Electrical Properties and Morphology of Electrodeposited Cobalt-Nickel-Iron on Flexible Printed Circuits

Abstract:

Electrodeposition is a method to electrochemically deposit alloy on various types of metal. This method has ability to produce protective coating and thin films on the metal. In this research, one of the electrodeposition methods, Cyclic Voltammetry (CV) with 10 and 20 cycles was applied to deposit Cobalt-Nickel-Iron (Co-Ni-Fe) on Electroless Nickel Immersion Gold (ENIG) Flexible Printed Circuits (FPCs). The main purpose of this paper is to investigate the electrical properties, morphology and crystallographic structure of the electrodeposited coating. Curve Trace test was conducted to identify the contact resistance of the coating. In this case, the allowable contact resistance should be less or the same as ENIG FPCs which is 1.6 Ω. Morphology of the coated circuit was observed by using FESEM while crystallographic phase of the coating was identified by XRD. Morphology study on Co-Ni-Fe coated FPCs exhibited Cauliflower like shape with average grain size of 1.49 μm and 1.88 μm for 10 and 20 cycles, respectively. CoFe, FeNi and CoO.NiO phases was noticed in the electrodeposited coating. The obtained result showed that the electrodeposited Co-Ni-Fe produced with 10 cycles has the same contact resistance as ENIG which is 1.6 Ω. 20 cycles of CV produced 1.4 Ω of contact resistance, slightly smaller than the other FPCs. This research revealed that electrodeposited Co-Ni-Fe is suitable to be applied as a protective coating while still maintaining the electrical properties of FPCs.

• Periodical: Advanced Materials Research (Volume 1113)
• Pages: 545-549
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1113.545
• Online since: July 2015
• Authors: Athirah Ahmad*, Koay Mei Hyie, N.R. Nik Roselina, Firdaus Munir, Choong Soo Li, Sheridan Saidin
• Keywords: Co-Ni-Fe, Electrical Properties, Electrodeposition, Flexible Printed Circuits, Thin Film

References

[1] D.S. Briggs, S.C. Perzanoski, Flexible Printed Circuits, US Patent Application Publication, US2014/0190729A1 (2014).

[2] C.J. Ahn, S.W. Kim, K.N. Lee, B.Y. Myong, D.Y. Won, Polyimide Film, Patent, WO20112081763A1 (2014).

[3] A. Siewiorek, A. Kudyba, N. Sobczak, M. Homa, Z. Huber, Z. Adamek, J. Wojewoda Budka, Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy, Journal of Materials Engineering and Performance, 22 (2013).

DOI: 10.1007/s11665-013-0492-4

[4] W. S Chao, W. H Wang, T. C Luo, T. C Huang, M. C Liao, T. H Wei, The comparison on the corrosion resistance of different kinds of PCB surface finishing : OSP, LF HASL and ENIG, IEEE (2012).

DOI: 10.1109/impact.2012.6420301

[5] X.M. H, Zhong W, Qi X S, et al. Highly stable Fe-Ni alloy nanoparticles encapsulated in carbon nanotubes. J Alloys Comps 495 (2010) 200−204.

DOI: 10.1016/j.jallcom.2010.01.121

[6] M.M. Abou Krisha, Corrosion resistance and electrodeposition behavior of electrodeposited nickel-cobalt- alloys, Anti- corsrosion methods and materials, 59/4 (2012) 170 - 177.

DOI: 10.1108/00035591211241998

[7] Koay Mei Hyie, Nor Azrina Resali, Wan Normimi Roslini Abdullah, Study of Alloys Addition to the Electrodeposited Nanocrystalline Cobalt, Advanced Materials Research Vol. 486 (2012) 108-113.

DOI: 10.4028/www.scientific.net/amr.486.108

[8] Nor Azrina Resali, Koay Mei Hyie, Wan Normimi Roslini Abdullah, M.A.A. Ghani, A. Kalam, The effect of bath pH on the phase formation of ternary Co-Ni-Fe nano-coatings, Applied mechanics and materials vol. 391 (2013) 9-13.

DOI: 10.4028/www.scientific.net/amm.391.9

[9] Jian-mei Li, Effect of boron/phosphorus-containing additives on electrodeposited CoNiFe soft magnetic thin Films, Trans. Nonferrous Met. Soc. China 23 (2013) 674 – 680.

DOI: 10.1016/s1003-6326(13)62515-7

[10] I. Hanafi A.R. Daud, S. Radiman, Cyclic Voltammetric Study of Co-Ni-Fe Alloys Electrodeposition in Sulfate Medium, AIP Publishing, (2013) 120-124.

DOI: 10.1063/1.4858640

[11] Z. Chen, L. Hao, Q. Song, C. Chen, A Rapid One-Step Process for Fabrication of Superhydrophobic Surface by Electrodeposition Method, Eectrochimica Acta, 59 (2012) 168– 171.

DOI: 10.1016/j.electacta.2011.10.045

[12] C-P. Lin, C-M. Chen, Solid-state interfacial reactions at the solder joints employing Au/Pd/Ni and Au/Ni as the surface finish metallizations, Microelectronics Realibility, 52 (2012) 385 – 390.

DOI: 10.1016/j.microrel.2011.03.007