Non-Metallic Materials from Waste Printed Circuit Boards (PCBs): Characteristics, Environmental Risk and Recycling

Abstract:

Printed circuit boards (PCBs) are the typical and fundamental components of almost all electric and electronic equipments. The mechanical and physical treatment of PCBs generates a large amount of non-metallic materials and thus there is an urgent need to develop alternative treatment methods for them. In this study, the characteristics and environmental risk of non-metallic materials were analyzed. The current recycling methods were investigated as well. The results showed that their chemical components were distinct for the glass fiber/epoxy laminated boards and paper/phenolic laminated boards. The presence of bromine, chlorine, copper, chromium and lead would pose a threat to the environment during its recycling. The current recycling methods included landfill, preparing composites and building materials, pyrolysis and combustion. These methods had their own distinct advantages and disadvantages. The comparative analysis indicated that preparing composites may be an alternative recycling method. Molten salt oxidation (MSO) technology is prospective and need be further studied.

• Periodical: Applied Mechanics and Materials (Volume 768)
• Pages: 576-587
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.768.576
• Online since: June 2015
• Authors: Zhi Tong Yao, Wen Yi Yuan, Zheng Miao Xie, Jun Hong Tang*
• Keywords: Dehalogenation, Environmental Risk, Molten Salt Oxidation (MSO), Non-Metallic Materials, Printed Circuit Boards, Recycling

References

[1] Y. Jang, T.G. Townsend, Leaching of lead from computer printed wire boards and cathode ray tubes by municipal solid waste landfill leachates, Environ. Sci. Technol. 37 (2003) 4778-4784.

DOI: 10.1021/es034155t

[2] J.Y. Guo, J. Guo, Z.M. Xu, Recycling of non-metallic fractions from waste printed circuit boards: A review, J. Hazard. Mater. 168 (2009) 567-590.

DOI: 10.1016/j.jhazmat.2009.02.104

[3] H. Wang, G. Gu, Y. Qi, Crushing performance and resource characteristic of printed circuit board scrap, Journal of Central South University of Technology 12 (2005) 552-555.

DOI: 10.1007/s11771-005-0121-y

[4] W.F. Jia, H.B. Duan, K. Hou, Analysis of recycling technology for nonmetallic materials from wasted printed circuit board, Environ. Sci. Technol. 33 (2010) 196-205.

[5] Y. Jiang, Assessment on the environment risk of the recycling of nonmetallic materials from waste printed circuit boards, Shanghai Jiao Tong University Master Dissertation, (2011).

[6] X.J. Wang, Y.W. Guo, J.Q. Zhang, Properties of non-metallic powder recycled from paper-based printed circuit boards and performance of composites, Journal of Chemical Industry and Engineering (China) 61 (2010) 795-800.

[7] H.R. Buser, Polybrominated dibenzofurans and dibenzo-p-dioxins: thermal reaction products of polybrominated diphenyl ether flame retardants, Environ. Sci. Technol. 20 (1986) 404-408.

DOI: 10.1021/es00146a015

[8] H. Wichmann, F.T. Dettmer, M. Bahadir, Thermal formation of PBDD/F from tetrabromobisphenol A–a comparison of polymer linked TBBP-A with its additive incorporation in thermoplastics, Chemosphere 47 (2002) 349-355.

DOI: 10.1016/s0045-6535(01)00315-0

[9] H. Thoma, S. Rist, G. Hauschulz, O. Hutzinger, Polybrominated dibenzodioxins and furans from the pyrolysis of some flame retardants, Chemosphere 15 (1986) 649-652.

DOI: 10.1016/0045-6535(86)90013-5

[10] R. Dumler, H. Thoma, D. Lenoir, O. Hutzinger, PBDF and PBDD from the combustion of bromine containing flame retarded polymers: a survey, Chemosphere 19 (1989) 2023-(2031).

DOI: 10.1016/0045-6535(89)90025-8

[11] M. Osako, Y.J. Kim, S. Sakai, Leaching of brominated flame retardants in leachate from landfills in Japan, Chemosphere 57 (2004) 1571-1579.

DOI: 10.1016/j.chemosphere.2004.08.076

[12] H.G. Ni, H. Zeng, S. Tao, E.Y. Zeng, Environmental and human exposure to persistent halogenated compounds derived from e-waste in China, Environ. Toxicol. Chem. 29 (2010) 1237-1247.

DOI: 10.1002/etc.160

[13] H.B. Duan, J.H. Li, Y.C. Liu, N. Yamazaki, W. Jiang, Characterizing the emission of chlorinated/brominated dibenzo-p-dioxins and furans from low-temperature thermal processing of waste printed circuit board, Environ. Pollut. 161 (2012) 185-191.

DOI: 10.1016/j.envpol.2011.10.033

[14] Y. Li, J.H. Li, C. Deng, Occurrence, characteristics and leakage of polybrominated diphenyl ethers in leachate from municipal solid waste landfills in China, Environ. Pollut. 184 (2014) 94-100.

DOI: 10.1016/j.envpol.2013.08.027

[15] J.J. Yang, W.X. Lu, AX. Zheng, Y. Zhuang, X.L. Li, G.X. Yang, Study on safety of the cement mortar comprising non-metallic residue of discarded print circuit boards, New Build. Mater. (6) 2006 64-65, 68.

[16] S.J. Wang, H. Zhang, L.M. Shao, S.M. Liu, P.J. He, Thermochemical reaction mechanism of lead oxide with poly(vinyl chloride) in waste thermal treatment. Chemosphere 117 (2014) 353-359.

DOI: 10.1016/j.chemosphere.2014.07.076

[17] A.O.W. Leung, N.S. Duzgoren-Aydin, K.C. Cheung, M.H. Wong, Heavy metals concentrations of surface dust from e-waste recycling and its human health implications in Southeast China, Environ. Sci. Technol. 42 (2008) 2674-2680.

DOI: 10.1021/es071873x

[18] Y.C. Chien, H.P. Wang, K.S. Lin, Y.J. Huang, Y.W. Yang, Fate of bromine in pyrolysis of printed circuit board wastes, Chemosphere 40 (2000) 383-387.

DOI: 10.1016/s0045-6535(99)00251-9

[19] J. Li, H. Lu, J. Guo, Z. Xu, Y. Zhou, Recycle technology for recovering resources and products from waste printed circuit boards, Environ. Sci. Technol. 41 (2007) 1995-(2000).

DOI: 10.1021/es0618245

[20] S.G. Hong, S.H. Su, The use of recycled printed circuit boards as reinforcing fillers in the polyester composite, J. Environ. Sci. Health A 31 (1996) 1345-1359.

DOI: 10.1080/10934529609376428

[21] W. Dang, M. Kubouchi, H. Sembokuya, K. Tsuda, Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid, Polymer 46 (2005) 1905-(1912).

DOI: 10.1016/j.polymer.2004.12.035

[22] M. Blazso, Z. Czegeny, C. Csoma, Pyrolysis and debromination of flame retarded polymers of electronic scrap studied by analytical pyrolysis, J. Anal. Appl. Pyrol. 64 (2002) 249-261.

DOI: 10.1016/s0165-2370(02)00035-9

[23] X.J. Niu, Y.D. Li, Treatment of waste printed wire boards in electronic waste for safe disposal, J. Hazard. Mater. 145 (2007) 410-416.

DOI: 10.1016/j.jhazmat.2006.11.039

[24] M. Blazso, Z. Czegeny, C. Csoma, Pyrolysis and debromination of flame retarded polymers of electronic scrap studied by analytical pyrolysis, J. Anal. Appl. Pyrol. 64 (2002) 249-261.

DOI: 10.1016/s0165-2370(02)00035-9

[25] C. Vasile, M.A. Brebu, M. Totolin, J. Yanik, T. Karayildirim, H. Darie, Feedstock recycling from the printed circuit boards of used computers, Energy Fuels 22 (2008) 1658-1665.

DOI: 10.1021/ef700659t

[26] C. Vasile, M.A. Brebu, T. Karayildirim, J. Yanik, H. Darie, Feedstock recycling from plastics and thermosets fractions of used computers. II. Pyrolysis oil upgrading, Fuel 86 (2007) 477-485.

DOI: 10.1016/j.fuel.2006.08.010

[27] S.L. Sun, J.D. Lu, S.J. Wang, L. Zeng, J. Zhang, Experimental research on pyrolysis of printed circuit board wastes and analysis of characteristics of products, J. Fuel Chem. Technol. 30 (2002) 285-288.

[28] W.J. Hall, P.T. Williams, Separation and recovery of materials from scrap printed circuit boards, Resour. Conserv. Recy. 51 (2007) 691-709.

DOI: 10.1016/j.resconrec.2006.11.010

[29] F. Barontini, K. Marsanich, L. Petarca, V. Cozzani, Thermal degradation and decomposition products of electronic boards containing BFRs, Ind. Eng. Chem. Res. 44 (2005) 4186-4199.

DOI: 10.1021/ie048766l

[30] H.L. Chiang, K.H. Lin, M.H. Lai, T.C. Chen, S.Y. Ma, Pyrolysis characteristics of integrated circuit boards at various particle sizes and temperatures, J. Hazard. Mater. 149 (2007) 151-159.

DOI: 10.1016/j.jhazmat.2007.03.064

[31] W.R. Dang, M. Kubouchi, S. Yamamoto, H. Sembokuya, K. Tsuda, An approach to chemical recycling of epoxy resin cured with amine using nitric acid, Polymer 43 (2002) 2953-2958.

DOI: 10.1016/s0032-3861(02)00100-3

[32] C. Mazzocchia, A. Kaddouri, G. Modica, R. Nannicini, G. Audisio, C. Barbieri, F. Bertini, Hardware components wastes pyrolysis: Energy recovery and liquid fraction valorization, J. Anal. Appl. Pyrol. 70 (2003) 263-276.

DOI: 10.1016/s0165-2370(02)00136-5

[33] C.V. Owens, C. Lambright, K. Bobseine, B. Ryan, L.E. Gray, B.K. Gullett, V.S. Wilson, Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste, Environ. Sci. Technol. 41 (2007).

DOI: 10.1021/es071425p

[34] Y. Huang, M. Takaoka, N. Takeda, K. Oshita, Partial removal of PCDD/Fs, coplanar PCBs, and PCBs from municipal solid waste incineration fly ash by a column flotation process, Environ. Sci. Technol. 41 (2007) 257-262.

DOI: 10.1021/es061086k

[35] J.R. Kennerley, R.M. Kelly, N.J. Fenwick, S.J. Pickering, C.D. Rudd, Characterization and reuse of glass fibres recycled from scrap composites by the action of a fluidized bed process, Compos. Pt. A: Appl. Sci. Manuf. 29 (1998) 839-845.

DOI: 10.1016/s1359-835x(98)00008-6

[36] S.J. Pickering, R.M. Kelly, J.R. Kennerley, C.D. Rudd, N.J. Fenwick, A fluidisedbed process for the recovery of glass fibres from scrap thermoset composites, Compos. Sci. Technol. 60 (2000) 509-523.

DOI: 10.1016/s0266-3538(99)00154-2

[37] C. Li, Z.X. Sun, Z.G. Shen, Experimental study and analysis on use of energy from non-metallic materials of waste printed circuit boards, China Powder Sci. Technol. 17 (2011) 12-15.

[38] Z.T. Yao, J.H. Li, X.Y. Zhao, Molten salt oxidation: A versatile and promising technology for the destruction of organic-containing wastes, Chemosphere 84 (2011) 1167-1174.

DOI: 10.1016/j.chemosphere.2011.05.061

[39] Z. T Yao, X.Y. Zhao, J.H. Li, Study on 1, 2, 3-trichlorobenzene destruction in a binary (Na, K)2CO3 molten salt oxidation system. Environ. Prog. Sustain. 33 (2014) 65-69.

DOI: 10.1002/ep.11751

[40] F. Li, Z.L. Zhao, H.B. Li, Y. Chen, X.B. Wang, Gasification of waste printed circuit boards (PCB) in molten salts: Ⅲ Experimental study on metal distribution and recovery, Acta Scientiae Circumstantiae 28 (2008) 1586-1592.

[41] F. Li, Z.L. Zhao, H.B. Li, Y. Chen, Y.M. Wu, Study on gasification characteristics of waste p rinted circuit boards (PCB) in molten salts, Acta Scientiae Circumstantiae 27 (2007) 1851-1857.

[42] Z.T. Yao, J.H. Li, X.Y. Zhao, Destruction of decabromodiphenyl ether (BDE-209) in a ternary carbonate molten salt reactor. J. Environ. Manage. 127 (2013) 244-248.

DOI: 10.1016/j.jenvman.2013.04.040

[43] Z.G. Shen, C.J. Cai, Y.S. Xing, S.L. Ma, Recycling and reusing of nonmetal materials from waste printed circuit boards, Chem. Eng. 34 (2006) 59-62.

[44] P. Mou, D. Xiang, X.Y. Pan, L. Wa, J.G. Gao, G.H. Duan, New solutions for reusing nonmetals reclaimed from waste printed circuit boards, ISEE '05 Proceedings of the International Symposium on Electronics and the Environment, DC, USA, 2005, 205-209.

DOI: 10.1109/isee.2005.1437026

[45] P. Mou, D. Xiang, G.H. Duan, Study on compound board making process by using nonmetals separated from waste printed circuit boards, J. Univ. Sci. Technol. Beijing 28 (2006) 328-330.

[46] J. Guo, J. Li, Q.L. Rao, Z.M. Xu, Phenolic molding compound filled with nonmetals of waste PCBs, Environ. Sci. Technol. 42 (2008) 624-628.

DOI: 10.1021/es0712930

[47] B.C. Ban, J.Y. Song, J.Y. Lim, S.K. Wang, K.G. An, D.S. Kim, Studies on the reuse of waste printed circuit board as an additive for cement mortar, J. Environ. Sci. Heal. A 40 (2005) 645-656.

DOI: 10.1081/ese-200046618