The Influence of Micro Algae on Corrosion of Steel in Fly Ash Geopolymer Concrete: A Preliminary Study

Abstract:

Chloride is not the only main cause of corrosion of reinforced concrete structures in seawater environment. Microorganisms, such as bacteria and microalgae, in the seawater can induce microbiologically influenced corrosion (MIC) that leads to degradation of the concrete structures by formation of biofilm on the metallic surface. In this preliminary study, the impact of microalgae on the corrosion of steel reinforced bars in fly ash geopolymer concrete was studied. Corrosion potential, algae cells number, and pH measurement were carried out for fly ash geopolymer concrete and a control mix (Ordinary Portland Cement) samples. The results indicate that the corrosion potential of fly ash geopolymer concrete was influenced by the cathodic reaction during photosynthesis activities. The geopolymer concrete in algae-inoculated medium was found to be more tolerant to algal growth than the control mix (OPC concrete). There was a positive correlation between algae cell densities and the potential reading of the geopolymer.

• Periodical: Advanced Materials Research (Volume 626)
• Pages: 861-866
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.626.861
• Online since: December 2012
• Authors: Monita Olivia, Navid Moheimani, Reza Javaherdashti, Hamid R. Nikraz, Michael A. Borowitzka
• Keywords: Algae, Biofilm, Corrosion, Geopolymer, pH

References

[1] N. De Belie, J. Monteny, A. Beeldens, E. Vincke, D. Van Gemert, and W. Verstraete: Cement and Concrete Research Vol 34 (2004) p.2223.

DOI: 10.1016/j.cemconres.2004.02.015

[2] R. Javaherdashti: Microbiologically Influenced Corrosion- An Engineering Insight. (Springer-Verlag, London 2008).

[3] R.G. Edyvean, and L.A. Terry, in: The influence of micro-algae on corrosion of structural steels used in the North Sea, edited by T.A. Oxley, and S. Barry, volume 5 Biodeterioration, John Wiley and Sons (1983).

[4] L.A. Terry, and R.G.J. Edyvean, in: Algal Biofouling, edited by L.V. Evans, and K.D. Hoagland, Elsevier (1986).

[5] R. Javaherdashti, H. Nikraz, M. Borowitzka, N. Mohaemani, and M. Olivia: European Journal of Scientific Research Vol 36 (2009) p.394.

[6] T. Bakharev: Cement and Concrete Research Vol 35 (2005) p.1233.

[7] X. Song: Development and Performance of Class F Fly Ash Based Geopolymer Concretes against Sulphuric Acid Attack (School of Civil and Environmental Engineering, The University of New South Wales, Australia 2007).

[8] J.M. Miranda, A. Fernandez-Jimenez, J.A. Gonzalez, and A. Palomo: Cement and Concrete Research Vol 35 (2005) p.1210.

[9] D.M. Bastidas, A. Fernandez-Jimenez, A. Palomo, and J.A. Gonzalez: Corrosion Science Vol 50 (2008) p.1058.

[10] Shindunata, J.S.J. van Deventer, G.C. Lukey, and H. Xu: Industrial & Engineering Chemistry Research Vol 45 (2006) p.3559.

[11] M. Olivia, and H. Nikraz: Materials and Design Vol 36 (2012) p.191.

[12] N. R. Moheimani: The Culture of Coccolithophorid Algae for Carbondioxide Bioremediation, (School of Biological Sciences and Biotechnology, Murdoch University, Australia 2005).

[13] O. Aviam, G. Bar-Nes, Y. Zeiri, A. Sivan: Applied and Environmental Microbiology Vol 70 (2004) p.6031.

[14] B.P. Guilbeau, F.P. Harry, R.P. Gambrell, F.C. Knopf, and K.M. Dooley: Ecological Engineering Vol 20 (2003) p.309.

[15] B. Little, R. Day, P. Wagner, Z. Lewandowski, W.L. Lee, W.G. Charcklis, and F. Mansfeld: Biofouling Vol 3 (1991) p.45.

[16] N.J.E. Dowling, J. Guezennec, J. Bullen, B. Little, and D.C. White: Biofouling Vol 5 (1992) pp.315-322.