Effect of Pull-Out Rate on Interfacial Bonding Strength of Fiber

Abstract:

This paper investigates the effect of different pull-out rates on interface bonding strength. The experimental results show that rate effect is also another significant effect factor which contributes to optical interface bonding strength. In the uniaxial tensile process, the interface bonding strength is attributed to the interplay between the shear force and the friction force. The critical strain rate for leading role between shear force and friction force is 10^-1.5, when less than that friction force dominates in the interface bonding mechanism, otherwise shear force dominates.

• Periodical: Advanced Materials Research (Volumes 807-809)
• Pages: 2831-2835
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.807-809.2831
• Online since: September 2013
• Authors: Zhi Yuan Pan, Xiang Liu
• Keywords: Friction, Interface Bonding Strength, Optic, Pull-Out Rate, Single Filament Fiber

References

[1] Leung C. K. Y., et al. Delamination detection in laminate composites with an embedded fiber optical interferometric sensor[J]. Sensors and Actuators A, 2005, 119(2): 336~344.

DOI: 10.1016/j.sna.2004.10.007

[2] Suopajarvi et al. Indicating cure and stress in composite containers using optical fibers[J]. Optical Engineering, 1995, 34(9): 2587~2591.

DOI: 10.1117/12.208131

[3] Lekakou S. C., et al. Optical fibre sensor for monitoring flow and resin curing in composites manufacturing[J]. Composites: Part A (S1359-835X), 2006, 37(6): 934~938.

DOI: 10.1016/j.compositesa.2005.03.003

[4] Dumitrescu O. R., et al. Near infrared spectroscopy for in-line monitoring during injection moulding[J]. Polymer Testing, 2005, 24(3): 367~375.

DOI: 10.1016/j.polymertesting.2004.10.003

[5] Frazao O., et al. Simultaneous measurement of pressure and temperature using single mode optical fibres embedded in a hybrid composite laminated[J]. Composites Science and Technology, 2005, 65(11): 1756~1760.

DOI: 10.1016/j.compscitech.2005.03.002

[6] Benchekchou B., Ferguson N. S. The effect of embedded optical fibres on the fatigue behaviour of composite plates [J]. Composite Structures, 1998(2), 41: 113~120.

DOI: 10.1016/s0263-8223(98)00034-8

[7] Hadzic R., et al. Structural integrity analysis of embedded optical fibres in composite structures[J]. Composite Structures, 1999, 47(1~4): 759~765.

DOI: 10.1016/s0263-8223(00)00050-7

[8] Ling H. Y., et al. Effects of embedded optical fibre on mode II fracture behaviours of woven composite laminates[J]. Composites: Part B, 2005, 36(6~7): 534~543.

DOI: 10.1016/j.compositesb.2005.01.008

[9] Surgeon M., Wevers M. Static and dynamic testing of a quasi-isotropic composite with embedded optical fibres[J]. Composites: Part A, 1999, 30(3~4): 317~324.

DOI: 10.1016/s1359-835x(98)00117-1

[10] Schaaf K., et al. Mechanical properties of composite materials with integrated embedded sensor networks[J]. Smart Structures and Materials 2005: Proc. of SPIE, 2005, 5765: 781~785.

DOI: 10.1117/12.600182

[11] Melin L. G., et al. A study of the displacement field around embedded fiber optic sensors[J]. Composites: Part A, 1999, 30(11): 1267~1275.

DOI: 10.1016/s1359-835x(99)00036-6

[12] Tanaka K., Minoshima K., Grela W., et al. Characterization of the aramid/epoxy interfacial properties by means of pull-out test and influence of water absorption［J］. Composites Science and Technology, 2002, 62(16): 2169-2177.

DOI: 10.1016/s0266-3538(02)00147-1