Study on Seismic Fortification Level of Electrical Equipment

Min Zhong; Yu Han Sun; Qian Zhang; Zhen Lin Liu

doi:10.4028/www.scientific.net/AMR.1065-1069.1497

Paper Titles

Progress in Seismic Research on Electrical Equipments in Substations
p.1474

Shaking Table Test on 145 kV HV Reactor Composite Bushing
p.1480

Some Remarks on Single-Channel and Multi-Channel Seismic in Offshore Engineering Geological Exploration
p.1485

Study of Shaking Table Test on Seismic Performance of 750 kV Post Insulator
p.1491

Study on Seismic Fortification Level of Electrical Equipment
p.1497

Study on Seismic Response of the Structure Based on New-Style Isolation Bearings
p.1503

Study on Slope Stability Evaluation Methods under Seismic Load
p.1508

Study on the Performance-Based Aseismic Design for RC Frame with Mild Steel Shear Damper
p.1513

The Simplified Model and the Critical Angle of the Curved Bridges with Multi-Dimensional Earthquake Excitation
p.1518

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 1065-1069Study on Seismic Fortification Level of Electrical...

Study on Seismic Fortification Level of Electrical Equipment

Abstract:

Considering the important role of the electrical equipments in the power grid, electrical equipment seismic fortification level should be further improved. Through comparison of electrical equipment related seismic codes in China and abroad,it is recommended that the seismic fortification level of electrical equipment is taken as strong shock, whose exceeding probability is 2% in 50 years.Combined with the results of typical groundby seismic hazardanalysis in different fortification intensity zones, the peak acceleration values corresponding to suggest seismic fortification level was proposed, that is 2 times of the value of medium shock.

You might also be interested in these eBooks

Civil, Structural and Environmental Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 1065-1069)

Pages:

1497-1502

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1065-1069.1497

Citation:

Cite this paper

Online since:

December 2014

Authors:

Min Zhong*, Yu Han Sun, Qian Zhang, Zhen Lin Liu

Keywords:

Electrical Equipment, Medium Shock, Seismic Fortification Level, Seismic Hazard Analysis, Strong Shock

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] GB18306—2001. Seismic Ground Motion Parameter Zonation Map of China[S]. China Standard Press, Beijing, 2001.

Google Scholar

[2] GB50223—2008. Standard for Classification of Seismic Protection of Building Constructions[S]. China Architecture & Building Press, Beijing, (2008).

Google Scholar

[3] GB50260—2013. Code for Seismic Design of Electrical Installations[S]. China Planning Press, Beijing, (2013).

Google Scholar

[4] GB50556—2010. Code for Seismic Design of Electrical Facilities in Industrial Plants[S]. China Planning Press, Beijing, (2010).

Google Scholar

[5] IEEE Std 693-2005．IEEE Recommended Practice for Seismic Design of Substations[S]. IEEE Power Engineering Society，2005.

Google Scholar

[6] IEC62271-2: 2003．High-voltage switchgear and control gear—Part 2: Seismic qualification for rated voltages of 72. 5kV and above[S].

DOI: 10.3403/02839644u

Google Scholar

[7] GB 17741—2005. Evaluation of Seismic Safety for Engineering Sites[S]. China Standard Press, Beijing, 2005.

Google Scholar