Influence of Load Signal Form and Variable Amplitude Loading on the Corrosion Fatigue Behaviour of Aluminium Alloys

Abstract:

Aluminium alloys are used for a large variety of safety relevant applications for example in the automotive and aviation industries. With the introduction of high strength but possibly less corrosion resistant alloys it is essential to determine if an enhanced sensitisation against corrosion comes into effect under simultaneous mechanical and corrosive loading. Within this work corrosion fatigue tests under constant and variable amplitude loading were carried out on aluminium alloys established for chassis applications such as EN AW-5018 with slightly elevated magnesium content (AlMg3.5Mn), EN AW-6082-T6, EN AW-6110A-T6 and EN AC‑42100-T6 as well as alloys sensitised to corrosion. Sensitisation was obtained by a borderline (17 h at 130 °C) and an excessive (500 h at 130 °C) thermal ageing treatment and elevated copper contents for the forged and cast alloys. Aforementioned alloys and material conditions were assessed concerning the impact of mechanical loading conditions such as load signal type (sinusoidal and square-wave signal), strain rate and load spectra on the damaging process and on corrosion fatigue life. Fatigue tests were complemented by simultaneous determination of electrochemical characteristics as well as the type of corrosion by metallographic investigations.

• Periodical: Advanced Materials Research (Volumes 891-892)
• Pages: 217-223
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.891-892.217
• Online since: March 2014
• Authors: Kathrin Bauer-Trossmann*, Liu Hao Yu, Tobias Melz, Matthias Oechsner, Heinz Kaufmann
• Keywords: Aluminum (Al), Corrosion Fatigue, Electrochemical Characteristics, Load Signal Form, Passivation, Variable Amplitude Loading

References

[1] K. Bauer, L. Yu, H. Hanselka, M. Oechsner: Reliable Qualification of Aluminium Alloys for Chassis Components, ATZ worldwide eMagazine (2012) 12.

DOI: 10.1007/s38311-012-0262-1

[2] C.M. Sonsino, A. Berg-Pollack, V. Grubisic: Structural Durability Proof of Automotive Aluminium Safety Components - Present State of the Art, Warrendale: Society of Automotive Engineers, SAE-Paper 2005-01-0800; SAE World Congress, Detroit, Michigan, 11-14. 04. (2005).

DOI: 10.4271/2005-01-0800

[3] E. Gaßner, F.W. Griese, E. Haibach: Ertragbare Spannungen und Lebensdauer einer Schweißverbindung aus St37 bei verschiedenen Formen des Beanspruchungskollektivs. Archiv f. d. Eisenhüttenwesen 35 (1964) 3, p.255–267.

DOI: 10.1002/srin.196402317

[4] M. Hanke: Eine Methode zur Beschreibung der Betriebslastkollektive als Grundlage für Betriebsfestigkeitsversuche. Automobiltechn. Z. 72 (1970) 3, p.91–97.

[5] T. Magnin: Corrosion fatigue mechanisms in metallic materials, in: P. Marcus (Ed. ), Corrosion Mechanisms in Theory and Practice, Marcel Dekker Inc., New York, 2002, pp.451-478.

DOI: 10.1201/9780203909188.ch13

[6] F.P. Ford, P.L. Andresen: Corrosion in Nuclear Systems: Environmentally assisted cracking in Light Water Reactors, in: P. Marcus (Ed. ), Corrosion Mechanisms in Theory and Practice, Marcel Dekker Inc., New York, 2002, pp.605-642.

DOI: 10.1201/9780203909188.ch17

[7] L. Yu, T. Troßmann, J. Grimm, K. Bauer, H. Kaufmann: Accelerated evaluation of the susceptibility of aluminium alloys to corrosion fatigue in de-icers using varying load waveforms, Presentation, European Corrosion Congress EUROCORR 2012, Istanbul, Turkey 09. -13. 09. (2012).

DOI: 10.1002/mawe.201100870