Micro Milling for Polymer Materials Used in Prototyping of Microfluidic Chip Application

Aramcharoen Ampara; Kah Chuan Sean Shaw; Kui Liu

doi:10.4028/www.scientific.net/AMR.565.552

Paper Titles

Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC
p.529

A Processing Technical Analysis for the Characteristics of Forces and Surface Roughness in Micro-Scale Milling
p.535

Experimental Study on Cutting Performance in Micro-Grinding Hard Brittle Materials
p.541

Atomic-Scale Grooving on Copper: End-Milling vs. Peripheral-Milling
p.546

Micro Milling for Polymer Materials Used in Prototyping of Microfluidic Chip Application
p.552

An Experimental Study of the Effect of Cutting Parameters on Micro Milling Process
p.558

Mechanical Properties and Deformation of LiTaO₃ Single Crystals Characterised by Nanoindentation and Nanoscratch
p.564

Determination of the Minimum Depth of Cut in Nanometric Machining Using Molecular Dynamics Simulation
p.570

A Non-Dimensional Analysis of Tool Edge Radius Effect on the Mechanics of Micromachining
p.576

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 565Micro Milling for Polymer Materials Used in...

Micro Milling for Polymer Materials Used in Prototyping of Microfluidic Chip Application

Abstract:

Micro milling is one of the processes that can be used in microfluidic devices fabrication. It has shown the capability for producing the freeform geometries, cost and time effectively. This paper presents the cutting strategies for micro milling process for an application of microfluidic device. The proposed strategies demonstrated the capability of micro milling process to fabricate microchannel and micropillar array from biocompatible polymer materials with good machined surface quality and high aspect ratio of up to three.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 565)

Pages:

552-557

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.565.552

Citation:

Cite this paper

Online since:

September 2012

Authors:

Aramcharoen Ampara, Kah Chuan Sean Shaw, Kui Liu

Keywords:

Micro Milling, Micro-Fluidics, PC, PMMA

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] H. -J. Kang and S. -H. Ahn: Proc IMechE Part B: Journal Engineering Manufacturing, Vol. 221 (2007), pp.231-240.

Google Scholar

[2] S. Dimov, D.T. Pham, A. Ivanov, K. Popov and K. Fanden: Proc of the IMechE, Part B: Journal of Engineering Manufacture Vol. 218 (2007), pp.731-736.

Google Scholar

[3] E. Vázquez, C.A. Rodríguez, A. Elías-Zúñiga and J. Ciurana: International Journal of Advanced Manufacturing Technology, Vol. 51 (2010), pp.945-955.

Google Scholar

[4] A.L. Jauregui, H.R. Siller, C.A. Rodriguez and A. Elias-Zuniga: International Journal Advanced Manufacturing Technology, Vol. 48 (2010), pp.963-972.

Google Scholar

[5] S. -i. Hira and M. Yoshioka: Key Engineering Materials, Vol. 329 (2007), pp.577-582.

Google Scholar

[6] K. Okuda, T. Tsuneyoshi, W. Li and H. Shibahara: Key Engineering Materials, Vol. 407-408 (2009), pp.351-354.

DOI: 10.4028/www.scientific.net/kem.407-408.351

Google Scholar