A Case Study on Insulating Main Steam Line (MSL) with Silica Aerogel

Abstract:

In this paper, a case study on replacing the existing insulating material (Mineral wool) by the Silica Aerogel in the main steam line (MSL) of the thermal power plant is presented.A sample length of 3 m in MSL was insulated with various thicknesses of silica aerogel, mineral wool and the combinations of mineral wool and silica aerogel. The heat loss in the sample length with different insulating material was calculated by carrying out field experiments. The results show that the silica aerogel is providing better insulation than the mineral wool. Nonetheless, the use of silica aerogel is expensive. To bring down the cost, hybrid insulation with the optimal thickness of silica aerogel + mineral wool + silica aerogel was suggested. This hybrid combination considerably reduced the heat loss and improved the thermal efficiency. The payback period for this implementation was reported.

• Periodical: Applied Mechanics and Materials (Volume 852)
• Pages: 693-698
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.852.693
• Online since: September 2016
• Authors: J. Manohar*, S. Ramprakash, G. Selvakumar, Dhiliban Dhiliban
• Keywords: Hybrid Insulation, Insulation, Mineral Wool, Payback Period, Silica Aerogel

References

[1] Information on http: /coal. nic. in/content/coal-reserves.

[2] Zhao Haiqian, Liu Xiaoyan, Liu Lijun, Wu Yongning, Li Xiaohui, Zhou Ying. 2012. Study on New Thermal Insulation Construction of Thermal Recovery Boiler, Energy Procedia 16 , 466 – 1471.

DOI: 10.1016/j.egypro.2012.01.231

[3] F. Stazia, F. Tittarellib, G. Politia, C. Di Pernac, P. Munafoa. 2014. Assessment of the actual hygrothermal performance of glass mineral wool insulation applied 25 years ago in masonry cavity walls, Energy and Buildings, Volume 68, Part A, January, Pages 292–304.

DOI: 10.1016/j.enbuild.2013.09.032

[4] F. Stazia, C. Di Perna, P. Munafo. 2009. Durability of 20-year-old external insulation and assessment of various types ofretrofitting to meet new energy regulations, Energy and Buildings, 721–731.

DOI: 10.1016/j.enbuild.2009.02.008

[5] Alireza Bahadori , Hari B. Vuthaluru. 2010. A simple method for the estimation of thermal insulation thickness, Applied Energy, 613–619.

DOI: 10.1016/j.apenergy.2009.05.012

[6] TaniaBerger, Christof Amann, Herbert Formayer, Azra Korjenic, Bernhard Pospichal, Christoph Neururer, Roman Smutny. 2016. Impacts of external insulation and reduced internal heat loads uponenergy demand of offices in the context of climate change in Vienna, Austria, Journal of Building Engineering , 86–95.

DOI: 10.1016/j.jobe.2015.11.005

[7] A.M. Papadopoulos, E. Giama. 2007. Environmental performance evaluation of thermal insulation materialsand its impact on the building, Building and Environment, 2178–2187.

DOI: 10.1016/j.buildenv.2006.04.012

[8] Jari Virta, Minna Koivula, Tareq Hussein, Simo Koponen, Hannu Hakkarainen, Hanna-Riitta Kyma lainen, Kaarle Hameri, Markku Kulmala, Mikko Hautala. 2005. Emissions from thermal insulations—part 1: development andcharacteristics of the test apparatus, Building and Environment , 797–802.

DOI: 10.1016/j.buildenv.2004.08.009

[9] A.M. Papadopoulos. 2005. State of the art in thermal insulation materials and aims for future developments, Energy and Buildings, 77–86.

DOI: 10.1016/j.enbuild.2004.05.006

[10] Hajar Maleki , Luisa Duraes, Antonio Portugal. 2014. An overview on silica aerogels synthesis and different mechanicalreinforcing strategies, Journal of Non-Crystalline Solids , 55–74.

DOI: 10.1016/j.jnoncrysol.2013.10.017

[11] Gaosheng Wei, Yusong Liu, Xinxin Zhang, Fan Yu, Xiaoze Du. 2011. Thermal conductivities study on silica aerogel and its composite insulationmaterials, International Journal of Heat and Mass Transfer , 2355–2366.

DOI: 10.1016/j.ijheatmasstransfer.2011.02.026

[12] Ya-Ling He, Tao Xie. 2015. Advances of thermal conductivity models of nanoscale silica aerogelinsulation material, Applied Thermal Engineering , 28-50.

DOI: 10.1016/j.applthermaleng.2015.02.013