Mechanism of Flow Properties for Biodiesel Blends at Low Temperature

Article Preview

Abstract:

The chemical composition of biodiesel was analyzed by gas chromatography-mass spectrometry. The cold filter plugging point of biodiesel was measured according to GB/T 20828-2007. The cold flow properties of biodiesel were investigated on the basis of the crystallization theory, including chemical composition and molecular structure. Biodiesel might be considered a pseudobinary mixture, namely, high-melting-point saturated fatty acid methyl esters and low–melting-point unsaturated ones. Bilayer crystal structure of biodiesel was founded. Bilayer structure with headgroups aligned next to each other inside the crystal and away from nonpolar bulk liquid was large platelet lamellae. The results showed that biodiesel was mainly composed of saturated fatty acid methyl esters (C14:0~C24:0 ) and unsaturated ones(C16:1~C22:1、C18:2 and C18:3 ). The cold flow properties for biodiesel were determined mainly by the amount and molecular structure of saturated fatty acid methyl esters. The long-straight-chain saturated fatty acid methyl esters tend to have relatively poor cold flow properties. The cold flow properties worsen with increasing the amount and carbon chain length of straight-chain saturated fatty acid methyl esters. The ways of adjusting biodiesel composition and treating with depression of cold filter plugging point were given; they could improve cold flow properties.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

490-497

Citation:

Online since:

February 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] M.E. Gonzalez Gomez, R. Howard Hildige, J.J. Leahy, etc. Winterisation of waste cooking oil methyl ester to improve cold temperature fuel properties [J]. Fuel, 2002, 81: 33-39.

DOI: 10.1016/s0016-2361(01)00117-x

Google Scholar

[2] Chuang-Wei Chiu, Leon G. Schumacher, Galen J. Suppes. Impact of cold flow improvers on soybean biodiesel blend [J]. Biomass and Bioenergy, 2004, 27: 485-491.

DOI: 10.1016/j.biombioe.2004.04.006

Google Scholar

[3] Nestor U. Soriano Jr., Veronica P. Migo, Masatoshi Matsumura. Ozonized vegetable oil as pour point depressant for neat biodiesel [J]. Fuel, 2006, 85: 25–31.

DOI: 10.1016/j.fuel.2005.06.006

Google Scholar

[4] Ayhan Demirbas. Biodiesel: A Realistic Fuel Alternative for Diesel Engines [M]. London: Springer, 2008. 116.

Google Scholar

[5] Eiji Minami, Shiro Saka. Kinetics of hydrolysis and methyl esterification for biodiesel production in two-step supercritical methanol process [J]. Fuel, 2006, 85: 2479–2483.

DOI: 10.1016/j.fuel.2006.04.017

Google Scholar

[6] Umer Rashid, Farooq Anwar. Production of biodiesel through optimized alkaline-catalyzed transesterification of rapeseed oil [J]. Fuel, (2007).

DOI: 10.1016/j.fuel.2007.05.003

Google Scholar

[7] Ze-bo LI, Wei DU, De-hua LIU. Effect of phospholipids and water contents on production of bio-diesel fuel catalyzed by lipases in a solvent system [J]. Journal of Chemical Industry and Engineering (China), 2007, 58(1): 233-237.

Google Scholar

[8] Xiu CHEN, Yin-nan YUAN. Biodiesel preparation in supercritical fluids. Journal of the Chinese Cereals and Oils Association (China), 2007, 22(6): 95-99.

Google Scholar

[9] Cherng-Yuan Lin, Hsiu-An Lin. Diesel engine performance and emission characteristics of biodiesel produced by the peroxidation process [J]. Fuel, 2006, 85: 298-305.

DOI: 10.1016/j.fuel.2005.05.018

Google Scholar

[10] Yin-nan YUAN, Tian ZHANG, De-qing MEI, etc. Investigation on combustion characteristic of direct injection diesel engine fuelled with biodiesel [J]. Transactions of CSICE (China), 2007, 25(1): 43-46.

Google Scholar

[11] Chao HE, Yun-shan GE, Xiu-kun HAN, etc. Combustion Characteristics of Direct Injection Diesel Engine Fueled with Biodiesel [J]. Internal Combustion Engine Engineering (China), 2007, 28(6): 7-11.

Google Scholar

[12] C.D. Rakopoulos, D.C. Rakopoulos, D.T. Hountalas, etc. Performance and emissions of bus engine using blends of diesel fuel with bio-diesel of sunflower or cottonseed oils derived from Greek feedstock [J]. Fuel, 2008, 87: 147-157.

DOI: 10.1016/j.fuel.2007.04.011

Google Scholar

[13] Auschra, C., J. Vetter, U. Bohmke, etc. Methacrylate Copolymers as Low-Temperature Flow Improvers for Biodiesel Fuels and Biologically-Derived Fuel Oils [P]. WO 99/27037, 2000-05-19.

Google Scholar

[14] Scherer, M., and J. Souchik. Synthesis of Long-Chain Polymethacrylates by Atom Transfer Radical Polymerization for Manufacture of Lubricating Oil Additives [P]. WO 01/40334, 2002-05-28.

Google Scholar

[15] Scherer, M., J. Souchik, and J.M. Bollinger. Block Copolymers of Long-Chain Alkyl Methacrylates and Acrylates as Lubricating Oil and Biodiesel Additives [P]. WO 01/40339, 2002-05-28.

Google Scholar

[16] Wei HAN, Mei YANG, Chang-sheng LIU, etc. Research on matching of cold flow improvers for biodiesel [J]. Applied Chemical Industry (China), 2007, 36(10): 964-967.

Google Scholar

[17] Noureddini, H. Process for Producing Biodiesel Fuel with Reduced Viscosity and a Cloud Point Below thirty-two(32) degrees Fahrenheit [P]. US 6 015 440, 2000-01-18.

Google Scholar

[18] Gerhard Knothe. Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters [J]. Fuel Processing Technology, 2005, 86: 1059-1070.

DOI: 10.1016/j.fuproc.2004.11.002

Google Scholar

[19] Hiroaki Imahara, Eiji Minami, Shiro Saka. Thermodynamic study on cloud point of biodiesel with its fatty acid composition [J]. Fuel, 2006, 85: 1666–1670.

DOI: 10.1016/j.fuel.2006.03.003

Google Scholar

[20] Miao-xin WU, Guo-ying WU, Hui XUAN, etc. Influencing factors of low-temperature flowing properties of soybean oil [J]. Journal of Fuel Chemistry and Technology (China), 2005, 33(6): 698-702.

Google Scholar

[21] Rushang M. Joshi, Michael J. Pegg. Flow properties of biodiesel fuel blends at low temperatures [J]. Fuel, 2007, 86: 143-151.

DOI: 10.1016/j.fuel.2006.06.005

Google Scholar

[22] Ji-Yeon Park, Deog-Keun Kim, Joon-Pyo Lee, etc. Blending effects of biodiesels on oxidation stability and low temperature flow properties [J]. Bioresource Technology, 2008, 99: 1196–1203.

DOI: 10.1016/j.biortech.2007.02.017

Google Scholar

[23] M. Mittelbach, C. Remschmidt. Biodiesel: The Comprehensive Handbook [M]. U.S.: Department of Energy. 2006. 29-30.

Google Scholar

[24] Xiu CHEN, Yin-nan YUAN, Ping SUN, etc. Effects of structure features of the fatty acid methyl esters upon the cetane number of biodiesel [J]. Chemical Engineering of Oil & Gas (China), 2007, 36(6): 481-485.

Google Scholar

[25] Allan S. Myerson. Handbook of Industrial Crystallization [M]. Elsevier Science & Technology Books. 2001. 16-18.

Google Scholar

[26] Jing-zhong CHEN. Modern Crystal Chemistry: Theories and Technique [M]. Higher Education Press (China). 2001. 127.

Google Scholar

[27] Frank D. Gunstone, John L. Harwood, Albert J. Dijkstra. The Lipid Handbook (Third Edition) [M]. CRC. 2007. 472.

Google Scholar