LED Heat Dissipation Analysis Using Composite Based Cylindrical Slug

Abstract:

The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports a simulation analysis on the heat dissipation of single chip LED package with based material, copper diamond (Cu/Dia) cylindrical heat slug.Ansys version 11 was utilized as the simulation platform. The junction temperature and stress of the LED chip under natural convection condition were evaluated with varied input power of 0.1 W, 0.5 W and 1 W. Results indicated the maximum junction temperature of LED chip was attained at input power of 1 W.

• Periodical: Advanced Materials Research (Volume 893)
• Pages: 803-806
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.893.803
• Online since: February 2014
• Authors: Zaliman Sauli*, Rajendaran Vairavan, Vithyacharan Retnasamy
• Keywords: ANSYS, Cu/Dia Cylindrical Heat Slug, Junction Temperature, LED, Von Mises Stress

References

[1] Y. J. Heo, H. T. Kim, K. J. Kim, S. Nahm, Y. J. Yoon, and J. Kim, Enhanced heat transfer by room temperature deposition of AlN film on aluminum for a light emitting diode package, Applied Thermal Engineering, vol. 50, pp.799-804, (2013).

DOI: 10.1016/j.applthermaleng.2012.07.024

[2] K. C. Yung, H. Liem, H. S. Choy, and W. K. Lun, Thermal performance of high brightness LED array package on PCB, International Communications in Heat and Mass Transfer, vol. 37, pp.1266-1272, (2010).

DOI: 10.1016/j.icheatmasstransfer.2010.07.023

[3] M.H. Chang, D. Das, P. V. Varde, and M. Pecht, Light emitting diodes reliability review, Microelectronics Reliability, vol. 52, pp.762-782, (2012).

DOI: 10.1016/j.microrel.2011.07.063

[4] A. Vipradas, A. Takawale, S. Tripathi, V. Swakul, A. Kaisare, and S. Tonapi, A parametric study of a typical high power LED package to enhance overall thermal performance, in Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2012 13th IEEE Intersociety Conference on, 2012, pp.308-313.

DOI: 10.1109/itherm.2012.6231445

[5] G. Zhang, S. Feng, L. Wang, C. Guo, X. Xie, and C. Ge, Thermal Analysis of the Multi-chip Vertical Packaged White LED, in Photonics and Optoelectronics, 2009. SOPO 2009. Symposium on, 2009, pp.1-4.

DOI: 10.1109/sopo.2009.5230158

[6] H. Ye, S. Koh, J. Wei, H. van Zeijl, and G. Zhang, Dynamic thermal simulation of high brightness LEDs with unsteady driver power output, in Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2012 13th International Conference on, 2012, p.1.

DOI: 10.1109/esime.2012.6191768

[7] Retnasamy, V., Sauli, Z., Rahman, N. A., Hatta, R. M., Vairavan, R., &Norhaimi, W. M. W., Gold ball shear stress analysis on different surface morphology, the Proceedings of International Conference on Computational Intelligence, Modelling and Simulation, 168-171, (2012).

DOI: 10.1109/cimsim.2012.88

[8] Sauli, Z., Retnasamy, V., Taniselass, S., Rahman, N. A. Z., & Aziz, M. H. A., Polymer core BGA stress analysis at minimal vertical loading, Advanced Materials Research Vols., 622-623, pp.639-642, (2013).

DOI: 10.4028/www.scientific.net/amr.622-623.639

[9] Z. Sauli, V. Retnasamy, R. Vairavan, W. M. W. N. Haimi, H. Kamarudin, Y. Neoh Fung, and N. Khalid, Solid State Lighting Stress and Junction Temperature Evaluation on Operating Power, in Computer Modelling and Simulation (UKSim), 2013 UKSim 15th International Conference on, 2013, pp.290-293.

DOI: 10.1109/uksim.2013.127