google Scholar

[7] Y.X. Li, J.Y. Liu, W.S. Wang and G.Q. Liu: Trans. Nonferrous Met. Soc. China. 32(2013), pp.970-976.

Google Scholar