Optimizing the Coupling of a Firebrand Generator to a Horizontal Wind Tunnel

Abstract:

Australia is considered as the most fire-prone country in the world. Spotting ignition by lofted firebrands is the main mechanism of fire spread. Many experimental studies have been conducted to evaluate the effect of the firebrand attacks on structures and to identify possible solutions. The experimental facility consists of a firebrand generator coupled to a wind tunnel. The wind speed in the firebrand generator is relatively low, in order to assure a quality continuous flow of glowing firebrands. On the contrary, the wind speed in the wind tunnel is high to duplicate actual firebrand attacks. Previous works show a highly turbulent region above the entrance of firebrands to the wind tunnel which is formed because of the velocity difference and penetration of firebrand entrance hose into the wind tunnel. The penetration is required to provide a uniform firebrand distribution along the height of the test section. In this computational work, the influence of the height of the entrance hose, its orientation respect to the tunnel and the distance between the coupling port and the test section are analyzed. The optimized results are presented and discussed for a variety of wind speeds within the wind tunnel and the firebrand generator.

• Periodical: Advanced Materials Research (Volumes 726-731)
• Pages: 971-976
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.726-731.971
• Online since: August 2013
• Authors: Javad Hashempour, Ahmad Sharifian
• Keywords: Bushfire, Firebrand, Wind Speed, Wind Tunnel

References

[1] P.A Cameron, Mitra B, Fitzgerald M, Scheinkestel CD, Stripp A, Batey C, Niggemeyer L, Truesdale M, Holman P, Mehra R, Wasiak J & Cleland H, "Black Saturday: the immediate impact of the February 2009 bushfires in Victoria'', Australia, volume 191 No 1, 2009.

DOI: 10.5694/j.1326-5377.2009.tb02666.x

[2] J. Mitchell, "Wind enabled ember dousing''; Fire safety journal, 41, 2006, pp.444-458.

DOI: 10.1016/j.firesaf.2006.04.002

[3] Manzello, S.L., John R. Shields, J.R., Cleary, T.G., Maranghides, A., Mell, W.E., Yang, J.C., Hayashi, Y., Nii, D. & Kurita, T. "On the development and characterization of a firebrand generator'', Fire safety journal, 43, 2008, pp.258-268.

DOI: 10.1016/j.firesaf.2007.10.001

[4] S.L .Manzello,Park, S.H., Suzuki, S., Shields, J.R.& Hayashi, Y., "Experimental investigation of structure vulnerabilities to firebrand showers'', Fire safety journal, 46,2011 , pp.568-578.

DOI: 10.1016/j.firesaf.2011.09.003

[5] S.Manzello,Suzuki, S. & Hayashi, Y., " Enabling the study of structure vulnerabilities to ignition from wind driven firebrand showers: A summary of experimental results'', Fire safety journal, 2012.

DOI: 10.1016/j.firesaf.2012.06.012

[6] S.Suzuki, , Manzello, S.L. & Hayashi,Y., The size and mass distribution of firebrands collected from ignited building components exposed to wind, Fire safety journal, 2012.

DOI: 10.1016/j.proci.2012.06.061

[7] R. Fox, Pritchard, P.J. & McDonald, A.T., Introduction to fluid mechanic, Seventh edition, John Wiley & Sons, Inc. 2009.

[8] I.K .Knight, "The design and construction of a vertical wind tunnel for the study of untethered firebrands in flight''. Fire Technology, 37, 2001, pp.87-100.

[9] S.L. Manzello,. & Suzuki, S., "The new and improved NIST Dragon's LAIR (Lofting and Ignition Research) facility'', Fire and Materials Journal, 2011.

DOI: 10.1002/fam.1123