Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 – xBa(Ti0.95Zr0.05)O3 Solid Solution Ceramics

N. Sawangwan; J. Tontrakoon; S. Sirisoonthorn; Tawee Tunkasiri

doi:10.4028/www.scientific.net/AMR.55-57.73

Paper Titles

Relationships between Processing Parameters and Properties of PZT Ceramics
p.57

Synthesis of Conducting Polymer Films by Plasma Polymerization Process
p.61

Chemical Synthesis and Characterization of ZnTiO₃ Powder Prepared by the Coprecipitation Oxalate Method
p.65

Dielectric and Piezoelectric Properties of B₂O₃ and SnO₂ Doped Barium Titanate Ceramics
p.69

Ferroelectricity of (1-x)(Bi_0.5Na_0.5)TiO₃– xBa(Ti_0.95Zr_0.05)O₃ Solid Solution Ceramics
p.73

Effect of Calcination Temperature on Phase and Morphology of Sol-Gel Derived PZTN Powders
p.77

BaMnTiO₃Synthesized by the Oxalate and Impregnation Methods
p.81

Ammonothermal Preparation of Barium Zirconate Fine Powders
p.85

Effect of Al₂O₃Addition on Dielectric, Piezoelectric and Ferroelectric Properties of 0.2Pb(Zn_1/3Nb_2/3)O₃–0.8Pb(Zr_1/2Ti_1/2)O₃ Ceramics
p.89

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 55-57Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 –...

Ferroelectricity of (1-x)(Bi_0.5Na_0.5)TiO₃– xBa(Ti_0.95Zr_0.05)O₃ Solid Solution Ceramics

Abstract:

(1-x)(Bi0.5Na0.5TiO3)-xBa(Ti0.95Zr0.05)O3 ceramics were prepared by the mixed oxide technique and their dielectric, piezoelectric and ferroelectric properties determined in detail in the range x = 0.06 to 0.09. At x = 0.07 the maximum relative permittivity of 1338 and piezoelectric constant of 167 pC/N were obtained. It was concluded that 0.93(Bi0.5Na0.5TiO3)-0.07Ba(Ti0.95Zr0.05)O3 is the morphotropic phase boundary region for this system.