The Trouble-Shooting for the Over-Current in AC Inverter of Tanker

Abstract:

During the drive speed operation with motor, due to the big difference between the synchronous speed and the motor speed, it likely causes too much current. When the current exceeds a certain limit, it will cause the drive to current protection of the acceleration. For the over-current drive in the tanker case, by analyzing the causes of over-current proceeding, the key points are described from the load check, the drive hardware check, the parameters check, input/output circuit inspection and so on. When the large start torque or acceleration torque is necessary, the motor torque of about 100 to 150% can be generated in the low frequency area by adjusting the torque boost.

• Periodical: Advanced Materials Research (Volumes 591-593)
• Pages: 1342-1345
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.591-593.1342
• Online since: November 2012
• Authors: Fang Yuan Li
• Keywords: AC Inverter, Over-Current Fault, Tanker

References

[1] Lu Jianxiang, Zhang Qiangsheng and Cao Huimin, A Portable Solar Power Supply Device with High-Efficiency Inverter, Proceedings of ISES World Congress 2007 (Vol. I – Vol. V), P1473-1477.

DOI: 10.1007/978-3-540-75997-3_299

[2] Mehmed Çelebi and İrfan Alan, A novel approach for a sinusoidal output inverter, Electrical Engineering (Archiv fur Elektrotechnik), 2010, Volume 92, P239-244.

DOI: 10.1007/s00202-010-0181-3

[3] Z. G¨ung¨or and F. ArIkan, Using fuzzy decision making system to improve quality-based investment, Journal of Intelligent Manufacturing, Vol. 18, no. 2(2007), pp.197-207.

DOI: 10.1007/s10845-007-0016-x