Reduce Cold Filter Plugging Point and Kinematic Viscosity of Cottonseed-Based Biodiesel Fuel

Yong Bin Lai; Yu Qi Zhang; Xiu Chen; Yin Nan Yuan; Ling Ling Cai; Xin Qiao; Meng Hong Yuan

doi:10.4028/www.scientific.net/AMR.1033-1034.129

Paper Titles

Effects of Al-Doping on the Thermoelectric Properties of ZnO:Al Thin Films
p.110

Effects of Dilute Alkali Pretreatment on Chemical Components and Fermentable Sugars and Structure of Bamboo
p.114

Fourier Transform Infrared Spectroscopic Analysis of the Raw and Tectonic Coals Extracts with Ultrasonic
p.119

Li₂MnSiO₄/C Composite with Ascorbic Acid as Carbon Source for Lithium Ion Batteries
p.125

Reduce Cold Filter Plugging Point and Kinematic Viscosity of Cottonseed-Based Biodiesel Fuel
p.129

Study on the Fermentation Conditions of β-Glucosidase from Aspergillus niger
p.133

Viscosity-Temperature Characteristic of Biodiesel Derived from Pistacia Chinensis Oil
p.138

Comparative Study on Microwave Co-Pyrolysis Products of Low Rank Coal in CO₂ and N₂ Atmosphere
p.142

Energy Consumption Analysis of Air Separation Process for Oxy-Fuel Combustion System
p.146

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 1033-1034Reduce Cold Filter Plugging Point and Kinematic...

Reduce Cold Filter Plugging Point and Kinematic Viscosity of Cottonseed-Based Biodiesel Fuel

Abstract:

The chemical compositions, cold filter plugging point (CFPP) and kinematic viscosity of cottonseed methyl ester (CSME) are investigated. Through blending with-10 petrodiesel (-10PD) and treating with Flow Fit, the CFPP and kinematic viscosity of CSME are improved. The study shows that CSME is mainly composed of fatty acid methyl esters (FAME), and the contents of saturated fatty acid methyl ester (SFAME) and unsaturated fatty acid methyl ester (UFAME) were 27.69% and 71.65% respectively. The CFPP and kinematic viscosity (40 °C) of CSME are-1 °C and 4.63 mm²/s respectively. Blending with-10PD decreased the CFPP of CSME to-12 °C.With temperature decreasing, the kinematic viscosities of CSME and CSME/-10PD increase. The lower the temperature is, the more differenced the kinematic viscosities of CSME and CSME/-10PD are. Treating with less than 3% (volume fraction) of Flow Fit, the CFPP of CSME and CSME/-10PD decreased significantly.

You might also be interested in these eBooks

Advances in Chemical Engineering and Advanced Materials IV

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 1033-1034)

Pages:

129-132

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1033-1034.129

Citation:

Cite this paper

Online since:

October 2014

Authors:

Yong Bin Lai*, Yu Qi Zhang, Xiu Chen, Yin Nan Yuan, Ling Ling Cai, Xin Qiao, Meng Hong Yuan

Keywords:

Biodiesel, Cold Filter Plugging Point, Cottonseed Oil, Kinematic Viscosity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] G. D. Dong, Y. J. Wang, W. D. Zhang, et al: Petrochemical Technology Vol. 42 (2013), P. 737.

Google Scholar

[2] Y. N. Yuan, X. Chen, Y. B. Lai, et al: Transactions of the Chinese Society of Agricultural Engineering Vol. 29(2013), P. 212 (In Chinese).

Google Scholar

[3] Z. Jurac, V. Zlatar: Fuel Processing Technology Vol. 106 (2013), P. 106.

Google Scholar

[4] X. Chen,Y. N. Yuan, Y. B. Lai: Transactions of the Chinese Society of Agricultural Engineering Vol. 26(2010), P. 227 (In Chinese).

Google Scholar

[5] B. S. Chen, Y. Q. Sun, J. H. Fang, te al: Soybean Science Vol. 28(2009), P. 148 (In Chinese).

Google Scholar

[6] E.F.S.M. Ramalho, J.R. Carvalho Filho, A.R. Albuquerque, et al: Fuel Vol. 93(2012), P. 601.

Google Scholar

[7] Y. Lv, J. Li, F. S. Ouyang: Joual of Fuel Chemistry and Techenology Vol. 39 (2011), P. 190.

Google Scholar

[8] X. T. Chen, S. C. Yu, Z. H. Zhu: Biomass Chemical Engineering Vol. 43(2009), P. 28(In Chinese).

Google Scholar

[9] P. Lv, Y. F. Cheng, L. M. Yang, et al: Fuel Processing TechnologyVol. 110(2013), P. 61.

Google Scholar

[10] B. S. Chen, Y. Q. Sun, J. H. Fang, te al: Biomass and Bioenergy Vol. 34(2010), P. 1309.

Google Scholar