Applied Mechanics and Materials

ISSN: 1662-7482

Main Themes

Volumes
Edited by: Giorgio Monti and Enzo Martinelli
Online since: July 2016
Description: After the successful conference of Changsha (China) in 2012, the 2nd International Symposium on Advances in Civil and Infrastructure Engineering (ACE) was held in Vietri sul Mare, Italy, in June 2015. ACE 2015, an official conference of the International Association for Innovation in Structural Engineering (iStruct), aims at providing an international forum where researchers and practitioners can be updated on the most recent advances in the field of civil engineering, with special reference to innovation in materials, concepts and new trends in modeling, design, construction and monitoring of structures. This book collects the proceedings of the works presented during the ACE 2015 Conference.

847

Edited by: Yuantong Gu, Hong Guan, Emilie Sauret, Suvash Saha, Haifei Zhan, Rodney Persky
Online since: July 2016
Description: The present volume of “Applied Mechanics and Materials” contains 107 selected full-length papers from the 2nd Australasian Conference on Computational Mechanics held in Brisbane, Australia on 30 November 2015 to 1 December 2015 (ACCM2015).
The collected articles well reflect the latest progress made in some emerging areas of computational mechanics, including finite element method, finite volume method, meshless method, atomic and multiscale modelling method, structural and solid mechanics, computational fluid dynamics, geomechanics, computational biomechanics, structural and topology optimization, fracture and damage mechanics, and vibration and dynamics.

846

Edited by: S.A. Kristiawan, E. Schlangen and H. Jonkers
Online since: July 2016
Description:

ICRMCE (International Conference on Rehabilitation and Maintenance in Civil Engineering) is a triennial event started since 2009 to provide a forum for researchers, academicians (lecturers and students), government agencies, consultants and contractors to exchange experiences, technological advancement and innovation related to materials and technologies in construction, methods and techniques of rehabilitation and maintenance of buildings, earthquake resistance of structures and buildings, transportation engineering and project management in modern construction. The 3rd ICRMCE was hosted by the Civil Engineering Department, Sebelas Maret University on 19-21 November 2015 in Solo (Surakarta), Indonesia. The papers presented in this conference discussed various aspects that contribute to the development of sustainable technologies in creation of the civil infrastructures.

845

Edited by: Antoni Świć, Jarosław Zubrzycki
Online since: July 2016
Description: This collection collects selected peer-reviewed papers from International Conference on Science and Technology “Automation and robotics in production engineering”, held on July, 08th – 10th 2015, Lublin, Poland.
The objective of the book is to provide the presentation of the latest research findings and practical experience in the area of robotics and automated production lines.

844

Edited by: Vladimír Křístek, Alexander N. Kravcov, Andrey V. Korchak and Vaclav Pospíchal
Online since: July 2016
Description: The International Conference on Safety Design and Construction of Underground Structures (SDeCUS 2016) is a conference intended to be a forum for researchers in all related fields, in addition to those listed under the conference topics, as well as case studies describing practical experiences. The conference is aimed on Safety in construction have the highest priority in the engineering of a underground structures and have to be fully integrated into the every stage of activities like design, construction and exploitation. This theme is of a great importance for researching a new more safety technology development.

843

Edited by: M. Mahardika
Online since: June 2016
Description: The conference theme is Green Manufacturing. The green manufacturing is a method for manufacturing that minimizes waste and pollution. Therefore, the 8th RCMME and ICMME 2015 is a place for the discussion of optimizing mechanical and manufacturing processes by minimizing waste and pollution. The aim of the conference is to facilitate the exchange of experiences and research results in all aspects of Materials and Technologies in Modern Mechanical Engineering, especially in terms of green manufacturing.

842

Edited by: Prof.univ. Adrian Olaru
Online since: June 2016
Description: The Organizing Committee warmly welcomes our distinguished delegates and guests to the 11th edition of the IACSIT/IACT/UASTRO International Conference on Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Biomechatornics and Neurorehabilitation (OPTIROB 2016), held on June 29 - July 2, 2016, Jupiter, Constanta, ROMANIA.
Presented collection will be useful for researchers and engineers from area of Material Processing, General Mechanical Engineering, Aerospace Techniques, Energy, Mechatronics and Robotics.

841

Edited by: Thorsten Schüppstuhl, Kirsten Tracht, Jörg Franke
Online since: June 2016
Description: Presented collection prepared by results of work the 1st MHI Colloquium (24.02 - 25.02.2016, Hamburg, Germany) and devoted to decision of many issues related with industrial robotics and automated production lines and manufactures. This volume will be useful for many scientists and engineers connected with automation of modern manufacturing processes.

840

Edited by: Pupong Pongcharoen
Online since: June 2016
Description:

Collection of selected peer reviewed papers from Naresuan University, International Conference on Energy: World Future Alternatives (NU-ICE 2015), November 30 – December 2, 2015, Phitsanulok, Thailand is dedicated to various aspects of the modern usage of alternative energy sources and technologies of energy saving.

839

Edited by: Jan Stąsiek, Jacek Kropiwnicki, Sławomir Makowski
Online since: June 2016
Description: The presented book represents cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of materials, tools, machines and machine parts in the automotive technics and to widen their practical application.

838

Showing 31 to 40 of 558 Main Themes