Effect of Sputtering Current on the Structure of TiCrN Thin Films Prepared from Mosaic Target by Reactive DC Magnetron Sputtering

Abstract:

TiCrN thin films have been prepared using a reactive DC magnetron sputtering system from a mosaic target. The effects of sputtering current, in the range of 300 to 700 mA, on the structure of the thin films were investigated. The crystal structure, microstructure, thickness, and composition were characterized by GI-XRD, FE-SEM and EDS technique, respectively. The results revealed that all the as-deposited films were formed as a (Ti,Cr)N solid solution. The as-deposited TiCrN films showed a nanostructure with a crystallite size less than 70 nm. The crystal sizes of all planes were in the range of 22.2 to 69.9 nm. The lattice constants were in the range of 4.149 Å to 4.175 Å. The thickness increases from 1630 nm to 4910 nm with increasing the sputtering current. The elemental composition (Ti Cr and N contents) of the as-deposited films were varied with the sputtering current. Lastly, the all of the thin films in this work showed compact columnar and dense morphology as a resulted of increasing the sputtering current.

• Periodical: Applied Mechanics and Materials (Volume 901)
• Pages: 37-42
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.901.37
• Online since: August 2020
• Authors: Siriwat Alaksanasuwan, Adisorn Buranawong, Nirun Witit-Anun*
• Keywords: Mosaic Target, Reactive Magnetron Sputtering, Sputtering Current, Thin Films, TiCrN

References

[1] W.L. Wang, R.Q. Zhang, K.J. Liao, Y.W. Sun, B.B. Wang, Nucleation and growth of diamond films on aluminum nitride by hot filament chemical vapor deposition, Diamond and Related Materials. 9 (2000) 1660-1663.

DOI: 10.1016/s0925-9635(00)00321-6

[2] L. Xuechao, L. Changsheng, Z, Ye, T. Hua, L. Guowei, M. Chaochao, Tribological properties ot th Ti-Al-N thin films with different components fabricated by double-targeted co-sputtering, Applied Surface Science. 256 (2010) 4272-4279.

DOI: 10.1016/j.apsusc.2010.02.014

[3] S. Kulwant, A.C. Bidaye, A.K. Suri, Experimental verification of model for prediction of coating composition deposited by sputtering using mosaic target in nitrogen, Vacuum. 86 (2011) 56-61.

DOI: 10.1016/j.vacuum.2011.04.013

[4] N. Witit-anun, A. Teekhaboot, Effect of Ti sputtering current on structure of TiCrN thin films prepared by reactive DC magnetron co-sputtering. Key Engineering Materials. 675-676 (2016) 181-184.

DOI: 10.4028/www.scientific.net/kem.675-676.181

[5] P.W. Shum, K.Y. Li, Y.G. Shen, Improvement of high-speed turning performance of Ti–Al–N coatings by using a pretreatment of high-energy ion implantation, Surface and Coatings Technology. 198 (2004) 414-419.

DOI: 10.1016/j.surfcoat.2004.10.109

[6] D.A. Golosoc, S.N. Melnikov, A.P. Dostanko, Calculation of the elemental composition of thin films deposited by magnetron sputtering of mosaic targets, Surface Engineering and Applied Electrochemistry. 48 (2012), 52-59.

DOI: 10.3103/s1068375512010073

[7] K.H. Lee, C.H. Park, Y.S. Yoon, J.J. Lee, Structure and properties of (Ti1-xCrx)N coatings produced by the ion-plating method, Thin Solid Films. 385 (2001) 167-173.

DOI: 10.1016/s0040-6090(00)01911-8

[8] W.D. Callister, Materials science and engineering: an introduction, 7th ed., John Wiley & Sons, New York, (2007).

[9] D.H. Zhang, T.L. Yang, J. Ma, Q.P. Wang, R.W. Gao, H.L. Ma. Preparation of transparent conducting ZnO:Al films on polymer substrates by r. f. magnetron sputtering, Applied Surface Science. 158(2000) 43-48.

DOI: 10.1016/s0169-4332(99)00591-7