Synthesis and Characterization of Nano CuO-ZrO₂ Mixed Oxide

Abstract:

Nano CuO-ZrO2 mixed oxides were prepared by wet chemical method by mixing equimolar solutions (0.45M) of cupric chloride (1.92g) and Zirconium oxychloride (3.63g) in aqueous Sodium hydroxide and refluxed at elevated temperature. The prepared nano CuOZrO2 mixed oxides were characterized by FT-IR, SEM, EDAX, XRD, DSC and CV studies. From XRD studies the size of the nano CuO and ZrO2 are found to be 25 and 9.5nm respectively through Debye-Scherrer's formula. The sizes of the CuO-ZrO2 mixed oxide particles have also been characterized and the average grain size of the particles is found to be 24nm in diameter. The nano particle composition and morphology of CuO, ZrO2 and mixed oxide have been analysed by EDAX set up attached with scanning electron microscope (SEM). EDAX analysis indicates the presence of Cu, Zr and O. SEM morphological studies of CuO, ZrO2 and mixed CuO-ZrO2 revealed the particle distribution with uniform granular structure. Cyclic Voltammetric studies exhibit good adherent behaviour on electrode surface and good electroactivity at pH 1.0. Nano CuO, ZrO2 and mixed CuO-ZrO2 under goes oxidation at 0.224V, 0.092V -0.072V and0.198V respectively. DSC thermogram of CuO, ZrO2 and mixed CuO-ZrO2 are recorded at the heating rate of 10o/ min. The glass transition temperature (Tg), the crystallization temperature (Tc) and melting point (TM) of the mixed oxide are determined from the DSC curve. The Tg value of CuOZrO2 mixed oxide is -50o C the Tc value is 20o C and melts at a temperature of 116o C.

• Periodical: Advanced Materials Research (Volume 678)
• Pages: 50-55
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.678.50
• Online since: March 2013
• Authors: R.R. Muthuchudarkodi, Chinnapiyan Vedhi
• Keywords: CuO-ZrO₂, Cyclic Voltammetry (CV), EDAX, Nanocopper Oxide, Nanozirconium Oxide

References

[1] Jolivet J.P. (2000) Metal oxide chemistry and synthesis, Wiley, Chichester.

[2] J.R. Heath, Acc. Chem. Res. 32 (1999) 388.

[3] H. Sakaki, H. Noge, Nanostructures and Quantum Effects, Springer, Berlin, (1994).

[4] D.L.L. Pelecky, R.D. Rieke, Chem. Mater. 8 (1996) 1770.

[5] Frietsch,M., Zudock,F., Goschnick,J. and Bruns, M. (2000) CuO catalytic membrane as selectivity trimmer for Metal oxide gas sensors. Sens. ActuatorsB65, pp.379-381.

DOI: 10.1016/s0925-4005(99)00353-6

[6] Maruyama,T. (1998) Copper oxide thin films prepared by chemical vapour deposition from copper dipivalolyl methanate. Sol. Energy. Mater. Sol. cells 56, pp.85-92.

DOI: 10.1016/s0927-0248(98)00128-7

[7] Dai P.C., Mook, H.A. Aeppli, G., Hayden,S. M and Dogan, F. (2000) Resonance as a measure of pairing correlations in the high-Tc superconductor YBaCuO, Nature 406, pp.965-305.

DOI: 10.1038/35023094

[8] Deng J.F., SunQ., Zhang, Y.L., Chen, S.Y. and Wu, D. (1996) A novel process for preparation of Cu/ZnO/AlO ultrafine catalyst for methanol synthesis from CO+H comparison of various preparation methods. Appl. Catal. A139, pp.75-85.

DOI: 10.1002/chin.199643018

[9] G. C. Chinchen, P. J. Denny, J. R. Jennings, M. S. Spencer andK. C. Waugh, Appl. Catal., 1988, 36, 1–65.

[10] R. A. Ko¨ ppel, C. Sto¨ cker and A. Baiker, J. Catal., 1998, 179, 515–527.

[11] S. Fujita, Y. Kanamori, A. M. Satriyo and N. Takezawa, Catal. Today, 1998, 45, 241–244.

[12] B. Denise and R. P. A. Sneeden, Appl. Catal., 1986, 28, 235–239.

[13] Y. Amenomiya, Appl. Catal., 1987, 30, 57–68.

[14] I. A. Fisher, H. C. Woo and A. T. Bell, Catal. Lett., 1997, 44, 11–17.

[15] R. A. Ko¨ ppel, A. Baiker and A. Wokaun, Appl. Catal., 1992, 84, 77.

[16] Y. Nitta, T. Fujimatsu, Y. Okamoto and T. Imanaka, Catal. Lett., 1993, 17, 157–165.

[17] J. Wambach, A. Baiker and A. Wokaun, Phys. Chem. Chem. Phys., 1999, 1, 5071–5080.

DOI: 10.1039/a904923a

[18] Guedes, M., Ferreira, J.M.F. and ferro A.C. (2009) dispersion of CuO particles in aqueous suspensions containing 4, 5-dihydroxy1, 3-benzenedisulphonicacid disodiumsalt. J. Ceram. Int. 35, p.1939-(1945).

[19] Du,F., Liu, J. and Guo,Z. (2009) Shape controlled synthesis of CuO and its catalytic application to synthesise amorphous carbon nanofibres. J. Mater. Res. Bull. 44, pp.25-29.

[20] Yu Li, Synthesis of Copper (II) Oxide Particle and Detection of Photoelectrochemically Generated Hydrogen, 2008 NNIN REU Research Accomplishments pg-46.