Study on the Dullness of Monolayer Brazed Diamond Grinding Wheel through Plate Wheel Dressing

Kun Zhang; Hong Hua Su; Feng Ming Dai

doi:10.4028/www.scientific.net/AMR.1027.159

Paper Titles

In Situ Measurement and Compensation Turning Technique of Deep MgF₂ Conformal Dome
p.136

Investigation of Surface Integrity on TC4-DT in High Speed Grinding with CBN Wheel
p.140

Experimental Study of SiC Ceramic Grinding Subsurface Cracks
p.146

Finite Element Simulation of Shearing Force in Disc Slitting Process
p.150

Study on the Dullness of Monolayer Brazed Diamond Grinding Wheel through Plate Wheel Dressing
p.159

Simulation of Temperature Distribution in HFCVD Diamond Films Growth on the Multitudinous Micro End Mills
p.163

Analysis on the Influence of Oxidant in CMP of Ultra-Thin Stainless Steel
p.167

Comparison of Fe Catalyst Species in Chemical Mechanical Polishing Based on Fenton Reaction for SiC Wafer
p.171

Introduction of Premixed Micro-Abrasive Water Jet Technology for Deburring
p.177

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1027Study on the Dullness of Monolayer Brazed Diamond...

Study on the Dullness of Monolayer Brazed Diamond Grinding Wheel through Plate Wheel Dressing

Abstract:

A monolayer brazed diamond grinding wheel was dressed 23 times with a plate wheel. The grinding forces were measured during the grinding experiments which carried out on SiC ceramics after each dressing interval. The surface roughness of SiC ceramics was also measured. In this study, the dullness of the grinding wheel during the dressing procedure is mainly discussed. The results showed that the surface roughness of SiC ceramics reduced a lot after dressing which means the dressed grinding wheel can meet the requirements of precision machining. On the premise of this, there was no obvious dullness occurred on the grits of the grinding wheel during dressing because new cutting edges had emerged.

You might also be interested in these eBooks

Ultra-Precision Machining Process and Surface Finishing Technology

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1027)

Pages:

159-162

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1027.159

Citation:

Cite this paper

Online since:

October 2014

Authors:

Kun Zhang, Hong Hua Su*, Feng Ming Dai

Keywords:

Dullness, Monolayer Brazed Diamond Grinding Wheel, Plate Wheel Dressing, SiC Ceramic

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Su.H. H, Fu.Y. C, and Xu.J. H, Dressing of Monolayer Brazed Diamond Wheel for Grinding Li-Ti Ferrite. Advanced Materials Research Vol. 126-128(2010) 995-1000.

DOI: 10.4028/www.scientific.net/amr.126-128.995

Google Scholar

[2] Su.H. H, Xu.J. H, and Fu.Y. C, Experimental Study on Performance of Monolayer Brazed Diamond Wheel Through Chemical-Mechanical Dressing. Advanced Materials Research Vol. 325(2011) 208-212.

DOI: 10.4028/www.scientific.net/amr.325.208

Google Scholar

[3] Zhang. B, Shen.J. Y, and Xu.X. P, Experimental Study on Truing of Brazed Diamond grinding Wheel. Diamond & Abrasives Engineering Vol. 6(2007) 19-22.

Google Scholar

[4] Zhang. B, Fu.Y. C, and Su.H. H, Precision Dressing of Monolayer Brazed Diamond Grinding Wheel and Its Evaluation. Tool Engineering Vol. 46(2012) 16-19.

Google Scholar

[5] Xu. W, Su.H. H, and Xu.J. H, Experimental Research on Dressing of Monolayer Brazed Diamond Grinding Wheel with Plate wheel. Diamond & Abrasives Engineering Vol. 1(2012) 38-41.

DOI: 10.4028/www.scientific.net/amr.1027.159

Google Scholar