Research on Comprehensive Technology of Steel Grid Installation and Integral Jacking

Abstract:

In this paper, through the construction simulation of the installation and jacking of a large steel grid project, ANSYS software is used to select the corresponding finite element module, and by analyzing the construction models of different modes and different load conditions, the analysis results and structural models are displayed. The 12 supporting hydraulic jacks can meet the overall steel structure hoisting requirements on site. At the same time, the calculation model takes into account the deformation of the overall grid during the unloading process. After testing, the maximum displacement is 7mm, which meets the requirements of national regulations. This method better supports the construction guidance, and also achieved good benefits during the on-site implementation process. The installation plan and jacking technology are worthy of reference.

• Periodical: Applied Mechanics and Materials (Volume 909)
• Pages: 63-68
• DOI: https://doi.org/10.4028/p-d92p6g
• Online since: September 2022
• Authors: Zheng Ji Li*, Chun Hui Wang, Qiu Shi Han, Zhen Zhen Quan, Hai Xuan Zhang
• Keywords: Jacking Up, Steel Grid, Steel Structure, Steel Structure Construction

References

[1] Wang Sen,Liu Chang,Zhang Yinhui. Fully convolution network architecture for steel-beam crack detection in fast-stitching images[J]. Mechanical Systems and Signal Processing,2022,165.

DOI: 10.1016/j.ymssp.2021.108377

[2] Zhao Huatian,Shi Gang,Chen Xuesen,Xiao Tanshu. Finite element analysis and design of retrofitted beam-to-column joints with welded haunches[J]. Journal of Constructional Steel Research,2021,186.

DOI: 10.1016/j.jcsr.2021.106924

[3] Dekun Tan. Quantum-behaved Particle Swarm Optimization for Optimization Design of Steel Structural Element Sections under Axial Compressive Loads[C]//Future Wireless Networks and Information Systems Volume 2（ICFWI 2011 LNEE 144）.,2011:730-736.

DOI: 10.1007/978-3-642-27326-1_97

[4] Defa Sun. Teaching Practice of the Course of Steel Structure Based on Blackboard Platform[C]//Economic, Education and Management(ICEEM 2011 V1).,2011:102-104.

[5] Yuman Luo, Binyang Ding. Research on Jacking Construction Process of Steel Truss Bridge Across Highway[J]. International Core Journal of Engineering,2021,7(8).

[6] Liu Jinxin, Ma Xiaowei,Zhang Xin. Research on bearing jacking method of steel -concrete composite beam bridge[J]. IOP Conference Series: Earth and Environmental Science, 2021, 647(1):.

DOI: 10.1088/1755-1315/647/1/012118

[7] Bo Wu, Xiaolu Chen, Mingqin Zhao, Xiaomin Yang,Zhiyong Zhou. Application of displacement synchronization automatic control jacking technology in upgrading and reconstruction project of super large aqueduct of South-to-North Water Diversion Project[J]. E3S Web of Conferences, 2021, 248.

DOI: 10.1051/e3sconf/202124803040

[8] Rian Burnang Purba,Purba Rian Burnang,Juswan,Alie Muhammad Zubair Muis. Structural response analysis of jack-up during system jacking lifting process[J]. IOP Conference Series: Earth and Environmental Science, 2020, 575(1).

DOI: 10.1088/1755-1315/575/1/012201