The Key Technologies of the Hydraulic Test of 2m×2m Supersonic Wind Tunnel

Yan Shi; Zong Zheng Liu; Wen Guo Yang

doi:10.4028/www.scientific.net/AMM.851.406

Paper Titles

Design and Fabrication of Gamma-Type Stirling Engine on Parabolic Dish of Solar Concentrator by a Compression Ratio Method
p.383

Design and Test of 4LMD-160 Hemp Harvester
p.389

Multi-Scale Amplitude Modulation Effect of Wind Speed Random Fluctuation
p.396

Selection and Comparison of Power Cable Accessories
p.402

The Key Technologies of the Hydraulic Test of 2m×2m Supersonic Wind Tunnel
p.406

Development of the Field of Cotton Plant Protection Robot Precise Multi-Topping Control System
p.415

Sensorless Speed Control of Induction Motors with Method of Least Squares
p.421

Development of the Field of Wheat Plant Protection Precision Spraying Robot Control System
p.427

A Small-Line Segment Dynamic Transition Algorithm Based on Axial Error Tolerance
p.433

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 851The Key Technologies of the Hydraulic Test of...

The Key Technologies of the Hydraulic Test of 2m×2m Supersonic Wind Tunnel

Abstract:

The hydraulic test on the main circuit of the 2m×2m supersonic wind tunnel is necessary for testing the design and manufacturing quality for the safe running . The finite element stress analysis of the main circuit in the load cases of hydraulic test was introduced. According to the simulation result, some important points outside and inside of the tunnel were selected as the monitoring places. To get the necessary result, some of the resistance strain chips were arranged in the water and the corresponding sticking process was considered as the in-water process was first introduced in the test. The response functions of structure stress under external loads were obtained. The result shows that the stress and deformation is consistent with the simulation in quantity and trend. The result also indicates that the load case processing method used in the FEM are reasonable, and the maximal stress value and displace value is allowable for the future running of the wind tunnel.

You might also be interested in these eBooks

Advanced Materials, Structures and Mechanical Engineering II

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 851)

Pages:

406-411

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.851.406

Citation:

Cite this paper

Online since:

August 2016

Authors:

Yan Shi*, Zong Zheng Liu, Wen Guo Yang

Keywords:

Finite Element Method (FEM), Hydraulic Test, Monitor, Wind Tunnel

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] C. Q. Wang, G. D. Xie, Z. C. Liu, The hydraulic Test Technology of 2. 4 Tunnel Shell, J. Fluid Mech. Exp. Meas. (04) (2002) 64-69.

Google Scholar

[2] Y. J. Xie, Q. Guo, C. S. Xiao, H. J. Xue, Z. X. Xi, The FEM Calculation And Hydraulic test of NF-6 Wind Tunnel, J. Exp. Fluid Mech. (02) (2005) 91-95.

Google Scholar

[3] Z. H. Chen, W. H. Chen. The Structure Design and FEM Analysis of High Angle of Attack Mechanism of 2. 4 Wind Tunnel, J. Exp. Fluid Mech. (04) (2008) 80-84.

Google Scholar

[4] G. Q. Dong, Z. R. Wang, C. J. Hu, S. J. Yuan, Z. F. Li, Q. Li, The FEM Analysis And Air Pressure Test of Low Speed Pressurized Wind Tunnel of FL-9, J. Exp. Fluid Mech. (04) (2007) 77-82.

Google Scholar

[5] Z. C. Liu, The Design of Wind TunnZel Structure, Published by China Aerospace Press, 2005, 125-157.

Google Scholar

[6] H. H. Chen, The Guidance of Marc Finite Element Analysis, Published by China Machine Press, 2008, 88-90.

Google Scholar