Modeling of Anisotropic Plastic Behavior of Advanced High Strength Steel Sheet TRIP 780

Sansot Panich; Viton Uthaisangsuk; Surasak Suranuntchai; Suwat Jirathearanat

doi:10.4028/www.scientific.net/AMR.410.232

Paper Titles

Effect of h-BN Content on the Sintering of SS316L/h-BN Composites
p.216

Adsorption of Ammonium Sulfate Using Fabricated Zeolite from Waste Sludge of Water Treatment Plant
p.220

Synthesis and Characterization of Al-Alloy/SiC_p Nanocomposites Employing High Energy Ball Milling and Spark Plasma Sintering
p.224

Characterization of Precipitated Calcium Carbonate from Eggshell Powder
p.228

Modeling of Anisotropic Plastic Behavior of Advanced High Strength Steel Sheet TRIP 780
p.232

Effect of Cryogenically Treated Electrode during AEDM of Nickel Based Super Alloy 718 for Surface Quality Improvement
p.236

Aging Behaviors of Al 6061 and Al 6061/SiCp Composite
p.240

Evaluation of Surface Quality during Electrical Discharge Machining of Inconel 718 with Powder Metallurgy Electrodes
p.245

Optimization of the Process Parameters for Drilling of Metal Matrix Composites (MMC) Using Taguchi Analysis
p.249

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 410Modeling of Anisotropic Plastic Behavior of...

Modeling of Anisotropic Plastic Behavior of Advanced High Strength Steel Sheet TRIP 780

Abstract:

Anisotropic plastic behavior of advanced high strength steel sheet of grade TRIP780 (Transformation Induced Plasticity) was investigated using three different yield functions, namely, the von Mises’s isotropic, Hill’s anisotropic (Hill’48), and Barlat’s anisotropic (Yld2000-2d) criterion. Uniaxial tensile and balanced biaxial test were conducted for the examined steel in order to characterize flow behavior and plastic anisotropy for different stress states. Especially, disk compression test was performed for obtaining balanced r-value. All these data were used to determine the anisotropic coefficients. As a result, yield stresses and r-values for different directions were calculated according to these yield criteria. The results were compared with experimental data. To verify the modelling accuracy, tensile tests of various notched samples were carried out and stress-strain distributions in the critical area were characterized. By this manner, the effect of stress triaxiality due to different notched shapes on the strain localization calculated by the investigated yield criteria could be studied.

You might also be interested in these eBooks

Processing and Fabrication of Advanced Materials

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 410)

Pages:

232-235

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.410.232

Citation:

Cite this paper

Online since:

November 2011

Authors:

Sansot Panich, Viton Uthaisangsuk, Surasak Suranuntchai, Suwat Jirathearanat

Keywords:

Anisotropy, Notched Samples, TRIP Steel, Yield Function

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] R. von Mises: Göttinger Nachrichten Math. Phys. Klasse (1913), pp.582-592.

Google Scholar

[2] R. Hill, in: Proceeding of Royal Society, London, A193 (1948), pp.281-297.

Google Scholar

[3] F. Barlat, J.C. Brem, J. W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghart, S.H. Choi and E. Chu: International Journal of Plasticity, Vol. 19 (2003), pp.1297-1319.

DOI: 10.1016/s0749-6419(02)00019-0

Google Scholar

[4] L. Xu and F. Barlat, in: Proceeding of 9th International Conference on Technology of Plasticity, Gyeongju, Korea (2008), pp.2312-2317.

Google Scholar

[5] R.F. Young, J.E. Bird and J.L. Duncan: J. of Applied Metalworking Vol. 2 (1981), pp.11-18.

Google Scholar

[6] W.F. Hosford, in: Proceeding of 7th North American Metalworking Conf. SME, Dearborn, MI (1979), pp.191-197.

Google Scholar